Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1319106 > unrolled thread

[PATCH 7/7] scsi_dh: force modular build if SCSI is a module

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 7/7] scsi_dh: force modular build if SCSI is a module Arnd Bergmann <arnd@arndb.de> - 2016-01-27 17:10 +0100

#1319106 — [PATCH 7/7] scsi_dh: force modular build if SCSI is a module

When the scsi_dh core was moved into the scsi core module,
CONFIG_SCSI_DH became a 'bool' option, and now anything depending
on it can be built-in even when CONFIG_SCSI=m. This of course
cannot link successfully:

drivers/scsi/built-in.o: In function `rdac_init':
scsi_dh_alua.c:(.init.text+0x14): undefined reference to `scsi_register_device_handler'
scsi_dh_alua.c:(.init.text+0x64): undefined reference to `scsi_unregister_device_handler'
drivers/scsi/built-in.o: In function `alua_init':
scsi_dh_alua.c:(.init.text+0xb0): undefined reference to `scsi_register_device_handler'

As a workaround, this adds an extra dependency on CONFIG_SCSI,
so Kconfig can figure out whether built-in is allowed or not.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code")
---
 drivers/scsi/device_handler/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig
index e5647d59224f..0b331c9c0a8f 100644
--- a/drivers/scsi/device_handler/Kconfig
+++ b/drivers/scsi/device_handler/Kconfig
@@ -13,13 +13,13 @@ menuconfig SCSI_DH
 
 config SCSI_DH_RDAC
 	tristate "LSI RDAC Device Handler"
-	depends on SCSI_DH
+	depends on SCSI_DH && SCSI
 	help
 	If you have a LSI RDAC select y. Otherwise, say N.
 
 config SCSI_DH_HP_SW
 	tristate "HP/COMPAQ MSA Device Handler"
-	depends on SCSI_DH
+	depends on SCSI_DH && SCSI
 	help
 	If you have a HP/COMPAQ MSA device that requires START_STOP to
 	be sent to start it and cannot upgrade the firmware then select y.
@@ -27,13 +27,13 @@ config SCSI_DH_HP_SW
 
 config SCSI_DH_EMC
 	tristate "EMC CLARiiON Device Handler"
-	depends on SCSI_DH
+	depends on SCSI_DH && SCSI
 	help
 	If you have a EMC CLARiiON select y. Otherwise, say N.
 
 config SCSI_DH_ALUA
 	tristate "SPC-3 ALUA Device Handler"
-	depends on SCSI_DH
+	depends on SCSI_DH && SCSI
 	help
 	  SCSI Device handler for generic SPC-3 Asymmetric Logical Unit
 	  Access (ALUA).
-- 
2.7.0

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web