Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1315501 > unrolled thread
| Started by | Shannon Zhao <zhaoshenglong@huawei.com> |
|---|---|
| First post | 2016-01-23 04:30 +0100 |
| Last post | 2016-01-25 16:30 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v3 10/17] arm/xen: Get event-channel irq through HVM_PARAM when booting with ACPI Shannon Zhao <zhaoshenglong@huawei.com> - 2016-01-23 04:30 +0100
Re: [PATCH v3 10/17] arm/xen: Get event-channel irq through HVM_PARAM when booting with ACPI Stefano Stabellini <stefano.stabellini@eu.citrix.com> - 2016-01-25 16:30 +0100
| From | Shannon Zhao <zhaoshenglong@huawei.com> |
|---|---|
| Date | 2016-01-23 04:30 +0100 |
| Subject | [PATCH v3 10/17] arm/xen: Get event-channel irq through HVM_PARAM when booting with ACPI |
| Message-ID | <qTX3I-5bz-23@gated-at.bofh.it> |
From: Shannon Zhao <shannon.zhao@linaro.org>
When booting with ACPI, it could get the event-channel irq through
HVM_PARAM_CALLBACK_IRQ.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
---
arch/arm/xen/enlighten.c | 36 +++++++++++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 6d90a62..0e010bb 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -29,6 +29,7 @@
#include <linux/time64.h>
#include <linux/timekeeping.h>
#include <linux/timekeeper_internal.h>
+#include <linux/acpi.h>
#include <linux/mm.h>
@@ -262,6 +263,35 @@ void __init xen_early_init(void)
add_preferred_console("hvc", 0, NULL);
}
+static void __init xen_acpi_guest_init_events_irq(void)
+{
+#ifdef CONFIG_ACPI
+ struct xen_hvm_param a;
+ int interrupt, trigger, polarity;
+
+ a.domid = DOMID_SELF;
+ a.index = HVM_PARAM_CALLBACK_IRQ;
+ xen_events_irq = 0;
+
+ if (!HYPERVISOR_hvm_op(HVMOP_get_param, &a)) {
+ if ((a.value >> 56) == HVM_PARAM_CALLBACK_TYPE_EVENT) {
+ interrupt = a.value & 0xff;
+ trigger = ((a.value >> 8) & 0x1) ? ACPI_EDGE_SENSITIVE
+ : ACPI_LEVEL_SENSITIVE;
+ polarity = ((a.value >> 8) & 0x2) ? ACPI_ACTIVE_LOW
+ : ACPI_ACTIVE_HIGH;
+ xen_events_irq = acpi_register_gsi(NULL, interrupt,
+ trigger, polarity);
+ }
+ }
+#endif
+}
+
+static void __init xen_dt_guest_init_events_irq(void)
+{
+ xen_events_irq = irq_of_parse_and_map(xen_node, 0);
+}
+
static int __init xen_guest_init(void)
{
struct xen_add_to_physmap xatp;
@@ -270,7 +300,11 @@ static int __init xen_guest_init(void)
if (!xen_domain())
return 0;
- xen_events_irq = irq_of_parse_and_map(xen_node, 0);
+ if (!acpi_disabled)
+ xen_acpi_guest_init_events_irq();
+ else
+ xen_dt_guest_init_events_irq();
+
if (!xen_events_irq) {
pr_err("Xen event channel interrupt not found\n");
return -ENODEV;
--
2.0.4
[toc] | [next] | [standalone]
| From | Stefano Stabellini <stefano.stabellini@eu.citrix.com> |
|---|---|
| Date | 2016-01-25 16:30 +0100 |
| Subject | Re: [PATCH v3 10/17] arm/xen: Get event-channel irq through HVM_PARAM when booting with ACPI |
| Message-ID | <qURfA-5VH-11@gated-at.bofh.it> |
| In reply to | #1315501 |
On Sat, 23 Jan 2016, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
>
> When booting with ACPI, it could get the event-channel irq through
> HVM_PARAM_CALLBACK_IRQ.
>
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
> arch/arm/xen/enlighten.c | 36 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
> index 6d90a62..0e010bb 100644
> --- a/arch/arm/xen/enlighten.c
> +++ b/arch/arm/xen/enlighten.c
> @@ -29,6 +29,7 @@
> #include <linux/time64.h>
> #include <linux/timekeeping.h>
> #include <linux/timekeeper_internal.h>
> +#include <linux/acpi.h>
>
> #include <linux/mm.h>
>
> @@ -262,6 +263,35 @@ void __init xen_early_init(void)
> add_preferred_console("hvc", 0, NULL);
> }
>
> +static void __init xen_acpi_guest_init_events_irq(void)
please rename it to "xen_acpi_guest_init"
> +{
> +#ifdef CONFIG_ACPI
> + struct xen_hvm_param a;
> + int interrupt, trigger, polarity;
> +
> + a.domid = DOMID_SELF;
> + a.index = HVM_PARAM_CALLBACK_IRQ;
> + xen_events_irq = 0;
> +
> + if (!HYPERVISOR_hvm_op(HVMOP_get_param, &a)) {
> + if ((a.value >> 56) == HVM_PARAM_CALLBACK_TYPE_EVENT) {
> + interrupt = a.value & 0xff;
> + trigger = ((a.value >> 8) & 0x1) ? ACPI_EDGE_SENSITIVE
> + : ACPI_LEVEL_SENSITIVE;
> + polarity = ((a.value >> 8) & 0x2) ? ACPI_ACTIVE_LOW
> + : ACPI_ACTIVE_HIGH;
> + xen_events_irq = acpi_register_gsi(NULL, interrupt,
> + trigger, polarity);
> + }
> + }
> +#endif
> +}
> +
> +static void __init xen_dt_guest_init_events_irq(void)
"xen_dt_guest_init"
Provided that you make these two changes:
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> +{
> + xen_events_irq = irq_of_parse_and_map(xen_node, 0);
> +}
> +
> static int __init xen_guest_init(void)
> {
> struct xen_add_to_physmap xatp;
> @@ -270,7 +300,11 @@ static int __init xen_guest_init(void)
> if (!xen_domain())
> return 0;
>
> - xen_events_irq = irq_of_parse_and_map(xen_node, 0);
> + if (!acpi_disabled)
> + xen_acpi_guest_init_events_irq();
> + else
> + xen_dt_guest_init_events_irq();
> +
> if (!xen_events_irq) {
> pr_err("Xen event channel interrupt not found\n");
> return -ENODEV;
> --
> 2.0.4
>
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web