Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1321838 > unrolled thread

[PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core

Started byChen Feng <puck.chen@foxmail.com>
First post2016-01-29 16:40 +0100
Last post2016-02-01 10:00 +0100
Articles 3 — 3 participants

Back to article view | Back to linux.kernel


Contents

  [PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng <puck.chen@foxmail.com> - 2016-01-29 16:40 +0100
    Re: [PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Lee Jones <lee.jones@linaro.org> - 2016-02-01 09:40 +0100
      Re: [PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng <puck.chen@hisilicon.com> - 2016-02-01 10:00 +0100

#1321838 — [PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core

FromChen Feng <puck.chen@foxmail.com>
Date2016-01-29 16:40 +0100
Subject[PATCH v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core
Message-ID<qWjjs-59f-17@gated-at.bofh.it>
The patch sets add support for Hi6220 PMIC Hi655x MFD core and its
regulator driver.
  Current testing and support board is Hikey which is one of 96boards.
  It is an arm64 open source board. For more information about this board,
  please access https://www.96boards.org.

  This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
  Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
  We can use memory-mapped I/O to communicate.

  +----------------+             +-------------+
  |                |             |             |
  |    Hi6220      |   SSI bus   |   Hi655x    |
  |                |-------------|             |
  |                |(REGMAP_MMIO)|             |
  +----------------+             +-------------+

  V2: Code refactoring of regulator.

  V3: Drop mtcmos from this patch and use regmap-irq.

  V4: Move the vset-table to driver code and donot open code for it.

  V5: Use regulators_node and of_match, donot open code fot it.

  V7: Change the constraints into hikey.dts and fix code in PMIC.

Chen Feng (5):
  mfd: hi655x: Add document for mfd hi665x PMIC
  regulator: hi655x: Document for hi655x regulator
  mfd: hi655x: Add MFD driver for hi655x
  regulator: hi655x: enable regulator for hi655x PMIC
  arm64: dts: hisilicon: Add hi655x pmic dts node

 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
 .../regulator/hisilicon,hi655x-regulator.txt       |  28 +++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
 drivers/mfd/Kconfig                                |  10 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/hi655x-regulator.c               | 227 +++++++++++++++++++++
 include/linux/mfd/hi655x-pmic.h                    |  54 +++++
 10 files changed, 605 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
 create mode 100644 drivers/mfd/hi655x-pmic.c
 create mode 100644 drivers/regulator/hi655x-regulator.c
 create mode 100644 include/linux/mfd/hi655x-pmic.h

-- 
1.9.1

ù$

[toc] | [next] | [standalone]


#1322904

FromLee Jones <lee.jones@linaro.org>
Date2016-02-01 09:40 +0100
Message-ID<qXibE-8pb-5@gated-at.bofh.it>
In reply to#1321838
Somehow you've managed to submit this 0th patch disconnected to the
remained of the set.  This means that when someone either replies to
the other patches or this one (like now) there will be many mails
between the two.  You may even get complained at for not submitting a
cover-letter because of it.

Please test your patch-sending system (by sending to only yourself)
before submitting another set.

> The patch sets add support for Hi6220 PMIC Hi655x MFD core and its
> regulator driver.
>   Current testing and support board is Hikey which is one of 96boards.
>   It is an arm64 open source board. For more information about this board,
>   please access https://www.96boards.org.
> 
>   This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>   Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>   We can use memory-mapped I/O to communicate.
> 
>   +----------------+             +-------------+
>   |                |             |             |
>   |    Hi6220      |   SSI bus   |   Hi655x    |
>   |                |-------------|             |
>   |                |(REGMAP_MMIO)|             |
>   +----------------+             +-------------+
> 
>   V2: Code refactoring of regulator.
> 
>   V3: Drop mtcmos from this patch and use regmap-irq.
> 
>   V4: Move the vset-table to driver code and donot open code for it.
> 
>   V5: Use regulators_node and of_match, donot open code fot it.
> 
>   V7: Change the constraints into hikey.dts and fix code in PMIC.
> 
> Chen Feng (5):
>   mfd: hi655x: Add document for mfd hi665x PMIC
>   regulator: hi655x: Document for hi655x regulator
>   mfd: hi655x: Add MFD driver for hi655x
>   regulator: hi655x: enable regulator for hi655x PMIC
>   arm64: dts: hisilicon: Add hi655x pmic dts node
> 
>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
>  .../regulator/hisilicon,hi655x-regulator.txt       |  28 +++
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
>  drivers/mfd/Kconfig                                |  10 +
>  drivers/mfd/Makefile                               |   1 +
>  drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
>  drivers/regulator/Kconfig                          |   8 +
>  drivers/regulator/Makefile                         |   1 +
>  drivers/regulator/hi655x-regulator.c               | 227 +++++++++++++++++++++
>  include/linux/mfd/hi655x-pmic.h                    |  54 +++++
>  10 files changed, 605 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>  create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
>  create mode 100644 drivers/mfd/hi655x-pmic.c
>  create mode 100644 drivers/regulator/hi655x-regulator.c
>  create mode 100644 include/linux/mfd/hi655x-pmic.h
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[toc] | [prev] | [next] | [standalone]


#1322913

FromChen Feng <puck.chen@hisilicon.com>
Date2016-02-01 10:00 +0100
Message-ID<qXiv0-4W-5@gated-at.bofh.it>
In reply to#1322904

On 2016/2/1 16:35, Lee Jones wrote:
> Somehow you've managed to submit this 0th patch disconnected to the
> remained of the set.  This means that when someone either replies to
> the other patches or this one (like now) there will be many mails
> between the two.  You may even get complained at for not submitting a
> cover-letter because of it.
> 
> Please test your patch-sending system (by sending to only yourself)
> before submitting another set.
> 
OK, I will resend this. Sorry about that.
>> The patch sets add support for Hi6220 PMIC Hi655x MFD core and its
>> regulator driver.
>>   Current testing and support board is Hikey which is one of 96boards.
>>   It is an arm64 open source board. For more information about this board,
>>   please access https://www.96boards.org.
>>
>>   This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>>   Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>>   We can use memory-mapped I/O to communicate.
>>
>>   +----------------+             +-------------+
>>   |                |             |             |
>>   |    Hi6220      |   SSI bus   |   Hi655x    |
>>   |                |-------------|             |
>>   |                |(REGMAP_MMIO)|             |
>>   +----------------+             +-------------+
>>
>>   V2: Code refactoring of regulator.
>>
>>   V3: Drop mtcmos from this patch and use regmap-irq.
>>
>>   V4: Move the vset-table to driver code and donot open code for it.
>>
>>   V5: Use regulators_node and of_match, donot open code fot it.
>>
>>   V7: Change the constraints into hikey.dts and fix code in PMIC.
>>
>> Chen Feng (5):
>>   mfd: hi655x: Add document for mfd hi665x PMIC
>>   regulator: hi655x: Document for hi655x regulator
>>   mfd: hi655x: Add MFD driver for hi655x
>>   regulator: hi655x: enable regulator for hi655x PMIC
>>   arm64: dts: hisilicon: Add hi655x pmic dts node
>>
>>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
>>  .../regulator/hisilicon,hi655x-regulator.txt       |  28 +++
>>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
>>  drivers/mfd/Kconfig                                |  10 +
>>  drivers/mfd/Makefile                               |   1 +
>>  drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
>>  drivers/regulator/Kconfig                          |   8 +
>>  drivers/regulator/Makefile                         |   1 +
>>  drivers/regulator/hi655x-regulator.c               | 227 +++++++++++++++++++++
>>  include/linux/mfd/hi655x-pmic.h                    |  54 +++++
>>  10 files changed, 605 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>  create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
>>  create mode 100644 drivers/mfd/hi655x-pmic.c
>>  create mode 100644 drivers/regulator/hi655x-regulator.c
>>  create mode 100644 include/linux/mfd/hi655x-pmic.h
>>
> 

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web