Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1319455 > unrolled thread
| Started by | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| First post | 2016-01-27 20:30 +0100 |
| Last post | 2016-01-28 03:10 +0100 |
| Articles | 20 on this page of 56 — 4 participants |
Back to article view | Back to linux.kernel
[PATCH 3.14 00/59] 3.14.60-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 18/59] ALSA: timer: Fix double unlink of active_list Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 42/59] ipv6: update skb->csum when CE mark is propagated Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 45/59] team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 05/59] x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[] Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 08/59] ALSA: hda - Add Intel Lewisburg device IDs Audio Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 22/59] ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 02/59] xen/gntdev: Grant maps should not be subject to NUMA balancing Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 03/59] x86/xen: dont reset vcpu_info on a cancelled suspend Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 27/59] usb: xhci: fix config fail of FS hub behind a HS hub with MTT Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 26/59] ASoC: compress: Fix compress device direction check Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 24/59] ASoC: wm8974: set cache type for regmap Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 40/59] bonding: Prevent IPv6 link local address on enslaved devices Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 21/59] ALSA: hrtimer: Fix stall by hrtimer_cancel() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 07/59] ipmi: move timer init to before irq is setup Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 41/59] phonet: properly unshare skbs in phonet_rcv() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 04/59] KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 20/59] ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 28/59] USB: ipaq.c: fix a timeout loop Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 30/59] xhci: refuse loading if nousb is used Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used Luis Henriques <luis.henriques@canonical.com> - 2016-01-28 19:00 +0100
Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-31 20:20 +0100
Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used Luis Henriques <luis.henriques@canonical.com> - 2016-02-02 18:40 +0100
[PATCH 3.14 52/59] arm64: fix building without CONFIG_UID16 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 19/59] ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 09/59] ALSA: hda - Apply pin fixup for HP ProBook 6550b Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 53/59] arm64: Clear out any singlestep state on a ptrace detach operation Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 49/59] powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 43/59] isdn_ppp: Add checks for allocation failure in isdn_ppp_open() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 39/59] tcp_yeah: dont set ssthresh below 2 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 46/59] powerpc/tm: Block signal return setting invalid MSR state Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 06/59] x86/boot: Double BOOT_HEAP_SIZE to 64KB Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 51/59] arm64: KVM: Fix AArch32 to AArch64 register mapping Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:30 +0100
[PATCH 3.14 11/59] ALSA: hda - Add inverted dmic for Packard Bell DOTS Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 14/59] ALSA: seq: Fix missing NULL check at remove_events ioctl Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 23/59] ASoC: wm8962: correct addresses for HPF_C_0/1 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 16/59] ALSA: timer: Harden slave timer list handling Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 17/59] ALSA: timer: Fix race among timer ioctls Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 25/59] ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 10/59] ALSA: rme96: Fix unexpected volume reset after rate changes Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 13/59] ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2) Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 01/59] x86/signal: Fix restart_syscall number for x32 tasks Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 12/59] ALSA: hda - Set SKL+ hda controller power at freeze() and thaw() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 15/59] ALSA: seq: Fix race at timer setup and close Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 20:40 +0100
[PATCH 3.14 32/59] ipv6/addrlabel: fix ip6addrlbl_get() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:00 +0100
[PATCH 3.14 59/59] arm64: restore bogomips information in /proc/cpuinfo Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:00 +0100
[PATCH 3.14 38/59] net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:00 +0100
[PATCH 3.14 29/59] USB: cp210x: add ID for ELV Marble Sound Board 1 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 35/59] unix: properly account for FDs passed over unix sockets Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 34/59] connector: bump skb->users before callback invocation Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 36/59] bridge: Only call /sbin/bridge-stp for the initial network namespace Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 58/59] mn10300: Select CONFIG_HAVE_UID16 to fix build failure Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 37/59] net: possible use after free in dst_release Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
[PATCH 3.14 33/59] sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-01-27 21:10 +0100
Re: [PATCH 3.14 00/59] 3.14.60-stable review Shuah Khan <shuahkh@osg.samsung.com> - 2016-01-28 00:30 +0100
Re: [PATCH 3.14 00/59] 3.14.60-stable review Guenter Roeck <linux@roeck-us.net> - 2016-01-28 03:10 +0100
Page 2 of 3 — ← Prev page 1 [2] 3 Next page →
| From | Luis Henriques <luis.henriques@canonical.com> |
|---|---|
| Date | 2016-01-28 19:00 +0100 |
| Subject | Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used |
| Message-ID | <qVZ1o-6V6-7@gated-at.bofh.it> |
| In reply to | #1319476 |
On Wed, Jan 27, 2016 at 10:15:18AM -0800, Greg Kroah-Hartman wrote:
> 3.14-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Oliver Neukum <oneukum@suse.com>
>
> commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream.
>
> The module should fail to load.
>
> Signed-off-by: Oliver Neukum <oneukum@suse.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> drivers/usb/host/xhci.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4893,6 +4893,10 @@ static int __init xhci_hcd_init(void)
> BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
> /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
> BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
> +
> + if (usb_disabled())
> + return -ENODEV;
> +
I believe the error path should actually call xhci_unregister_pci().
Something like the patch below. The same is applies to the 3.10
kernel.
Cheers,
--
Luís
> return 0;
> unreg_pci:
> xhci_unregister_pci();
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
From 870b9e9479b67df493e2ca3c763102b10d4dd9da Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.com>
Date: Thu, 3 Dec 2015 15:03:34 +0100
Subject: xhci: refuse loading if nousb is used
commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream.
The module should fail to load.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: need to call xhci_unregister_pci() in the error path ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/usb/host/xhci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 20209e870a99..4c78dc564b3a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4955,6 +4955,12 @@ static int __init xhci_hcd_init(void)
BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
+ if (usb_disabled()) {
+ retval = -ENODEV;
+ goto unreg_pci;
+ }
+
return 0;
unreg_pci:
xhci_unregister_pci();
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-31 20:20 +0100 |
| Subject | Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used |
| Message-ID | <qX5Hs-7SQ-13@gated-at.bofh.it> |
| In reply to | #1320925 |
On Thu, Jan 28, 2016 at 05:57:35PM +0000, Luis Henriques wrote:
> On Wed, Jan 27, 2016 at 10:15:18AM -0800, Greg Kroah-Hartman wrote:
> > 3.14-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Oliver Neukum <oneukum@suse.com>
> >
> > commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream.
> >
> > The module should fail to load.
> >
> > Signed-off-by: Oliver Neukum <oneukum@suse.com>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > ---
> > drivers/usb/host/xhci.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -4893,6 +4893,10 @@ static int __init xhci_hcd_init(void)
> > BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
> > /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
> > BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
> > +
> > + if (usb_disabled())
> > + return -ENODEV;
> > +
>
> I believe the error path should actually call xhci_unregister_pci().
> Something like the patch below. The same is applies to the 3.10
> kernel.
>
> Cheers,
> --
> Luís
>
> > return 0;
> > unreg_pci:
> > xhci_unregister_pci();
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe stable" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> >From 870b9e9479b67df493e2ca3c763102b10d4dd9da Mon Sep 17 00:00:00 2001
> From: Oliver Neukum <oneukum@suse.com>
> Date: Thu, 3 Dec 2015 15:03:34 +0100
> Subject: xhci: refuse loading if nousb is used
>
> commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream.
>
> The module should fail to load.
>
> Signed-off-by: Oliver Neukum <oneukum@suse.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> [ luis: need to call xhci_unregister_pci() in the error path ]
> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
> ---
> drivers/usb/host/xhci.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 20209e870a99..4c78dc564b3a 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4955,6 +4955,12 @@ static int __init xhci_hcd_init(void)
> BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
> /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
> BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
> +
> + if (usb_disabled()) {
> + retval = -ENODEV;
> + goto unreg_pci;
> + }
No, we should move the check much higher up to the top of the function,
which makes it simpler. I'll go do that instead, thanks.
greg k-h
[toc] | [prev] | [next] | [standalone]
| From | Luis Henriques <luis.henriques@canonical.com> |
|---|---|
| Date | 2016-02-02 18:40 +0100 |
| Subject | Re: [PATCH 3.14 30/59] xhci: refuse loading if nousb is used |
| Message-ID | <qXN5N-6qA-37@gated-at.bofh.it> |
| In reply to | #1322717 |
On Sun, Jan 31, 2016 at 11:10:14AM -0800, Greg Kroah-Hartman wrote: > > No, we should move the check much higher up to the top of the function, > which makes it simpler. I'll go do that instead, thanks. > Ok, that makes sense. I'll use a similar solution for the 3.16 kernel backport. Thanks. Cheers, -- Luís
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 52/59] arm64: fix building without CONFIG_UID16 |
| Message-ID | <qVDWY-8oV-53@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
commit fbc416ff86183e2203cdf975e2881d7c164b0271 upstream.
As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16
disabled currently fails because the system call table still needs to
reference the individual function entry points that are provided by
kernel/sys_ni.c in this case, and the declarations are hidden inside
of #ifdef CONFIG_UID16:
arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function)
__SYSCALL(__NR_lchown, sys_lchown16)
I believe this problem only exists on ARM64, because older architectures
tend to not need declarations when their system call table is built
in assembly code, while newer architectures tend to not need UID16
support. ARM64 only uses these system calls for compatibility with
32-bit ARM binaries.
This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is
set unconditionally on ARM64 with CONFIG_COMPAT, so we see the
declarations whenever we need them, but otherwise the behavior is
unchanged.
Fixes: af1839eb4bd4 ("Kconfig: clean up the long arch list for the UID16 config option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/syscalls.h | 2 +-
include/linux/types.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -507,7 +507,7 @@ asmlinkage long sys_chown(const char __u
asmlinkage long sys_lchown(const char __user *filename,
uid_t user, gid_t group);
asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
-#ifdef CONFIG_UID16
+#ifdef CONFIG_HAVE_UID16
asmlinkage long sys_chown16(const char __user *filename,
old_uid_t user, old_gid_t group);
asmlinkage long sys_lchown16(const char __user *filename,
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -35,7 +35,7 @@ typedef __kernel_gid16_t gid16_t;
typedef unsigned long uintptr_t;
-#ifdef CONFIG_UID16
+#ifdef CONFIG_HAVE_UID16
/* This is defined by include/asm-{arch}/posix_types.h */
typedef __kernel_old_uid_t old_uid_t;
typedef __kernel_old_gid_t old_gid_t;
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 19/59] ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode |
| Message-ID | <qVDWY-8oV-57@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Boichat <drinkcat@chromium.org>
commit 9586495dc3011a80602329094e746dbce16cb1f1 upstream.
This reverts one hunk of
commit ef44a1ec6eee ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.
In this case, we are copying from a struct snd_seq_port_info32 to a
struct snd_seq_port_info, but the latter is 4 bytes longer than the
32-bit version, so we need to separate kmalloc and copy calls.
Fixes: ef44a1ec6eee ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/seq/seq_compat.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/sound/core/seq/seq_compat.c
+++ b/sound/core/seq/seq_compat.c
@@ -49,11 +49,12 @@ static int snd_seq_call_port_info_ioctl(
struct snd_seq_port_info *data;
mm_segment_t fs;
- data = memdup_user(data32, sizeof(*data32));
- if (IS_ERR(data))
- return PTR_ERR(data);
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
- if (get_user(data->flags, &data32->flags) ||
+ if (copy_from_user(data, data32, sizeof(*data32)) ||
+ get_user(data->flags, &data32->flags) ||
get_user(data->time_queue, &data32->time_queue))
goto error;
data->kernel = NULL;
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 09/59] ALSA: hda - Apply pin fixup for HP ProBook 6550b |
| Message-ID | <qVDWY-8oV-59@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit c932b98c1e47312822d911c1bb76e81ef50e389c upstream.
HP ProBook 6550b needs the same pin fixup applied to other HP B-series
laptops with docks for making its headphone and dock headphone jacks
working properly. We just need to add the codec SSID to the list.
Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=191971
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_sigmatel.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -723,6 +723,7 @@ static bool hp_bnb2011_with_dock(struct
static bool hp_blike_system(u32 subsystem_id)
{
switch (subsystem_id) {
+ case 0x103c1473: /* HP ProBook 6550b */
case 0x103c1520:
case 0x103c1521:
case 0x103c1523:
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 53/59] arm64: Clear out any singlestep state on a ptrace detach operation |
| Message-ID | <qVDWY-8oV-61@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Blackwood <john.blackwood@ccur.com>
commit 5db4fd8c52810bd9740c1240ebf89223b171aa70 upstream.
Make sure to clear out any ptrace singlestep state when a ptrace(2)
PTRACE_DETACH call is made on arm64 systems.
Otherwise, the previously ptraced task will die off with a SIGTRAP
signal if the debugger just previously singlestepped the ptraced task.
Signed-off-by: John Blackwood <john.blackwood@ccur.com>
[will: added comment to justify why this is in the arch code]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kernel/ptrace.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -51,6 +51,12 @@
*/
void ptrace_disable(struct task_struct *child)
{
+ /*
+ * This would be better off in core code, but PTRACE_DETACH has
+ * grown its fair share of arch-specific worts and changing it
+ * is likely to cause regressions on obscure architectures.
+ */
+ user_disable_single_step(child);
}
#ifdef CONFIG_HAVE_HW_BREAKPOINT
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 49/59] powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered |
| Message-ID | <qVDWY-8oV-65@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boqun Feng <boqun.feng@gmail.com>
commit 81d7a3294de7e9828310bbf986a67246b13fa01e upstream.
According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.
So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f85517 ("powerpc: Fix atomic_xxx_return barrier semantics")
This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/cmpxchg.h | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/powerpc/include/asm/cmpxchg.h
+++ b/arch/powerpc/include/asm/cmpxchg.h
@@ -18,12 +18,12 @@ __xchg_u32(volatile void *p, unsigned lo
unsigned long prev;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 \n"
PPC405_ERR77(0,%2)
" stwcx. %3,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
: "r" (p), "r" (val)
: "cc", "memory");
@@ -61,12 +61,12 @@ __xchg_u64(volatile void *p, unsigned lo
unsigned long prev;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 \n"
PPC405_ERR77(0,%2)
" stdcx. %3,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
: "r" (p), "r" (val)
: "cc", "memory");
@@ -152,14 +152,14 @@ __cmpxchg_u32(volatile unsigned int *p,
unsigned int prev;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # __cmpxchg_u32\n\
cmpw 0,%0,%3\n\
bne- 2f\n"
PPC405_ERR77(0,%2)
" stwcx. %4,0,%2\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:"
: "=&r" (prev), "+m" (*p)
@@ -198,13 +198,13 @@ __cmpxchg_u64(volatile unsigned long *p,
unsigned long prev;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # __cmpxchg_u64\n\
cmpd 0,%0,%3\n\
bne- 2f\n\
stdcx. %4,0,%2\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:"
: "=&r" (prev), "+m" (*p)
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 43/59] isdn_ppp: Add checks for allocation failure in isdn_ppp_open() |
| Message-ID | <qVDWY-8oV-63@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <ben@decadent.org.uk>
[ Upstream commit 0baa57d8dc32db78369d8b5176ef56c5e2e18ab3 ]
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/isdn/i4l/isdn_ppp.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -301,6 +301,8 @@ isdn_ppp_open(int min, struct file *file
is->compflags = 0;
is->reset = isdn_ppp_ccp_reset_alloc(is);
+ if (!is->reset)
+ return -ENOMEM;
is->lp = NULL;
is->mp_seqno = 0; /* MP sequence number */
@@ -320,6 +322,10 @@ isdn_ppp_open(int min, struct file *file
* VJ header compression init
*/
is->slcomp = slhc_init(16, 16); /* not necessary for 2. link in bundle */
+ if (!is->slcomp) {
+ isdn_ppp_ccp_reset_free(is);
+ return -ENOMEM;
+ }
#endif
#ifdef CONFIG_IPPP_FILTER
is->pass_filter = NULL;
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 39/59] tcp_yeah: dont set ssthresh below 2 |
| Message-ID | <qVDWY-8oV-67@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neal Cardwell <ncardwell@google.com>
[ Upstream commit 83d15e70c4d8909d722c0d64747d8fb42e38a48f ]
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno
and CUBIC, per RFC 5681 (equation 4).
tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh
value if the intended reduction is as big or bigger than the current
cwnd. Congestion control modules should never return a zero or
negative ssthresh. A zero ssthresh generally results in a zero cwnd,
causing the connection to stall. A negative ssthresh value will be
interpreted as a u32 and will set a target cwnd for PRR near 4
billion.
Oleksandr Natalenko reported that a system using tcp_yeah with ECN
could see a warning about a prior_cwnd of 0 in
tcp_cwnd_reduction(). Testing verified that this was due to
tcp_yeah_ssthresh() misbehaving in this way.
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_yeah.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/tcp_yeah.c
+++ b/net/ipv4/tcp_yeah.c
@@ -223,7 +223,7 @@ static u32 tcp_yeah_ssthresh(struct sock
yeah->fast_count = 0;
yeah->reno_count = max(yeah->reno_count>>1, 2U);
- return tp->snd_cwnd - reduction;
+ return max_t(int, tp->snd_cwnd - reduction, 2);
}
static struct tcp_congestion_ops tcp_yeah __read_mostly = {
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 46/59] powerpc/tm: Block signal return setting invalid MSR state |
| Message-ID | <qVDWZ-8oV-71@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling <mikey@neuling.org>
commit d2b9d2a5ad5ef04ff978c9923d19730cb05efd55 upstream.
Currently we allow both the MSR T and S bits to be set by userspace on
a signal return. Unfortunately this is a reserved configuration and
will cause a TM Bad Thing exception if attempted (via rfid).
This patch checks for this case in both the 32 and 64 bit signals
code. If both T and S are set, we mark the context as invalid.
Found using a syscall fuzzer.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kernel/signal_32.c | 14 +++++++++-----
arch/powerpc/kernel/signal_64.c | 4 ++++
3 files changed, 14 insertions(+), 5 deletions(-)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -108,6 +108,7 @@
#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */
#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */
#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
+#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -876,6 +876,15 @@ static long restore_tm_user_regs(struct
return 1;
#endif /* CONFIG_SPE */
+ /* Get the top half of the MSR from the user context */
+ if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
+ return 1;
+ msr_hi <<= 32;
+ /* If TM bits are set to the reserved value, it's an invalid context */
+ if (MSR_TM_RESV(msr_hi))
+ return 1;
+ /* Pull in the MSR TM bits from the user context */
+ regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK);
/* Now, recheckpoint. This loads up all of the checkpointed (older)
* registers, including FP and V[S]Rs. After recheckpointing, the
* transactional versions should be loaded.
@@ -885,11 +894,6 @@ static long restore_tm_user_regs(struct
current->thread.tm_texasr |= TEXASR_FS;
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(¤t->thread, msr);
- /* Get the top half of the MSR */
- if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
- return 1;
- /* Pull in MSR TM from user context */
- regs->msr = (regs->msr & ~MSR_TS_MASK) | ((msr_hi<<32) & MSR_TS_MASK);
/* This loads the speculative FP/VEC state, if used */
if (msr & MSR_FP) {
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -428,6 +428,10 @@ static long restore_tm_sigcontexts(struc
/* get MSR separately, transfer the LE bit if doing signal return */
err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+ /* Don't allow reserved mode. */
+ if (MSR_TM_RESV(msr))
+ return -EINVAL;
+
/* pull in MSR TM from user context */
regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 06/59] x86/boot: Double BOOT_HEAP_SIZE to 64KB |
| Message-ID | <qVDWZ-8oV-73@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: "H.J. Lu" <hjl.tools@gmail.com> commit 8c31902cffc4d716450be549c66a67a8a3dd479c upstream. When decompressing kernel image during x86 bootup, malloc memory for ELF program headers may run out of heap space, which leads to system halt. This patch doubles BOOT_HEAP_SIZE to 64KB. Tested with 32-bit kernel which failed to boot without this patch. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/include/asm/boot.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -27,7 +27,7 @@ #define BOOT_HEAP_SIZE 0x400000 #else /* !CONFIG_KERNEL_BZIP2 */ -#define BOOT_HEAP_SIZE 0x8000 +#define BOOT_HEAP_SIZE 0x10000 #endif /* !CONFIG_KERNEL_BZIP2 */
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:30 +0100 |
| Subject | [PATCH 3.14 51/59] arm64: KVM: Fix AArch32 to AArch64 register mapping |
| Message-ID | <qVDWZ-8oV-75@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <marc.zyngier@arm.com>
commit c0f0963464c24e034b858441205455bf2a5d93ad upstream.
When running a 32bit guest under a 64bit hypervisor, the ARMv8
architecture defines a mapping of the 32bit registers in the 64bit
space. This includes banked registers that are being demultiplexed
over the 64bit ones.
On exceptions caused by an operation involving a 32bit register, the
HW exposes the register number in the ESR_EL2 register. It was so
far understood that SW had to distinguish between AArch32 and AArch64
accesses (based on the current AArch32 mode and register number).
It turns out that I misinterpreted the ARM ARM, and the clue is in
D1.20.1: "For some exceptions, the exception syndrome given in the
ESR_ELx identifies one or more register numbers from the issued
instruction that generated the exception. Where the exception is
taken from an Exception level using AArch32 these register numbers
give the AArch64 view of the register."
Which means that the HW is already giving us the translated version,
and that we shouldn't try to interpret it at all (for example, doing
an MMIO operation from the IRQ mode using the LR register leads to
very unexpected behaviours).
The fix is thus not to perform a call to vcpu_reg32() at all from
vcpu_reg(), and use whatever register number is supplied directly.
The only case we need to find out about the mapping is when we
actively generate a register access, which only occurs when injecting
a fault in a guest.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/kvm_emulate.h | 8 +++++---
arch/arm64/kvm/inject_fault.c | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -86,11 +86,13 @@ static inline void vcpu_set_thumb(struct
*vcpu_cpsr(vcpu) |= COMPAT_PSR_T_BIT;
}
+/*
+ * vcpu_reg should always be passed a register number coming from a
+ * read of ESR_EL2. Otherwise, it may give the wrong result on AArch32
+ * with banked registers.
+ */
static inline unsigned long *vcpu_reg(const struct kvm_vcpu *vcpu, u8 reg_num)
{
- if (vcpu_mode_is_32bit(vcpu))
- return vcpu_reg32(vcpu, reg_num);
-
return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.regs[reg_num];
}
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -48,7 +48,7 @@ static void prepare_fault32(struct kvm_v
/* Note: These now point to the banked copies */
*vcpu_spsr(vcpu) = new_spsr_value;
- *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
+ *vcpu_reg32(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
/* Branch to exception vector */
if (sctlr & (1 << 13))
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 11/59] ALSA: hda - Add inverted dmic for Packard Bell DOTS |
| Message-ID | <qVE6B-8tR-1@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Henningsson <david.henningsson@canonical.com>
commit 02f6ff90400d055f08b0ba0b5f0707630b6faed7 upstream.
On the internal mic of the Packard Bell DOTS, one channel
has an inverted signal. Add a quirk to fix this up.
BugLink: https://bugs.launchpad.net/bugs/1523232
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5337,6 +5337,7 @@ static const struct hda_fixup alc662_fix
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1025, 0x022f, "Acer Aspire One", ALC662_FIXUP_INV_DMIC),
+ SND_PCI_QUIRK(0x1025, 0x0241, "Packard Bell DOTS", ALC662_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x1025, 0x0349, "eMachines eM250", ALC662_FIXUP_INV_DMIC),
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 14/59] ALSA: seq: Fix missing NULL check at remove_events ioctl |
| Message-ID | <qVE6C-8tR-7@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Takashi Iwai <tiwai@suse.de> commit 030e2c78d3a91dd0d27fef37e91950dde333eba1 upstream. snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/core/seq/seq_clientmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -1950,7 +1950,7 @@ static int snd_seq_ioctl_remove_events(s * No restrictions so for a user client we can clear * the whole fifo */ - if (client->type == USER_CLIENT) + if (client->type == USER_CLIENT && client->data.user.fifo) snd_seq_fifo_clear(client->data.user.fifo); }
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 23/59] ASoC: wm8962: correct addresses for HPF_C_0/1 |
| Message-ID | <qVE6C-8tR-15@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sachin Pandhare <sachinpandhare@gmail.com>
commit e9f96bc53c1b959859599cb30ce6fd4fbb4448c2 upstream.
>From datasheet:
R17408 (4400h) HPF_C_1
R17409 (4401h) HPF_C_0
17048 -> 17408 (0x4400)
17049 -> 17409 (0x4401)
Signed-off-by: Sachin Pandhare <sachinpandhare@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/wm8962.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -364,8 +364,8 @@ static struct reg_default wm8962_reg[] =
{ 16924, 0x0059 }, /* R16924 - HDBASS_PG_1 */
{ 16925, 0x999A }, /* R16925 - HDBASS_PG_0 */
- { 17048, 0x0083 }, /* R17408 - HPF_C_1 */
- { 17049, 0x98AD }, /* R17409 - HPF_C_0 */
+ { 17408, 0x0083 }, /* R17408 - HPF_C_1 */
+ { 17409, 0x98AD }, /* R17409 - HPF_C_0 */
{ 17920, 0x007F }, /* R17920 - ADCL_RETUNE_C1_1 */
{ 17921, 0xFFFF }, /* R17921 - ADCL_RETUNE_C1_0 */
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 16/59] ALSA: timer: Harden slave timer list handling |
| Message-ID | <qVE6D-8tR-35@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit b5a663aa426f4884c71cd8580adae73f33570f0d upstream.
A slave timer instance might be still accessible in a racy way while
operating the master instance as it lacks of locking. Since the
master operation is mostly protected with timer->lock, we should cope
with it while changing the slave instance, too. Also, some linked
lists (active_list and ack_list) of slave instances aren't unlinked
immediately at stopping or closing, and this may lead to unexpected
accesses.
This patch tries to address these issues. It adds spin lock of
timer->lock (either from master or slave, which is equivalent) in a
few places. For avoiding a deadlock, we ensure that the global
slave_active_lock is always locked at first before each timer lock.
Also, ack and active_list of slave instances are properly unlinked at
snd_timer_stop() and snd_timer_close().
Last but not least, remove the superfluous call of _snd_timer_stop()
at removing slave links. This is a noop, and calling it may confuse
readers wrt locking. Further cleanup will follow in a later patch.
Actually we've got reports of use-after-free by syzkaller fuzzer, and
this hopefully fixes these issues.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/timer.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -215,11 +215,13 @@ static void snd_timer_check_master(struc
slave->slave_id == master->slave_id) {
list_move_tail(&slave->open_list, &master->slave_list_head);
spin_lock_irq(&slave_active_lock);
+ spin_lock(&master->timer->lock);
slave->master = master;
slave->timer = master->timer;
if (slave->flags & SNDRV_TIMER_IFLG_RUNNING)
list_add_tail(&slave->active_list,
&master->slave_active_head);
+ spin_unlock(&master->timer->lock);
spin_unlock_irq(&slave_active_lock);
}
}
@@ -345,15 +347,18 @@ int snd_timer_close(struct snd_timer_ins
timer->hw.close)
timer->hw.close(timer);
/* remove slave links */
+ spin_lock_irq(&slave_active_lock);
+ spin_lock(&timer->lock);
list_for_each_entry_safe(slave, tmp, &timeri->slave_list_head,
open_list) {
- spin_lock_irq(&slave_active_lock);
- _snd_timer_stop(slave, 1, SNDRV_TIMER_EVENT_RESOLUTION);
list_move_tail(&slave->open_list, &snd_timer_slave_list);
slave->master = NULL;
slave->timer = NULL;
- spin_unlock_irq(&slave_active_lock);
+ list_del_init(&slave->ack_list);
+ list_del_init(&slave->active_list);
}
+ spin_unlock(&timer->lock);
+ spin_unlock_irq(&slave_active_lock);
mutex_unlock(®ister_mutex);
}
out:
@@ -440,9 +445,12 @@ static int snd_timer_start_slave(struct
spin_lock_irqsave(&slave_active_lock, flags);
timeri->flags |= SNDRV_TIMER_IFLG_RUNNING;
- if (timeri->master)
+ if (timeri->master && timeri->timer) {
+ spin_lock(&timeri->timer->lock);
list_add_tail(&timeri->active_list,
&timeri->master->slave_active_head);
+ spin_unlock(&timeri->timer->lock);
+ }
spin_unlock_irqrestore(&slave_active_lock, flags);
return 1; /* delayed start */
}
@@ -488,6 +496,8 @@ static int _snd_timer_stop(struct snd_ti
if (!keep_flag) {
spin_lock_irqsave(&slave_active_lock, flags);
timeri->flags &= ~SNDRV_TIMER_IFLG_RUNNING;
+ list_del_init(&timeri->ack_list);
+ list_del_init(&timeri->active_list);
spin_unlock_irqrestore(&slave_active_lock, flags);
}
goto __end;
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 17/59] ALSA: timer: Fix race among timer ioctls |
| Message-ID | <qVE6D-8tR-45@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit af368027a49a751d6ff4ee9e3f9961f35bb4fede upstream.
ALSA timer ioctls have an open race and this may lead to a
use-after-free of timer instance object. A simplistic fix is to make
each ioctl exclusive. We have already tread_sem for controlling the
tread, and extend this as a global mutex to be applied to each ioctl.
The downside is, of course, the worse concurrency. But these ioctls
aren't to be parallel accessible, in anyway, so it should be fine to
serialize there.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/timer.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -73,7 +73,7 @@ struct snd_timer_user {
struct timespec tstamp; /* trigger tstamp */
wait_queue_head_t qchange_sleep;
struct fasync_struct *fasync;
- struct mutex tread_sem;
+ struct mutex ioctl_lock;
};
/* list of timers */
@@ -1266,7 +1266,7 @@ static int snd_timer_user_open(struct in
return -ENOMEM;
spin_lock_init(&tu->qlock);
init_waitqueue_head(&tu->qchange_sleep);
- mutex_init(&tu->tread_sem);
+ mutex_init(&tu->ioctl_lock);
tu->ticks = 1;
tu->queue_size = 128;
tu->queue = kmalloc(tu->queue_size * sizeof(struct snd_timer_read),
@@ -1286,8 +1286,10 @@ static int snd_timer_user_release(struct
if (file->private_data) {
tu = file->private_data;
file->private_data = NULL;
+ mutex_lock(&tu->ioctl_lock);
if (tu->timeri)
snd_timer_close(tu->timeri);
+ mutex_unlock(&tu->ioctl_lock);
kfree(tu->queue);
kfree(tu->tqueue);
kfree(tu);
@@ -1525,7 +1527,6 @@ static int snd_timer_user_tselect(struct
int err = 0;
tu = file->private_data;
- mutex_lock(&tu->tread_sem);
if (tu->timeri) {
snd_timer_close(tu->timeri);
tu->timeri = NULL;
@@ -1569,7 +1570,6 @@ static int snd_timer_user_tselect(struct
}
__err:
- mutex_unlock(&tu->tread_sem);
return err;
}
@@ -1782,7 +1782,7 @@ enum {
SNDRV_TIMER_IOCTL_PAUSE_OLD = _IO('T', 0x23),
};
-static long snd_timer_user_ioctl(struct file *file, unsigned int cmd,
+static long __snd_timer_user_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct snd_timer_user *tu;
@@ -1799,17 +1799,11 @@ static long snd_timer_user_ioctl(struct
{
int xarg;
- mutex_lock(&tu->tread_sem);
- if (tu->timeri) { /* too late */
- mutex_unlock(&tu->tread_sem);
+ if (tu->timeri) /* too late */
return -EBUSY;
- }
- if (get_user(xarg, p)) {
- mutex_unlock(&tu->tread_sem);
+ if (get_user(xarg, p))
return -EFAULT;
- }
tu->tread = xarg ? 1 : 0;
- mutex_unlock(&tu->tread_sem);
return 0;
}
case SNDRV_TIMER_IOCTL_GINFO:
@@ -1842,6 +1836,18 @@ static long snd_timer_user_ioctl(struct
return -ENOTTY;
}
+static long snd_timer_user_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct snd_timer_user *tu = file->private_data;
+ long ret;
+
+ mutex_lock(&tu->ioctl_lock);
+ ret = __snd_timer_user_ioctl(file, cmd, arg);
+ mutex_unlock(&tu->ioctl_lock);
+ return ret;
+}
+
static int snd_timer_user_fasync(int fd, struct file * file, int on)
{
struct snd_timer_user *tu;
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 25/59] ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz |
| Message-ID | <qVE6D-8tR-47@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Nikesh Oswal <Nikesh.Oswal@cirrus.com> commit e73694d871867cae8471d2350ce89acb38bc2b63 upstream. For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as we test for a multiple of 8kHz. This patch fixes this issue by testing for multiples of 4kHz instead. Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/soc/codecs/arizona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -1171,7 +1171,7 @@ static int arizona_hw_params(struct snd_ int chan_limit = arizona->pdata.max_channels_clocked[dai->id - 1]; int bclk, lrclk, wl, frame, bclk_target; - if (params_rate(params) % 8000) + if (params_rate(params) % 4000) rates = &arizona_44k1_bclk_rates[0]; else rates = &arizona_48k_bclk_rates[0];
[toc] | [prev] | [next] | [standalone]
| From | Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|---|---|
| Date | 2016-01-27 20:40 +0100 |
| Subject | [PATCH 3.14 10/59] ALSA: rme96: Fix unexpected volume reset after rate changes |
| Message-ID | <qVE6E-8tR-59@gated-at.bofh.it> |
| In reply to | #1319455 |
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit a74a821624c0c75388a193337babd17a8c02c740 upstream.
rme96 driver needs to reset DAC depending on the sample rate, and this
results in resetting to the max volume suddenly. It's because of the
missing call of snd_rme96_apply_dac_volume().
However, calling this function right after the DAC reset still may not
work, and we need some delay before this call. Since the DAC reset
and the procedure after that are performed in the spinlock, we delay
the DAC volume restore at the end after the spinlock.
Reported-and-tested-by: Sylvain LABOISNE <maeda1@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/rme96.c | 41 ++++++++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 15 deletions(-)
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -742,10 +742,11 @@ snd_rme96_playback_setrate(struct rme96
{
/* change to/from double-speed: reset the DAC (if available) */
snd_rme96_reset_dac(rme96);
+ return 1; /* need to restore volume */
} else {
writel(rme96->wcreg, rme96->iobase + RME96_IO_CONTROL_REGISTER);
+ return 0;
}
- return 0;
}
static int
@@ -983,6 +984,7 @@ snd_rme96_playback_hw_params(struct snd_
struct rme96 *rme96 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
int err, rate, dummy;
+ bool apply_dac_volume = false;
runtime->dma_area = (void __force *)(rme96->iobase +
RME96_IO_PLAY_BUFFER);
@@ -996,24 +998,26 @@ snd_rme96_playback_hw_params(struct snd_
{
/* slave clock */
if ((int)params_rate(params) != rate) {
- spin_unlock_irq(&rme96->lock);
- return -EIO;
- }
- } else if ((err = snd_rme96_playback_setrate(rme96, params_rate(params))) < 0) {
- spin_unlock_irq(&rme96->lock);
- return err;
- }
- if ((err = snd_rme96_playback_setformat(rme96, params_format(params))) < 0) {
- spin_unlock_irq(&rme96->lock);
- return err;
+ err = -EIO;
+ goto error;
+ }
+ } else {
+ err = snd_rme96_playback_setrate(rme96, params_rate(params));
+ if (err < 0)
+ goto error;
+ apply_dac_volume = err > 0; /* need to restore volume later? */
}
+
+ err = snd_rme96_playback_setformat(rme96, params_format(params));
+ if (err < 0)
+ goto error;
snd_rme96_setframelog(rme96, params_channels(params), 1);
if (rme96->capture_periodsize != 0) {
if (params_period_size(params) << rme96->playback_frlog !=
rme96->capture_periodsize)
{
- spin_unlock_irq(&rme96->lock);
- return -EBUSY;
+ err = -EBUSY;
+ goto error;
}
}
rme96->playback_periodsize =
@@ -1024,9 +1028,16 @@ snd_rme96_playback_hw_params(struct snd_
rme96->wcreg &= ~(RME96_WCR_PRO | RME96_WCR_DOLBY | RME96_WCR_EMP);
writel(rme96->wcreg |= rme96->wcreg_spdif_stream, rme96->iobase + RME96_IO_CONTROL_REGISTER);
}
+
+ err = 0;
+ error:
spin_unlock_irq(&rme96->lock);
-
- return 0;
+ if (apply_dac_volume) {
+ usleep_range(3000, 10000);
+ snd_rme96_apply_dac_volume(rme96);
+ }
+
+ return err;
}
static int
[toc] | [prev] | [next] | [standalone]
Page 2 of 3 — ← Prev page 1 [2] 3 Next page →
Back to top | Article view | linux.kernel
csiph-web