Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1317743 > unrolled thread
| Started by | Nicolas Ferre <nicolas.ferre@atmel.com> |
|---|---|
| First post | 2016-01-26 12:10 +0100 |
| Last post | 2016-01-26 12:20 +0100 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v2] serial: atmel: Use atmel_port consistently Nicolas Ferre <nicolas.ferre@atmel.com> - 2016-01-26 12:10 +0100
Re: [PATCH v2] serial: atmel: Use atmel_port consistently Nicolas Ferre <nicolas.ferre@atmel.com> - 2016-01-26 12:20 +0100
| From | Nicolas Ferre <nicolas.ferre@atmel.com> |
|---|---|
| Date | 2016-01-26 12:10 +0100 |
| Subject | [PATCH v2] serial: atmel: Use atmel_port consistently |
| Message-ID | <qV9Fx-3em-23@gated-at.bofh.it> |
From: Jaeden Amero <jaeden.amero@ni.com>
In all functions other than atmel_serial_probe_fifos,
atmel_serial_probe, and atmel_console_init, the name "port" is used to
refer to an instance of struct uart_port. In many of these functions,
"atmel_port" is used to refer to an instance of struct atmel_uart_port.
We make the use of the name "port" consistent by making
atmel_serial_probe_fifos, atmel_serial_probe, and atmel_console_init
use "atmel_port" to refer to an instance of struct atmel_uart_port
instead of the previous name of "port".
Signed-off-by: Jaeden Amero <jaeden.amero@ni.com>
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Acked-by: Karthik Manamcheri <karthik.manamcheri@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
v2: - fix typo in variable
drivers/tty/serial/atmel_serial.c | 81 ++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 40 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1c0884d8ef32..555111955b75 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2478,13 +2478,13 @@ static int __init atmel_console_init(void)
struct atmel_uart_data *pdata =
dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
- struct atmel_uart_port *port = &atmel_ports[id];
+ struct atmel_uart_port *atmel_port = &atmel_ports[id];
- port->backup_imr = 0;
- port->uart.line = id;
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
- ret = atmel_init_port(port, atmel_default_console_device);
+ ret = atmel_init_port(atmel_port, atmel_default_console_device);
if (ret)
return ret;
register_console(&atmel_console);
@@ -2599,23 +2599,23 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
-static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
+static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
- port->fifo_size = 0;
- port->rts_low = 0;
- port->rts_high = 0;
+ atmel_port->fifo_size = 0;
+ atmel_port->rts_low = 0;
+ atmel_port->rts_high = 0;
if (of_property_read_u32(pdev->dev.of_node,
"atmel,fifo-size",
- &port->fifo_size))
+ &atmel_port->fifo_size))
return;
- if (!port->fifo_size)
+ if (!atmel_port->fifo_size)
return;
- if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
- port->fifo_size = 0;
+ if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
+ atmel_port->fifo_size = 0;
dev_err(&pdev->dev, "Invalid FIFO size\n");
return;
}
@@ -2628,22 +2628,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
* Threshold to a reasonably high value respecting this 16 data
* empirical rule when possible.
*/
- port->rts_high = max_t(int, port->fifo_size >> 1,
- port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
- port->rts_low = max_t(int, port->fifo_size >> 2,
- port->fifo_size - ATMEL_RTS_LOW_OFFSET);
+ atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1,
+ atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
+ atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2,
+ atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET);
dev_info(&pdev->dev, "Using FIFO (%u data)\n",
- port->fifo_size);
+ atmel_port->fifo_size);
dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
- port->rts_high);
+ atmel_port->rts_high);
dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
- port->rts_low);
+ atmel_port->rts_low);
}
static int atmel_serial_probe(struct platform_device *pdev)
{
- struct atmel_uart_port *port;
+ struct atmel_uart_port *atmel_port;
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
@@ -2674,14 +2674,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err;
}
- port = &atmel_ports[ret];
- port->backup_imr = 0;
- port->uart.line = ret;
- atmel_serial_probe_fifos(port, pdev);
+ atmel_port = &atmel_ports[ret];
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = ret;
+ atmel_serial_probe_fifos(atmel_port, pdev);
- spin_lock_init(&port->lock_suspended);
+ spin_lock_init(&atmel_port->lock_suspended);
- ret = atmel_init_port(port, pdev);
+ ret = atmel_init_port(atmel_port, pdev);
if (ret)
goto err_clear_bit;
@@ -2691,34 +2691,34 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err_clear_bit;
}
- if (!atmel_use_pdc_rx(&port->uart)) {
+ if (!atmel_use_pdc_rx(&atmel_port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
if (!data)
goto err_alloc_ring;
- port->rx_ring.buf = data;
+ atmel_port->rx_ring.buf = data;
}
- rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
+ rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED;
- ret = uart_add_one_port(&atmel_uart, &port->uart);
+ ret = uart_add_one_port(&atmel_uart, &atmel_port->uart);
if (ret)
goto err_add_port;
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
- if (atmel_is_console_port(&port->uart)
+ if (atmel_is_console_port(&atmel_port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
* the clk_prepare_enable() in atmel_console_setup()
*/
- clk_disable_unprepare(port->clk);
+ clk_disable_unprepare(atmel_port->clk);
}
#endif
device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
+ platform_set_drvdata(pdev, atmel_port);
/*
* The peripheral clock has been disabled by atmel_init_port():
@@ -2727,9 +2727,10 @@ static int atmel_serial_probe(struct platform_device *pdev)
clk_prepare_enable(port->clk);
if (rs485_enabled) {
- atmel_uart_writel(&port->uart, ATMEL_US_MR,
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
ATMEL_US_USMODE_NORMAL);
- atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR,
+ ATMEL_US_RTSEN);
}
/*
@@ -2746,12 +2747,12 @@ static int atmel_serial_probe(struct platform_device *pdev)
return 0;
err_add_port:
- kfree(port->rx_ring.buf);
- port->rx_ring.buf = NULL;
+ kfree(atmel_port->rx_ring.buf);
+ atmel_port->rx_ring.buf = NULL;
err_alloc_ring:
- if (!atmel_is_console_port(&port->uart)) {
- clk_put(port->clk);
- port->clk = NULL;
+ if (!atmel_is_console_port(&atmel_port->uart)) {
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
}
err_clear_bit:
clear_bit(port->uart.line, atmel_ports_in_use);
--
2.1.3
[toc] | [next] | [standalone]
| From | Nicolas Ferre <nicolas.ferre@atmel.com> |
|---|---|
| Date | 2016-01-26 12:20 +0100 |
| Message-ID | <qV9Pc-3ib-19@gated-at.bofh.it> |
| In reply to | #1317743 |
Le 26/01/2016 12:04, Nicolas Ferre a écrit :
> From: Jaeden Amero <jaeden.amero@ni.com>
>
> In all functions other than atmel_serial_probe_fifos,
> atmel_serial_probe, and atmel_console_init, the name "port" is used to
> refer to an instance of struct uart_port. In many of these functions,
> "atmel_port" is used to refer to an instance of struct atmel_uart_port.
>
> We make the use of the name "port" consistent by making
> atmel_serial_probe_fifos, atmel_serial_probe, and atmel_console_init
> use "atmel_port" to refer to an instance of struct atmel_uart_port
> instead of the previous name of "port".
>
> Signed-off-by: Jaeden Amero <jaeden.amero@ni.com>
> Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
> Acked-by: Karthik Manamcheri <karthik.manamcheri@ni.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> v2: - fix typo in variable
Okay, let's face it: this patch is outdated.
So this v2 still fails to compile. Before hiding in a deep hole, I
recompile this driver, test it and send a v3. Here again, sorry for the
noise :-(
Bye,
> drivers/tty/serial/atmel_serial.c | 81 ++++++++++++++++++++-------------------
> 1 file changed, 41 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 1c0884d8ef32..555111955b75 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -2478,13 +2478,13 @@ static int __init atmel_console_init(void)
> struct atmel_uart_data *pdata =
> dev_get_platdata(&atmel_default_console_device->dev);
> int id = pdata->num;
> - struct atmel_uart_port *port = &atmel_ports[id];
> + struct atmel_uart_port *atmel_port = &atmel_ports[id];
>
> - port->backup_imr = 0;
> - port->uart.line = id;
> + atmel_port->backup_imr = 0;
> + atmel_port->uart.line = id;
>
> add_preferred_console(ATMEL_DEVICENAME, id, NULL);
> - ret = atmel_init_port(port, atmel_default_console_device);
> + ret = atmel_init_port(atmel_port, atmel_default_console_device);
> if (ret)
> return ret;
> register_console(&atmel_console);
> @@ -2599,23 +2599,23 @@ static int atmel_serial_resume(struct platform_device *pdev)
> #define atmel_serial_resume NULL
> #endif
>
> -static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
> +static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
> struct platform_device *pdev)
> {
> - port->fifo_size = 0;
> - port->rts_low = 0;
> - port->rts_high = 0;
> + atmel_port->fifo_size = 0;
> + atmel_port->rts_low = 0;
> + atmel_port->rts_high = 0;
>
> if (of_property_read_u32(pdev->dev.of_node,
> "atmel,fifo-size",
> - &port->fifo_size))
> + &atmel_port->fifo_size))
> return;
>
> - if (!port->fifo_size)
> + if (!atmel_port->fifo_size)
> return;
>
> - if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
> - port->fifo_size = 0;
> + if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
> + atmel_port->fifo_size = 0;
> dev_err(&pdev->dev, "Invalid FIFO size\n");
> return;
> }
> @@ -2628,22 +2628,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
> * Threshold to a reasonably high value respecting this 16 data
> * empirical rule when possible.
> */
> - port->rts_high = max_t(int, port->fifo_size >> 1,
> - port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
> - port->rts_low = max_t(int, port->fifo_size >> 2,
> - port->fifo_size - ATMEL_RTS_LOW_OFFSET);
> + atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1,
> + atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
> + atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2,
> + atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET);
>
> dev_info(&pdev->dev, "Using FIFO (%u data)\n",
> - port->fifo_size);
> + atmel_port->fifo_size);
> dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
> - port->rts_high);
> + atmel_port->rts_high);
> dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
> - port->rts_low);
> + atmel_port->rts_low);
> }
>
> static int atmel_serial_probe(struct platform_device *pdev)
> {
> - struct atmel_uart_port *port;
> + struct atmel_uart_port *atmel_port;
> struct device_node *np = pdev->dev.of_node;
> struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
> void *data;
> @@ -2674,14 +2674,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
> goto err;
> }
>
> - port = &atmel_ports[ret];
> - port->backup_imr = 0;
> - port->uart.line = ret;
> - atmel_serial_probe_fifos(port, pdev);
> + atmel_port = &atmel_ports[ret];
> + atmel_port->backup_imr = 0;
> + atmel_port->uart.line = ret;
> + atmel_serial_probe_fifos(atmel_port, pdev);
>
> - spin_lock_init(&port->lock_suspended);
> + spin_lock_init(&atmel_port->lock_suspended);
>
> - ret = atmel_init_port(port, pdev);
> + ret = atmel_init_port(atmel_port, pdev);
> if (ret)
> goto err_clear_bit;
>
> @@ -2691,34 +2691,34 @@ static int atmel_serial_probe(struct platform_device *pdev)
> goto err_clear_bit;
> }
>
> - if (!atmel_use_pdc_rx(&port->uart)) {
> + if (!atmel_use_pdc_rx(&atmel_port->uart)) {
> ret = -ENOMEM;
> data = kmalloc(sizeof(struct atmel_uart_char)
> * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
> if (!data)
> goto err_alloc_ring;
> - port->rx_ring.buf = data;
> + atmel_port->rx_ring.buf = data;
> }
>
> - rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
> + rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED;
>
> - ret = uart_add_one_port(&atmel_uart, &port->uart);
> + ret = uart_add_one_port(&atmel_uart, &atmel_port->uart);
> if (ret)
> goto err_add_port;
>
> #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
> - if (atmel_is_console_port(&port->uart)
> + if (atmel_is_console_port(&atmel_port->uart)
> && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
> /*
> * The serial core enabled the clock for us, so undo
> * the clk_prepare_enable() in atmel_console_setup()
> */
> - clk_disable_unprepare(port->clk);
> + clk_disable_unprepare(atmel_port->clk);
> }
> #endif
>
> device_init_wakeup(&pdev->dev, 1);
> - platform_set_drvdata(pdev, port);
> + platform_set_drvdata(pdev, atmel_port);
>
> /*
> * The peripheral clock has been disabled by atmel_init_port():
> @@ -2727,9 +2727,10 @@ static int atmel_serial_probe(struct platform_device *pdev)
> clk_prepare_enable(port->clk);
>
> if (rs485_enabled) {
> - atmel_uart_writel(&port->uart, ATMEL_US_MR,
> + atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
> ATMEL_US_USMODE_NORMAL);
> - atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
> + atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR,
> + ATMEL_US_RTSEN);
> }
>
> /*
> @@ -2746,12 +2747,12 @@ static int atmel_serial_probe(struct platform_device *pdev)
> return 0;
>
> err_add_port:
> - kfree(port->rx_ring.buf);
> - port->rx_ring.buf = NULL;
> + kfree(atmel_port->rx_ring.buf);
> + atmel_port->rx_ring.buf = NULL;
> err_alloc_ring:
> - if (!atmel_is_console_port(&port->uart)) {
> - clk_put(port->clk);
> - port->clk = NULL;
> + if (!atmel_is_console_port(&atmel_port->uart)) {
> + clk_put(atmel_port->clk);
> + atmel_port->clk = NULL;
> }
> err_clear_bit:
> clear_bit(port->uart.line, atmel_ports_in_use);
>
--
Nicolas Ferre
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web