Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1318568 > unrolled thread

[PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

Started byWenyou Yang <wenyou.yang@atmel.com>
First post2016-01-27 03:40 +0100
Last post2016-01-27 09:50 +0100
Articles 6 — 4 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang <wenyou.yang@atmel.com> - 2016-01-27 03:40 +0100
    Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD  driver Lee Jones <lee.jones@linaro.org> - 2016-01-27 08:30 +0100
      RE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD  driver "Yang, Wenyou" <Wenyou.Yang@atmel.com> - 2016-01-27 08:40 +0100
        Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD  driver Lee Jones <lee.jones@linaro.org> - 2016-01-27 10:30 +0100
    Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Peter Korsgaard <peter@korsgaard.com> - 2016-01-27 09:10 +0100
      RE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD  driver "Yang, Wenyou" <Wenyou.Yang@atmel.com> - 2016-01-27 09:50 +0100

#1318568 — [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

FromWenyou Yang <wenyou.yang@atmel.com>
Date2016-01-27 03:40 +0100
Subject[PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Message-ID<qVobw-53J-9@gated-at.bofh.it>
This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
 - Regulator
 - Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---

Changes in v8:
 - change the subdevice's name "act8945a-pmic" to "act8945a-regulator".

Changes in v7:
 - remove struct act8945a_dev to .c file.
 - remove unused .h file.

Changes in v6:
 - change MFD_ACT8945A type from bool to tristate.
 - revert depends on to 'I2C'.

Changes in v5:
 - change depends on to 'I2C=y'.

Changes in v4:
 - add a space before .compatible.
 - collect Reviewed-by from Krzysztof Kozlowski.

Changes in v3: None
Changes in v2:
 - add more help information in Kconfig.
 - update the file header with short version license and author line.
 - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
 - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
 - use more explicit info to indicate the failure to add sub devices.
 - remove the unnecessary print out.
 - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").

 drivers/mfd/Kconfig    |   11 +++++
 drivers/mfd/Makefile   |    1 +
 drivers/mfd/act8945a.c |  112 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+)
 create mode 100644 drivers/mfd/act8945a.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6c4ebd9..38994bb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
           necessary for using the board's GPIO and MFGPT functionality.
 
+config MFD_ACT8945A
+	tristate "Active-semi ACT8945A"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C && OF
+	help
+	  Support for the ACT8945A PMIC from Active-semi. This device
+	  features three step-down DC/DC converters and four low-dropout
+	  linear regulators, along with a complete ActivePath battery
+	  charger.
+
 config MFD_AS3711
 	bool "AMS AS3711"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
 obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..3a37611
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,112 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+struct act8945a_dev {
+	struct regmap *regmap;
+};
+
+static const struct mfd_cell act8945a_devs[] = {
+	{
+		.name = "act8945a-regulator",
+		.of_compatible = "active-semi,act8945a-regulator",
+	},
+	{
+		.name = "act8945a-charger",
+		.of_compatible = "active-semi,act8945a-charger",
+	},
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct act8945a_dev *act8945a;
+	int ret;
+
+	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
+	if (!act8945a)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, act8945a);
+
+	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+	if (IS_ERR(act8945a->regmap)) {
+		ret = PTR_ERR(act8945a->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add sub devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+	{ "act8945a", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+	{ .compatible = "active-semi,act8945a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+	.driver = {
+		   .name = "act8945a",
+		   .of_match_table = of_match_ptr(act8945a_of_match),
+	},
+	.probe = act8945a_i2c_probe,
+	.remove = act8945a_i2c_remove,
+	.id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+	return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+	i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

[toc] | [next] | [standalone]

#1318712 — Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

FromLee Jones <lee.jones@linaro.org>
Date2016-01-27 08:30 +0100
SubjectRe: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Message-ID<qVsIa-8rt-1@gated-at.bofh.it>
In reply to#1318568
On Wed, 27 Jan 2016, Wenyou Yang wrote:

> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
>  - Regulator
>  - Charger
> 
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Can I take the MFD patches in separately?

For my own reference:
  Acked-by: Lee Jones <lee.jones@linaro.org>

> ---
> 
> Changes in v8:
>  - change the subdevice's name "act8945a-pmic" to "act8945a-regulator".
> 
> Changes in v7:
>  - remove struct act8945a_dev to .c file.
>  - remove unused .h file.
> 
> Changes in v6:
>  - change MFD_ACT8945A type from bool to tristate.
>  - revert depends on to 'I2C'.
> 
> Changes in v5:
>  - change depends on to 'I2C=y'.
> 
> Changes in v4:
>  - add a space before .compatible.
>  - collect Reviewed-by from Krzysztof Kozlowski.
> 
> Changes in v3: None
> Changes in v2:
>  - add more help information in Kconfig.
>  - update the file header with short version license and author line.
>  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
>  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
>  - use more explicit info to indicate the failure to add sub devices.
>  - remove the unnecessary print out.
>  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> 
>  drivers/mfd/Kconfig    |   11 +++++
>  drivers/mfd/Makefile   |    1 +
>  drivers/mfd/act8945a.c |  112 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 124 insertions(+)
>  create mode 100644 drivers/mfd/act8945a.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 6c4ebd9..38994bb 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
>  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
>            necessary for using the board's GPIO and MFGPT functionality.
>  
> +config MFD_ACT8945A
> +	tristate "Active-semi ACT8945A"
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	depends on I2C && OF
> +	help
> +	  Support for the ACT8945A PMIC from Active-semi. This device
> +	  features three step-down DC/DC converters and four low-dropout
> +	  linear regulators, along with a complete ActivePath battery
> +	  charger.
> +
>  config MFD_AS3711
>  	bool "AMS AS3711"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
>  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
>  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
>  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
>  obj-$(CONFIG_MFD_SM501)		+= sm501.o
>  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..3a37611
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,112 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.
> + *
> + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under  the terms of the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +struct act8945a_dev {
> +	struct regmap *regmap;
> +};
> +
> +static const struct mfd_cell act8945a_devs[] = {
> +	{
> +		.name = "act8945a-regulator",
> +		.of_compatible = "active-semi,act8945a-regulator",
> +	},
> +	{
> +		.name = "act8945a-charger",
> +		.of_compatible = "active-semi,act8945a-charger",
> +	},
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *i2c,
> +			      const struct i2c_device_id *id)
> +{
> +	struct act8945a_dev *act8945a;
> +	int ret;
> +
> +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> +	if (!act8945a)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(i2c, act8945a);
> +
> +	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
> +	if (IS_ERR(act8945a->regmap)) {
> +		ret = PTR_ERR(act8945a->regmap);
> +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
> +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> +	if (ret) {
> +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> +	mfd_remove_devices(&i2c->dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> +	{ "act8945a", 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> +	{ .compatible = "active-semi,act8945a", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> +
> +static struct i2c_driver act8945a_i2c_driver = {
> +	.driver = {
> +		   .name = "act8945a",
> +		   .of_match_table = of_match_ptr(act8945a_of_match),
> +	},
> +	.probe = act8945a_i2c_probe,
> +	.remove = act8945a_i2c_remove,
> +	.id_table = act8945a_i2c_id,
> +};
> +
> +static int __init act8945a_i2c_init(void)
> +{
> +	return i2c_add_driver(&act8945a_i2c_driver);
> +}
> +subsys_initcall(act8945a_i2c_init);
> +
> +static void __exit act8945a_i2c_exit(void)
> +{
> +	i2c_del_driver(&act8945a_i2c_driver);
> +}
> +module_exit(act8945a_i2c_exit);
> +
> +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
> +MODULE_LICENSE("GPL");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[toc] | [prev] | [next] | [standalone]

#1318727 — RE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

From"Yang, Wenyou" <Wenyou.Yang@atmel.com>
Date2016-01-27 08:40 +0100
SubjectRE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Message-ID<qVsRQ-8v1-7@gated-at.bofh.it>
In reply to#1318712
Hi Lee,

> -----Original Message-----
> From: Lee Jones [mailto:lee.jones@linaro.org]
> Sent: 2016年1月27日 15:28
> To: Yang, Wenyou <Wenyou.Yang@atmel.com>
> Cc: Rob Herring <robh+dt@kernel.org>; Pawel Moll <pawel.moll@arm.com>;
> Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; Javier
> Martinez Canillas <javier@dowhile0.org>; Krzysztof Kozlowski
> <k.kozlowski@samsung.com>; Peter Korsgaard <jacmet@gmail.com>; Ferre,
> Nicolas <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
> 
> On Wed, 27 Jan 2016, Wenyou Yang wrote:
> 
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> >  - Regulator
> >  - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> Can I take the MFD patches in separately?

Yes, you can, I think.

> 
> For my own reference:
>   Acked-by: Lee Jones <lee.jones@linaro.org>

Thank you for your Acked.

> 
> > ---
> >
> > Changes in v8:
> >  - change the subdevice's name "act8945a-pmic" to "act8945a-regulator".
> >
> > Changes in v7:
> >  - remove struct act8945a_dev to .c file.
> >  - remove unused .h file.
> >
> > Changes in v6:
> >  - change MFD_ACT8945A type from bool to tristate.
> >  - revert depends on to 'I2C'.
> >
> > Changes in v5:
> >  - change depends on to 'I2C=y'.
> >
> > Changes in v4:
> >  - add a space before .compatible.
> >  - collect Reviewed-by from Krzysztof Kozlowski.
> >
> > Changes in v3: None
> > Changes in v2:
> >  - add more help information in Kconfig.
> >  - update the file header with short version license and author line.
> >  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> >  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> >  - use more explicit info to indicate the failure to add sub devices.
> >  - remove the unnecessary print out.
> >  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> >
> >  drivers/mfd/Kconfig    |   11 +++++
> >  drivers/mfd/Makefile   |    1 +
> >  drivers/mfd/act8945a.c |  112
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 124 insertions(+)
> >  create mode 100644 drivers/mfd/act8945a.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 6c4ebd9..38994bb 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,17 @@ config MFD_CS5535
> >  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
> >            necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > +	tristate "Active-semi ACT8945A"
> > +	select MFD_CORE
> > +	select REGMAP_I2C
> > +	depends on I2C && OF
> > +	help
> > +	  Support for the ACT8945A PMIC from Active-semi. This device
> > +	  features three step-down DC/DC converters and four low-dropout
> > +	  linear regulators, along with a complete ActivePath battery
> > +	  charger.
> > +
> >  config MFD_AS3711
> >  	bool "AMS AS3711"
> >  	select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> >  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
> >  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
> >  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
> >  obj-$(CONFIG_MFD_SM501)		+= sm501.o
> >  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
> >  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..3a37611
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,112 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
> > + *
> > + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under  the terms of the GNU General  Public License as published
> > +by the
> > + * Free Software Foundation;  either version 2 of the License, or (at
> > +your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +struct act8945a_dev {
> > +	struct regmap *regmap;
> > +};
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > +	{
> > +		.name = "act8945a-regulator",
> > +		.of_compatible = "active-semi,act8945a-regulator",
> > +	},
> > +	{
> > +		.name = "act8945a-charger",
> > +		.of_compatible = "active-semi,act8945a-charger",
> > +	},
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > +	.reg_bits = 8,
> > +	.val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > +			      const struct i2c_device_id *id) {
> > +	struct act8945a_dev *act8945a;
> > +	int ret;
> > +
> > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > +	if (!act8945a)
> > +		return -ENOMEM;
> > +
> > +	i2c_set_clientdata(i2c, act8945a);
> > +
> > +	act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
> > +	if (IS_ERR(act8945a->regmap)) {
> > +		ret = PTR_ERR(act8945a->regmap);
> > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
> > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > +	if (ret) {
> > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > +	mfd_remove_devices(&i2c->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > +	{ "act8945a", 0 },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > +	{ .compatible = "active-semi,act8945a", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> > +
> > +static struct i2c_driver act8945a_i2c_driver = {
> > +	.driver = {
> > +		   .name = "act8945a",
> > +		   .of_match_table = of_match_ptr(act8945a_of_match),
> > +	},
> > +	.probe = act8945a_i2c_probe,
> > +	.remove = act8945a_i2c_remove,
> > +	.id_table = act8945a_i2c_id,
> > +};
> > +
> > +static int __init act8945a_i2c_init(void) {
> > +	return i2c_add_driver(&act8945a_i2c_driver);
> > +}
> > +subsys_initcall(act8945a_i2c_init);
> > +
> > +static void __exit act8945a_i2c_exit(void) {
> > +	i2c_del_driver(&act8945a_i2c_driver);
> > +}
> > +module_exit(act8945a_i2c_exit);
> > +
> > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
> > +MODULE_LICENSE("GPL");
> 
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source
> software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog

Best Regards,
Wenyou Yang

[toc] | [prev] | [next] | [standalone]

#1318783 — Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

FromLee Jones <lee.jones@linaro.org>
Date2016-01-27 10:30 +0100
SubjectRe: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Message-ID<qVuAj-1nh-29@gated-at.bofh.it>
In reply to#1318727
On Wed, 27 Jan 2016, Yang, Wenyou wrote:

> Hi Lee,
> 
> > -----Original Message-----
> > From: Lee Jones [mailto:lee.jones@linaro.org]
> > Sent: 2016年1月27日 15:28
> > To: Yang, Wenyou <Wenyou.Yang@atmel.com>
> > Cc: Rob Herring <robh+dt@kernel.org>; Pawel Moll <pawel.moll@arm.com>;
> > Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> > <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; Javier
> > Martinez Canillas <javier@dowhile0.org>; Krzysztof Kozlowski
> > <k.kozlowski@samsung.com>; Peter Korsgaard <jacmet@gmail.com>; Ferre,
> > Nicolas <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org;
> > linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> > Subject: Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> > MFD driver
> > 
> > On Wed, 27 Jan 2016, Wenyou Yang wrote:
> > 
> > > This patch adds support for the Active-semi ACT8945A PMIC.
> > > It is a Multi Function Device with the following subdevices:
> > >  - Regulator
> > >  - Charger
> > >
> > > It is interfaced to the host controller using I2C interface, ACT8945A
> > > is a child device of the I2C.
> > >
> > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > 
> > Can I take the MFD patches in separately?
> 
> Yes, you can, I think.
> 
> > 
> > For my own reference:
> >   Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> Thank you for your Acked.

Please re-submit with the changes Peter suggested and I'll apply.

> > > ---
> > >
> > > Changes in v8:
> > >  - change the subdevice's name "act8945a-pmic" to "act8945a-regulator".
> > >
> > > Changes in v7:
> > >  - remove struct act8945a_dev to .c file.
> > >  - remove unused .h file.
> > >
> > > Changes in v6:
> > >  - change MFD_ACT8945A type from bool to tristate.
> > >  - revert depends on to 'I2C'.
> > >
> > > Changes in v5:
> > >  - change depends on to 'I2C=y'.
> > >
> > > Changes in v4:
> > >  - add a space before .compatible.
> > >  - collect Reviewed-by from Krzysztof Kozlowski.
> > >
> > > Changes in v3: None
> > > Changes in v2:
> > >  - add more help information in Kconfig.
> > >  - update the file header with short version license and author line.
> > >  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> > >  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> > >  - use more explicit info to indicate the failure to add sub devices.
> > >  - remove the unnecessary print out.
> > >  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> > >
> > >  drivers/mfd/Kconfig    |   11 +++++
> > >  drivers/mfd/Makefile   |    1 +
> > >  drivers/mfd/act8945a.c |  112
> > > ++++++++++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 124 insertions(+)
> > >  create mode 100644 drivers/mfd/act8945a.c
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > > 6c4ebd9..38994bb 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -18,6 +18,17 @@ config MFD_CS5535
> > >  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
> > >            necessary for using the board's GPIO and MFGPT functionality.
> > >
> > > +config MFD_ACT8945A
> > > +	tristate "Active-semi ACT8945A"
> > > +	select MFD_CORE
> > > +	select REGMAP_I2C
> > > +	depends on I2C && OF
> > > +	help
> > > +	  Support for the ACT8945A PMIC from Active-semi. This device
> > > +	  features three step-down DC/DC converters and four low-dropout
> > > +	  linear regulators, along with a complete ActivePath battery
> > > +	  charger.
> > > +
> > >  config MFD_AS3711
> > >  	bool "AMS AS3711"
> > >  	select MFD_CORE
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > > 0f230a6..2f1ca82 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -6,6 +6,7 @@
> > >  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
> > >  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
> > >  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> > > +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
> > >  obj-$(CONFIG_MFD_SM501)		+= sm501.o
> > >  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
> > >  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> > > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > > mode 100644 index 0000000..3a37611
> > > --- /dev/null
> > > +++ b/drivers/mfd/act8945a.c
> > > @@ -0,0 +1,112 @@
> > > +/*
> > > + * MFD driver for Active-semi ACT8945a PMIC
> > > + *
> > > + * Copyright (C) 2015 Atmel Corporation.
> > > + *
> > > + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > +modify it
> > > + * under  the terms of the GNU General  Public License as published
> > > +by the
> > > + * Free Software Foundation;  either version 2 of the License, or (at
> > > +your
> > > + * option) any later version.
> > > + */
> > > +
> > > +#include <linux/i2c.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +struct act8945a_dev {
> > > +	struct regmap *regmap;
> > > +};
> > > +
> > > +static const struct mfd_cell act8945a_devs[] = {
> > > +	{
> > > +		.name = "act8945a-regulator",
> > > +		.of_compatible = "active-semi,act8945a-regulator",
> > > +	},
> > > +	{
> > > +		.name = "act8945a-charger",
> > > +		.of_compatible = "active-semi,act8945a-charger",
> > > +	},
> > > +};
> > > +
> > > +static const struct regmap_config act8945a_regmap_config = {
> > > +	.reg_bits = 8,
> > > +	.val_bits = 8,
> > > +};
> > > +
> > > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > > +			      const struct i2c_device_id *id) {
> > > +	struct act8945a_dev *act8945a;
> > > +	int ret;
> > > +
> > > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > > +	if (!act8945a)
> > > +		return -ENOMEM;
> > > +
> > > +	i2c_set_clientdata(i2c, act8945a);
> > > +
> > > +	act8945a->regmap = devm_regmap_init_i2c(i2c,
> > &act8945a_regmap_config);
> > > +	if (IS_ERR(act8945a->regmap)) {
> > > +		ret = PTR_ERR(act8945a->regmap);
> > > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> > act8945a_devs,
> > > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > > +	if (ret) {
> > > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> > > +		return ret;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > > +	mfd_remove_devices(&i2c->dev);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > > +	{ "act8945a", 0 },
> > > +	{}
> > > +};
> > > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > > +
> > > +static const struct of_device_id act8945a_of_match[] = {
> > > +	{ .compatible = "active-semi,act8945a", },
> > > +	{},
> > > +};
> > > +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> > > +
> > > +static struct i2c_driver act8945a_i2c_driver = {
> > > +	.driver = {
> > > +		   .name = "act8945a",
> > > +		   .of_match_table = of_match_ptr(act8945a_of_match),
> > > +	},
> > > +	.probe = act8945a_i2c_probe,
> > > +	.remove = act8945a_i2c_remove,
> > > +	.id_table = act8945a_i2c_id,
> > > +};
> > > +
> > > +static int __init act8945a_i2c_init(void) {
> > > +	return i2c_add_driver(&act8945a_i2c_driver);
> > > +}
> > > +subsys_initcall(act8945a_i2c_init);
> > > +
> > > +static void __exit act8945a_i2c_exit(void) {
> > > +	i2c_del_driver(&act8945a_i2c_driver);
> > > +}
> > > +module_exit(act8945a_i2c_exit);
> > > +
> > > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> > > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
> > > +MODULE_LICENSE("GPL");
> > 
> 
> Best Regards,
> Wenyou Yang

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[toc] | [prev] | [next] | [standalone]

#1318743

FromPeter Korsgaard <peter@korsgaard.com>
Date2016-01-27 09:10 +0100
Message-ID<qVtkS-wF-21@gated-at.bofh.it>
In reply to#1318568
>>>>> "Wenyou" == Wenyou Yang <wenyou.yang@atmel.com> writes:

 > This patch adds support for the Active-semi ACT8945A PMIC.
 > It is a Multi Function Device with the following subdevices:
 >  - Regulator
 >  - Charger

 > It is interfaced to the host controller using I2C interface,
 > ACT8945A is a child device of the I2C.

 > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
 > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Thanks, looks good - One more thing though:

 > +
 > +struct act8945a_dev {
 > +	struct regmap *regmap;
 > +};

You don't need this structure as you used devm. With that removed (and
the logic to devm_kzalloc it) you can add my:

Acked-by: Peter Korsgaard <peter@korsgaard.com>


 > +static const struct mfd_cell act8945a_devs[] = {
 > +	{
 > +		.name = "act8945a-regulator",
 > +		.of_compatible = "active-semi,act8945a-regulator",
 > +	},
 > +	{
 > +		.name = "act8945a-charger",
 > +		.of_compatible = "active-semi,act8945a-charger",
 > +	},
 > +};
 > +
 > +static const struct regmap_config act8945a_regmap_config = {
 > +	.reg_bits = 8,
 > +	.val_bits = 8,
 > +};
 > +
 > +static int act8945a_i2c_probe(struct i2c_client *i2c,
 > +			      const struct i2c_device_id *id)
 > +{
 > +	struct act8945a_dev *act8945a;
 > +	int ret;
 > +
 > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
 > +	if (!act8945a)
 > +		return -ENOMEM;
 > +
 > +	i2c_set_clientdata(i2c, act8945a);
 > +
 > +	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
 > +	if (IS_ERR(act8945a->regmap)) {
 > +		ret = PTR_ERR(act8945a->regmap);
 > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
 > +		return ret;
 > +	}
 > +
 > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
 > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
 > +	if (ret) {
 > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
 > +		return ret;
 > +	}
 > +
 > +	return 0;
 > +}
 > +
 > +static int act8945a_i2c_remove(struct i2c_client *i2c)
 > +{
 > +	mfd_remove_devices(&i2c->dev);
 > +
 > +	return 0;
 > +}
 > +
 > +static const struct i2c_device_id act8945a_i2c_id[] = {
 > +	{ "act8945a", 0 },
 > +	{}
 > +};
 > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
 > +
 > +static const struct of_device_id act8945a_of_match[] = {
 > +	{ .compatible = "active-semi,act8945a", },
 > +	{},
 > +};
 > +MODULE_DEVICE_TABLE(of, act8945a_of_match);
 > +
 > +static struct i2c_driver act8945a_i2c_driver = {
 > +	.driver = {
 > +		   .name = "act8945a",
 > +		   .of_match_table = of_match_ptr(act8945a_of_match),
 > +	},
 > +	.probe = act8945a_i2c_probe,
 > +	.remove = act8945a_i2c_remove,
 > +	.id_table = act8945a_i2c_id,
 > +};
 > +
 > +static int __init act8945a_i2c_init(void)
 > +{
 > +	return i2c_add_driver(&act8945a_i2c_driver);
 > +}
 > +subsys_initcall(act8945a_i2c_init);
 > +
 > +static void __exit act8945a_i2c_exit(void)
 > +{
 > +	i2c_del_driver(&act8945a_i2c_driver);
 > +}
 > +module_exit(act8945a_i2c_exit);
 > +
 > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
 > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
 > +MODULE_LICENSE("GPL");
 > -- 
 > 1.7.9.5



-- 
Bye, Peter Korsgaard

[toc] | [prev] | [next] | [standalone]

#1318752 — RE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

From"Yang, Wenyou" <Wenyou.Yang@atmel.com>
Date2016-01-27 09:50 +0100
SubjectRE: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Message-ID<qVtXz-Pn-5@gated-at.bofh.it>
In reply to#1318743
Hi Peter,

> -----Original Message-----
> From: Peter Korsgaard [mailto:jacmet@gmail.com] On Behalf Of Peter Korsgaard
> Sent: 2016年1月27日 16:05
> To: Yang, Wenyou <Wenyou.Yang@atmel.com>
> Cc: Lee Jones <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>;
> Pawel Moll <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian
> Campbell <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>;
> Javier Martinez Canillas <javier@dowhile0.org>; Krzysztof Kozlowski
> <k.kozlowski@samsung.com>; Peter Korsgaard <jacmet@gmail.com>; Ferre,
> Nicolas <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v8 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
> 
> >>>>> "Wenyou" == Wenyou Yang <wenyou.yang@atmel.com> writes:
> 
>  > This patch adds support for the Active-semi ACT8945A PMIC.
>  > It is a Multi Function Device with the following subdevices:
>  >  - Regulator
>  >  - Charger
> 
>  > It is interfaced to the host controller using I2C interface,  > ACT8945A is a child
> device of the I2C.
> 
>  > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>  > Reviewed-by:
> Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> Thanks, looks good - One more thing though:
> 
>  > +
>  > +struct act8945a_dev {
>  > +	struct regmap *regmap;
>  > +};
> 
> You don't need this structure as you used devm. With that removed (and the logic
> to devm_kzalloc it) you can add my:

Yes, it can be removed.

> 
> Acked-by: Peter Korsgaard <peter@korsgaard.com>
> 

Thank you for you Acked.

> 
>  > +static const struct mfd_cell act8945a_devs[] = {
>  > +	{
>  > +		.name = "act8945a-regulator",
>  > +		.of_compatible = "active-semi,act8945a-regulator",
>  > +	},
>  > +	{
>  > +		.name = "act8945a-charger",
>  > +		.of_compatible = "active-semi,act8945a-charger",
>  > +	},
>  > +};
>  > +
>  > +static const struct regmap_config act8945a_regmap_config = {
>  > +	.reg_bits = 8,
>  > +	.val_bits = 8,
>  > +};
>  > +
>  > +static int act8945a_i2c_probe(struct i2c_client *i2c,
>  > +			      const struct i2c_device_id *id)
>  > +{
>  > +	struct act8945a_dev *act8945a;
>  > +	int ret;
>  > +
>  > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
>  > +	if (!act8945a)
>  > +		return -ENOMEM;
>  > +
>  > +	i2c_set_clientdata(i2c, act8945a);
>  > +
>  > +	act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
>  > +	if (IS_ERR(act8945a->regmap)) {
>  > +		ret = PTR_ERR(act8945a->regmap);
>  > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
>  > +		return ret;
>  > +	}
>  > +
>  > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
>  > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
>  > +	if (ret) {
>  > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
>  > +		return ret;
>  > +	}
>  > +
>  > +	return 0;
>  > +}
>  > +
>  > +static int act8945a_i2c_remove(struct i2c_client *i2c)  > +{
>  > +	mfd_remove_devices(&i2c->dev);
>  > +
>  > +	return 0;
>  > +}
>  > +
>  > +static const struct i2c_device_id act8945a_i2c_id[] = {
>  > +	{ "act8945a", 0 },
>  > +	{}
>  > +};
>  > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);  > +  > +static const struct
> of_device_id act8945a_of_match[] = {
>  > +	{ .compatible = "active-semi,act8945a", },
>  > +	{},
>  > +};
>  > +MODULE_DEVICE_TABLE(of, act8945a_of_match);  > +  > +static struct
> i2c_driver act8945a_i2c_driver = {
>  > +	.driver = {
>  > +		   .name = "act8945a",
>  > +		   .of_match_table = of_match_ptr(act8945a_of_match),
>  > +	},
>  > +	.probe = act8945a_i2c_probe,
>  > +	.remove = act8945a_i2c_remove,
>  > +	.id_table = act8945a_i2c_id,
>  > +};
>  > +
>  > +static int __init act8945a_i2c_init(void)  > +{
>  > +	return i2c_add_driver(&act8945a_i2c_driver);
>  > +}
>  > +subsys_initcall(act8945a_i2c_init);
>  > +
>  > +static void __exit act8945a_i2c_exit(void)  > +{
>  > +	i2c_del_driver(&act8945a_i2c_driver);
>  > +}
>  > +module_exit(act8945a_i2c_exit);
>  > +
>  > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");  >
> +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");  >
> +MODULE_LICENSE("GPL");  > --  > 1.7.9.5
> 
> 
> 
> --
> Bye, Peter Korsgaard


Best regards,
Wenyou Yang

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web