Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1312205 > unrolled thread

[PATCH V3 00/10] Introduce ACPI world to GICv3 & ITS irqchip

Back to article view | Back to linux.kernel

Contents

  [PATCH V3 00/10] Introduce ACPI world to GICv3 & ITS irqchip Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 09/10] acpi, gicv3, msi: Factor out code that might be reused for ACPI equivalent. Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 05/10] irqchip, gicv3, its: Mark its_init() and its children as __init Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 06/10] irqchip, GICv3, ITS: Refator ITS dt init code to prepare for ACPI. Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 04/10] irqchip / GICv3: remove gic root node in ITS Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 01/10] irqchip / GICv3: Refactor gic_of_init() for GICv3 driver Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 08/10] irqchip, gicv3, its: Probe ITS in the ACPI way. Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 07/10] ARM64, ACPI, PCI: I/O Remapping Table (IORT) initial support. Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    [PATCH V3 03/10] irqchip,GICv3,ACPI: Add redistributor support via GICC structures. Tomasz Nowicki <tn@semihalf.com> - 2016-01-19 14:20 +0100
    Re: [PATCH V3 00/10] Introduce ACPI world to GICv3 & ITS irqchip Christopher Covington <cov@codeaurora.org> - 2016-01-22 23:00 +0100
    Re: [PATCH V3 00/10] Introduce ACPI world to GICv3 & ITS irqchip Robert Richter <robert.richter@caviumnetworks.com> - 2016-01-23 01:40 +0100

#1312205 — [PATCH V3 00/10] Introduce ACPI world to GICv3 & ITS irqchip

Patches base on Suravee's ACPI GICv2m support:
https://lkml.org/lkml/2015/12/10/475

The following git branch contains submitted patches along with
the useful patches from the test point of view (mainly ACPI ARM64 PCI support).
https://github.com/semihalf-nowicki-tomasz/linux.git (gicv3-its-acpi-v3)

Series has been tested on Cavium ThunderX server.

v2 -> v3
- rebased on top of 4.4
- fixes and improvements for redistributor init via GICC structures
- fixes as per kbuild reports

v1 -> v2
- rebased on top of 4.4-rc4
- use pci_msi_domain_get_msi_rid for requester ID to device ID translation

Hanjun Guo (1):
  irqchip / GICv3: remove gic root node in ITS

Tomasz Nowicki (9):
  irqchip / GICv3: Refactor gic_of_init() for GICv3 driver
  irqchip / GICv3: Add ACPI support for GICv3+ initialization
  irqchip,GICv3,ACPI: Add redistributor support via GICC structures.
  irqchip, gicv3, its: Mark its_init() and its children as __init
  irqchip, GICv3, ITS: Refator ITS dt init code to prepare for ACPI.
  ARM64, ACPI, PCI: I/O Remapping Table (IORT) initial support.
  irqchip, gicv3, its: Probe ITS in the ACPI way.
  acpi, gicv3, msi: Factor out code that might be reused for ACPI
    equivalent.
  acpi, gicv3, its: Use MADT ITS subtable to do PCI/MSI domain
    initialization.

 drivers/acpi/Kconfig                     |   3 +
 drivers/acpi/Makefile                    |   1 +
 drivers/acpi/iort.c                      | 326 +++++++++++++++++++++++++++++
 drivers/irqchip/Kconfig                  |   1 +
 drivers/irqchip/irq-gic-v3-its-pci-msi.c |  85 ++++++--
 drivers/irqchip/irq-gic-v3-its.c         | 143 +++++++++----
 drivers/irqchip/irq-gic-v3.c             | 344 ++++++++++++++++++++++++++-----
 drivers/pci/msi.c                        |   3 +
 include/linux/iort.h                     |  38 ++++
 include/linux/irqchip/arm-gic-v3.h       |   2 +-
 10 files changed, 845 insertions(+), 101 deletions(-)
 create mode 100644 drivers/acpi/iort.c
 create mode 100644 include/linux/iort.h

-- 
1.9.1

[toc] | [next] | [standalone]

#1312207 — [PATCH V3 09/10] acpi, gicv3, msi: Factor out code that might be reused for ACPI equivalent.

Firmware agnostic code lands in separate function which do necessary
domain initialization based on unique domain handler.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/irqchip/irq-gic-v3-its-pci-msi.c | 43 +++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
index aee60ed..06165cb 100644
--- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
@@ -106,34 +106,47 @@ static struct of_device_id its_device_id[] = {
 	{},
 };
 
-static int __init its_pci_msi_init(void)
+static int __init its_pci_msi_init_one(struct fwnode_handle *handle)
 {
-	struct device_node *np;
 	struct irq_domain *parent;
 
+	parent = irq_find_matching_fwnode(handle, DOMAIN_BUS_NEXUS);
+	if (!parent || !msi_get_domain_info(parent)) {
+		pr_err("Unable to locate ITS domain\n");
+		return -ENXIO;
+	}
+
+	if (!pci_msi_create_irq_domain(handle, &its_pci_msi_domain_info,
+				       parent)) {
+		pr_err("Unable to create PCI domain\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int __init its_pci_of_msi_init(void)
+{
+	struct device_node *np;
+
 	for (np = of_find_matching_node(NULL, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
 		if (!of_property_read_bool(np, "msi-controller"))
 			continue;
 
-		parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS);
-		if (!parent || !msi_get_domain_info(parent)) {
-			pr_err("%s: unable to locate ITS domain\n",
-			       np->full_name);
+		if (its_pci_msi_init_one(of_node_to_fwnode(np)))
 			continue;
-		}
-
-		if (!pci_msi_create_irq_domain(of_node_to_fwnode(np),
-					       &its_pci_msi_domain_info,
-					       parent)) {
-			pr_err("%s: unable to create PCI domain\n",
-			       np->full_name);
-			continue;
-		}
 
 		pr_info("PCI/MSI: %s domain created\n", np->full_name);
 	}
 
 	return 0;
 }
+
+static int __init its_pci_msi_init(void)
+{
+	its_pci_of_msi_init();
+	return 0;
+}
+
 early_initcall(its_pci_msi_init);
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312209 — [PATCH V3 05/10] irqchip, gicv3, its: Mark its_init() and its children as __init

gicv3_init_bases() is the only caller for its_init(),
also it is a __init function, so mark its_init() as __init too,
then recursively mark the functions called as __init.

This will help to introduce ITS initialization using ACPI tables as
we will use acpi_table_parse_entries family functions there which
belong to __init section as well.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/irqchip/irq-gic-v3-its.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 7ca7f9a..2bbed18 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -669,7 +669,7 @@ static int its_chunk_to_lpi(int chunk)
 	return (chunk << IRQS_PER_CHUNK_SHIFT) + 8192;
 }
 
-static int its_lpi_init(u32 id_bits)
+static int __init its_lpi_init(u32 id_bits)
 {
 	lpi_chunks = its_lpi_to_chunk(1UL << id_bits);
 
@@ -1424,7 +1424,8 @@ static void its_enable_quirks(struct its_node *its)
 	gic_enable_quirks(iidr, its_quirks, its);
 }
 
-static int its_probe(struct device_node *node, struct irq_domain *parent)
+static int __init its_probe(struct device_node *node,
+			    struct irq_domain *parent)
 {
 	struct resource res;
 	struct its_node *its;
@@ -1585,7 +1586,7 @@ static struct of_device_id its_device_id[] = {
 	{},
 };
 
-int its_init(struct device_node *node, struct rdists *rdists,
+int __init its_init(struct device_node *node, struct rdists *rdists,
 	     struct irq_domain *parent_domain)
 {
 	struct device_node *np;
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312210 — [PATCH V3 06/10] irqchip, GICv3, ITS: Refator ITS dt init code to prepare for ACPI.

Similarly to GICv3 core, we need to extract common code before adding
ACPI support. No functional changes.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/irqchip/irq-gic-v3-its.c   | 82 +++++++++++++++++++++++---------------
 drivers/irqchip/irq-gic-v3.c       |  6 +--
 include/linux/irqchip/arm-gic-v3.h |  2 +-
 3 files changed, 52 insertions(+), 38 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 2bbed18..fecb7a6 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -813,7 +813,7 @@ static void its_free_tables(struct its_node *its)
 	}
 }
 
-static int its_alloc_tables(const char *node_name, struct its_node *its)
+static int its_alloc_tables(struct its_node *its)
 {
 	int err;
 	int i;
@@ -868,8 +868,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 				    order);
 			if (order >= MAX_ORDER) {
 				order = MAX_ORDER - 1;
-				pr_warn("%s: Device Table too large, reduce its page order to %u\n",
-					node_name, order);
+				pr_warn("ITS@0x%lx: Device Table too large, reduce its page order to %u\n",
+					its->phys_base, order);
 			}
 		}
 
@@ -878,8 +878,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		if (alloc_pages > GITS_BASER_PAGES_MAX) {
 			alloc_pages = GITS_BASER_PAGES_MAX;
 			order = get_order(GITS_BASER_PAGES_MAX * psz);
-			pr_warn("%s: Device Table too large, reduce its page order to %u (%u pages)\n",
-				node_name, order, alloc_pages);
+			pr_warn("ITS@0x%lx: Device Table too large, reduce its page order to %u (%u pages)\n",
+				its->phys_base, order, alloc_pages);
 		}
 
 		base = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
@@ -948,8 +948,8 @@ retry_baser:
 		}
 
 		if (val != tmp) {
-			pr_err("ITS: %s: GITS_BASER%d doesn't stick: %lx %lx\n",
-			       node_name, i,
+			pr_err("ITS@0x%lx: GITS_BASER%d doesn't stick: %lx %lx\n",
+			       its->phys_base, i,
 			       (unsigned long) val, (unsigned long) tmp);
 			err = -ENXIO;
 			goto out_free;
@@ -1424,10 +1424,11 @@ static void its_enable_quirks(struct its_node *its)
 	gic_enable_quirks(iidr, its_quirks, its);
 }
 
-static int __init its_probe(struct device_node *node,
-			    struct irq_domain *parent)
+static int __init its_probe_one(phys_addr_t phys_base, unsigned long size,
+				struct irq_domain *parent,
+				bool is_msi_controller,
+				struct fwnode_handle *handler)
 {
-	struct resource res;
 	struct its_node *its;
 	void __iomem *its_base;
 	struct irq_domain *inner_domain;
@@ -1435,33 +1436,26 @@ static int __init its_probe(struct device_node *node,
 	u64 baser, tmp;
 	int err;
 
-	err = of_address_to_resource(node, 0, &res);
-	if (err) {
-		pr_warn("%s: no regs?\n", node->full_name);
-		return -ENXIO;
-	}
-
-	its_base = ioremap(res.start, resource_size(&res));
+	its_base = ioremap(phys_base, size);
 	if (!its_base) {
-		pr_warn("%s: unable to map registers\n", node->full_name);
+		pr_warn("Unable to map ITS registers\n");
 		return -ENOMEM;
 	}
 
 	val = readl_relaxed(its_base + GITS_PIDR2) & GIC_PIDR2_ARCH_MASK;
 	if (val != 0x30 && val != 0x40) {
-		pr_warn("%s: no ITS detected, giving up\n", node->full_name);
+		pr_warn("No ITS detected, giving up\n");
 		err = -ENODEV;
 		goto out_unmap;
 	}
 
 	err = its_force_quiescent(its_base);
 	if (err) {
-		pr_warn("%s: failed to quiesce, giving up\n",
-			node->full_name);
+		pr_warn("Failed to quiesce, giving up\n");
 		goto out_unmap;
 	}
 
-	pr_info("ITS: %s\n", node->full_name);
+	pr_info("ITS@0x%lx\n", (long)phys_base);
 
 	its = kzalloc(sizeof(*its), GFP_KERNEL);
 	if (!its) {
@@ -1473,7 +1467,7 @@ static int __init its_probe(struct device_node *node,
 	INIT_LIST_HEAD(&its->entry);
 	INIT_LIST_HEAD(&its->its_device_list);
 	its->base = its_base;
-	its->phys_base = res.start;
+	its->phys_base = phys_base;
 	its->ite_size = ((readl_relaxed(its_base + GITS_TYPER) >> 4) & 0xf) + 1;
 
 	its->cmd_base = kzalloc(ITS_CMD_QUEUE_SZ, GFP_KERNEL);
@@ -1485,7 +1479,7 @@ static int __init its_probe(struct device_node *node,
 
 	its_enable_quirks(its);
 
-	err = its_alloc_tables(node->full_name, its);
+	err = its_alloc_tables(its);
 	if (err)
 		goto out_free_cmd;
 
@@ -1521,7 +1515,7 @@ static int __init its_probe(struct device_node *node,
 	writeq_relaxed(0, its->base + GITS_CWRITER);
 	writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);
 
-	if (of_property_read_bool(node, "msi-controller")) {
+	if (is_msi_controller) {
 		struct msi_domain_info *info;
 
 		info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -1530,7 +1524,8 @@ static int __init its_probe(struct device_node *node,
 			goto out_free_tables;
 		}
 
-		inner_domain = irq_domain_add_tree(node, &its_domain_ops, its);
+		inner_domain = irq_domain_create_tree(handler, &its_domain_ops,
+						      its);
 		if (!inner_domain) {
 			err = -ENOMEM;
 			kfree(info);
@@ -1558,10 +1553,28 @@ out_free_its:
 	kfree(its);
 out_unmap:
 	iounmap(its_base);
-	pr_err("ITS: failed probing %s (%d)\n", node->full_name, err);
+	pr_err("ITS@0x%lx: failed probing (%d)\n", (long)phys_base, err);
 	return err;
 }
 
+static int __init
+its_of_probe(struct device_node *node, struct irq_domain *parent)
+{
+	struct resource res;
+	bool is_msi_controller = false;
+
+	if (of_address_to_resource(node, 0, &res)) {
+		pr_warn("%s: no regs?\n", node->full_name);
+		return -ENXIO;
+	}
+
+	if (of_property_read_bool(node, "msi-controller"))
+		is_msi_controller = true;
+
+	return its_probe_one(res.start, resource_size(&res), parent,
+			    is_msi_controller, &node->fwnode);
+}
+
 static bool gic_rdists_supports_plpis(void)
 {
 	return !!(readl_relaxed(gic_data_rdist_rd_base() + GICR_TYPER) & GICR_TYPER_PLPIS);
@@ -1586,14 +1599,17 @@ static struct of_device_id its_device_id[] = {
 	{},
 };
 
-int __init its_init(struct device_node *node, struct rdists *rdists,
-	     struct irq_domain *parent_domain)
+int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
+		    struct irq_domain *parent_domain)
 {
-	struct device_node *np;
+	struct device_node *np, *of_node;
 
-	for (np = of_find_matching_node(node, its_device_id); np;
-	     np = of_find_matching_node(np, its_device_id)) {
-		its_probe(np, parent_domain);
+	of_node = to_of_node(handle);
+	if (of_node) {
+		for (np = of_find_matching_node(of_node, its_device_id); np;
+		     np = of_find_matching_node(np, its_device_id)) {
+			its_of_probe(np, parent_domain);
+		}
 	}
 
 	if (list_empty(&its_nodes)) {
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index dd16a60..995b7251 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -832,7 +832,6 @@ static int __init gic_init_bases(void __iomem *dist_base,
 				 u64 redist_stride,
 				 struct fwnode_handle *handle)
 {
-	struct device_node *node;
 	u32 typer;
 	int gic_irqs;
 	int err;
@@ -872,10 +871,9 @@ static int __init gic_init_bases(void __iomem *dist_base,
 
 	set_handle_irq(gic_handle_irq);
 
-	node = to_of_node(handle);
 	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() &&
-	    node) /* Temp hack to prevent ITS init for ACPI */
-		its_init(node, &gic_data.rdists, gic_data.domain);
+	    to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */
+		its_init(handle, &gic_data.rdists, gic_data.domain);
 
 	gic_smp_init();
 	gic_dist_init();
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index d5d798b..a40ed7d 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -332,7 +332,7 @@ struct rdists {
 struct irq_domain;
 struct device_node;
 int its_cpu_init(void);
-int its_init(struct device_node *node, struct rdists *rdists,
+int its_init(struct fwnode_handle *handle, struct rdists *rdists,
 	     struct irq_domain *domain);
 
 static inline bool gic_enable_sre(void)
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312212 — [PATCH V3 04/10] irqchip / GICv3: remove gic root node in ITS

From: Hanjun Guo <hanjun.guo@linaro.org>

The gic_root_node defined in ITS driver is not actually
used, and the ITS driver seems will not use it in the
future, so just remove it.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index e23d1d1..7ca7f9a 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -97,7 +97,6 @@ struct its_device {
 
 static LIST_HEAD(its_nodes);
 static DEFINE_SPINLOCK(its_lock);
-static struct device_node *gic_root_node;
 static struct rdists *gic_rdists;
 
 #define gic_data_rdist()		(raw_cpu_ptr(gic_rdists->rdist))
@@ -1602,8 +1601,6 @@ int its_init(struct device_node *node, struct rdists *rdists,
 	}
 
 	gic_rdists = rdists;
-	gic_root_node = node;
-
 	its_alloc_lpi_tables();
 	its_lpi_init(rdists->id_bits);
 
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312214 — [PATCH V3 01/10] irqchip / GICv3: Refactor gic_of_init() for GICv3 driver

Isolate hardware abstraction (FDT) code to gic_of_init().
Rest of the logic goes to gic_init_bases() and expects well
defined data to initialize GIC properly. The same solution
is used for GICv2 driver.

This is needed for ACPI initialization later.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3.c | 130 ++++++++++++++++++++++++++-----------------
 1 file changed, 78 insertions(+), 52 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index d7be6dd..31205c7 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -811,59 +811,16 @@ static void gicv3_enable_quirks(void)
 #endif
 }
 
-static int __init gic_of_init(struct device_node *node, struct device_node *parent)
+static int __init gic_init_bases(void __iomem *dist_base,
+				 struct redist_region *rdist_regs,
+				 u32 nr_redist_regions,
+				 u64 redist_stride,
+				 struct fwnode_handle *handle)
 {
-	void __iomem *dist_base;
-	struct redist_region *rdist_regs;
-	u64 redist_stride;
-	u32 nr_redist_regions;
+	struct device_node *node;
 	u32 typer;
-	u32 reg;
 	int gic_irqs;
 	int err;
-	int i;
-
-	dist_base = of_iomap(node, 0);
-	if (!dist_base) {
-		pr_err("%s: unable to map gic dist registers\n",
-			node->full_name);
-		return -ENXIO;
-	}
-
-	reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
-	if (reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4) {
-		pr_err("%s: no distributor detected, giving up\n",
-			node->full_name);
-		err = -ENODEV;
-		goto out_unmap_dist;
-	}
-
-	if (of_property_read_u32(node, "#redistributor-regions", &nr_redist_regions))
-		nr_redist_regions = 1;
-
-	rdist_regs = kzalloc(sizeof(*rdist_regs) * nr_redist_regions, GFP_KERNEL);
-	if (!rdist_regs) {
-		err = -ENOMEM;
-		goto out_unmap_dist;
-	}
-
-	for (i = 0; i < nr_redist_regions; i++) {
-		struct resource res;
-		int ret;
-
-		ret = of_address_to_resource(node, 1 + i, &res);
-		rdist_regs[i].redist_base = of_iomap(node, 1 + i);
-		if (ret || !rdist_regs[i].redist_base) {
-			pr_err("%s: couldn't map region %d\n",
-			       node->full_name, i);
-			err = -ENODEV;
-			goto out_unmap_rdist;
-		}
-		rdist_regs[i].phys_base = res.start;
-	}
-
-	if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
-		redist_stride = 0;
 
 	if (!is_hyp_mode_available())
 		static_key_slow_dec(&supports_deactivate);
@@ -889,8 +846,8 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 		gic_irqs = 1020;
 	gic_data.irq_nr = gic_irqs;
 
-	gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
-					      &gic_data);
+	gic_data.domain = irq_domain_create_tree(handle, &gic_irq_domain_ops,
+						 &gic_data);
 	gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist));
 
 	if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
@@ -900,7 +857,9 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 
 	set_handle_irq(gic_handle_irq);
 
-	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
+	node = to_of_node(handle);
+	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() &&
+	    node) /* Temp hack to prevent ITS init for ACPI */
 		its_init(node, &gic_data.rdists, gic_data.domain);
 
 	gic_smp_init();
@@ -914,6 +873,73 @@ out_free:
 	if (gic_data.domain)
 		irq_domain_remove(gic_data.domain);
 	free_percpu(gic_data.rdists.rdist);
+	return err;
+}
+
+static int __init gic_validate_dist_version(void __iomem *dist_base)
+{
+	u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+
+	if (reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *dist_base;
+	struct redist_region *rdist_regs;
+	u64 redist_stride;
+	u32 nr_redist_regions;
+	int err, i;
+
+	dist_base = of_iomap(node, 0);
+	if (!dist_base) {
+		pr_err("%s: unable to map gic dist registers\n",
+			node->full_name);
+		return -ENXIO;
+	}
+
+	err = gic_validate_dist_version(dist_base);
+	if (err) {
+		pr_err("%s: no distributor detected, giving up\n",
+			node->full_name);
+		goto out_unmap_dist;
+	}
+
+	if (of_property_read_u32(node, "#redistributor-regions", &nr_redist_regions))
+		nr_redist_regions = 1;
+
+	rdist_regs = kzalloc(sizeof(*rdist_regs) * nr_redist_regions, GFP_KERNEL);
+	if (!rdist_regs) {
+		err = -ENOMEM;
+		goto out_unmap_dist;
+	}
+
+	for (i = 0; i < nr_redist_regions; i++) {
+		struct resource res;
+		int ret;
+
+		ret = of_address_to_resource(node, 1 + i, &res);
+		rdist_regs[i].redist_base = of_iomap(node, 1 + i);
+		if (ret || !rdist_regs[i].redist_base) {
+			pr_err("%s: couldn't map region %d\n",
+			       node->full_name, i);
+			err = -ENODEV;
+			goto out_unmap_rdist;
+		}
+		rdist_regs[i].phys_base = res.start;
+	}
+
+	if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
+		redist_stride = 0;
+
+	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
+			     redist_stride, &node->fwnode);
+	if (!err)
+		return 0;
+
 out_unmap_rdist:
 	for (i = 0; i < nr_redist_regions; i++)
 		if (rdist_regs[i].redist_base)
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312215 — [PATCH V3 08/10] irqchip, gicv3, its: Probe ITS in the ACPI way.

Since we prepared ITS for being initialized different that via DT,
it is now possible to parse MADT and pass mandatory info to
firmware-agnostic ITS init call.

Note that we are using here IORT lib to keep track of allocated
domain handler which will be used to build PCI MSI domain on top
in the later patches.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 57 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index fecb7a6..42f378a 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -15,10 +15,13 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/iort.h>
 #include <linux/log2.h>
 #include <linux/mm.h>
 #include <linux/msi.h>
@@ -1272,6 +1275,11 @@ static int its_irq_gic_domain_alloc(struct irq_domain *domain,
 		fwspec.param[0] = GIC_IRQ_TYPE_LPI;
 		fwspec.param[1] = hwirq;
 		fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
+	} else if (is_fwnode_irqchip(domain->parent->fwnode)) {
+		fwspec.fwnode = domain->parent->fwnode;
+		fwspec.param_count = 2;
+		fwspec.param[0] = hwirq;
+		fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
 	} else {
 		return -EINVAL;
 	}
@@ -1594,6 +1602,52 @@ int its_cpu_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+
+#define ACPI_GICV3_ITS_MEM_SIZE (2 * SZ_64K)
+
+static struct irq_domain *its_parent __initdata;
+
+static int __init
+gic_acpi_parse_madt_its(struct acpi_subtable_header *header,
+			const unsigned long end)
+{
+	struct acpi_madt_generic_translator *its_entry;
+	struct fwnode_handle *domain_handle;
+	int err;
+
+	its_entry = (struct acpi_madt_generic_translator *)header;
+	domain_handle = irq_domain_alloc_fwnode((void *)its_entry->base_address);
+	if (!domain_handle) {
+		pr_err("Unable to allocate GICv2m domain token\n");
+		return -ENOMEM;
+	}
+
+	/* ITS works as msi controller in ACPI case */
+	err = its_probe_one(its_entry->base_address, ACPI_GICV3_ITS_MEM_SIZE,
+			    its_parent, true, domain_handle);
+	if (err) {
+		irq_domain_free_fwnode(domain_handle);
+		return err;
+	}
+	iort_register_domain_token(its_entry->translation_id, domain_handle);
+	return 0;
+}
+
+void __init its_acpi_probe(struct irq_domain *parent_domain)
+{
+	int count;
+
+	its_parent = parent_domain;
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
+				      gic_acpi_parse_madt_its, 0);
+	if (count <= 0)
+		pr_info("No valid GIC ITS entries exist\n");
+}
+#else
+static inline void __init its_acpi_probe(struct irq_domain *parent_domain) { }
+#endif
+
 static struct of_device_id its_device_id[] = {
 	{	.compatible	= "arm,gic-v3-its",	},
 	{},
@@ -1610,7 +1664,8 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
 		     np = of_find_matching_node(np, its_device_id)) {
 			its_of_probe(np, parent_domain);
 		}
-	}
+	} else
+		its_acpi_probe(parent_domain);
 
 	if (list_empty(&its_nodes)) {
 		pr_warn("ITS: No ITS available, not enabling LPIs\n");
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312216 — [PATCH V3 07/10] ARM64, ACPI, PCI: I/O Remapping Table (IORT) initial support.

IORT shows representation of IO topology for ARM based systems.
It describes how various components are connected together on
parent-child basis e.g. PCI RC -> SMMU -> ITS.

Initial support allows to:
- register ITS MSI chip along with ITS translation ID and domain token
- find registered domain token based on ITS translation ID
- find registered domain token corresponding to given PCI device
- find PCI device DeviceID based on its RequesterID

Additional features like:
- devices to SMMU binding
- finding platform device DeviceID based on its RequesterID
will be added in next series.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/acpi/Kconfig    |   3 +
 drivers/acpi/Makefile   |   1 +
 drivers/acpi/iort.c     | 326 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/irqchip/Kconfig |   1 +
 include/linux/iort.h    |  38 ++++++
 5 files changed, 369 insertions(+)
 create mode 100644 drivers/acpi/iort.c
 create mode 100644 include/linux/iort.h

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 5eef4cb..c3664be 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -57,6 +57,9 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT
 config ACPI_CCA_REQUIRED
 	bool
 
+config IORT_TABLE
+	bool
+
 config ACPI_DEBUGGER
 	bool "AML debugger interface (EXPERIMENTAL)"
 	select ACPI_DEBUG
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 675eaf3..96b3183 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
 obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_acpi.o
+obj-$(CONFIG_IORT_TABLE) 	+= iort.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o
diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c
new file mode 100644
index 0000000..13efc5f
--- /dev/null
+++ b/drivers/acpi/iort.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2015, Linaro Ltd.
+ *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * This file implements early detection/parsing of I/O mapping
+ * reported to OS through firmware via I/O Remapping Table (IORT)
+ * IORT document number: ARM DEN 0049A
+ */
+
+#define pr_fmt(fmt)	"ACPI: IORT: " fmt
+
+#include <linux/export.h>
+#include <linux/iort.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+struct iort_its_msi_chip {
+	struct list_head	list;
+	struct fwnode_handle	*fw_node;
+	u32			translation_id;
+};
+
+typedef acpi_status (*iort_find_node_callback)
+	(struct acpi_iort_node *node, void *context);
+
+/* Root pointer to the mapped IORT table */
+static struct acpi_table_header *iort_table;
+
+static LIST_HEAD(iort_msi_chip_list);
+
+/**
+ * iort_register_domain_token() - register domain token and related ITS ID
+ * 				  to the list from where we can get it back
+ * 				  later on.
+ * @translation_id: ITS ID
+ * @token: domain token
+ *
+ * Returns: 0 on success, -ENOMEM if not memory when allocating list element.
+ */
+int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node)
+{
+	struct iort_its_msi_chip *its_msi_chip;
+
+	its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL);
+	if (!its_msi_chip)
+		return -ENOMEM;
+
+	its_msi_chip->fw_node = fw_node;
+	its_msi_chip->translation_id = trans_id;
+
+	list_add(&its_msi_chip->list, &iort_msi_chip_list);
+	return 0;
+}
+
+/**
+ * iort_find_its_domain_token() - find domain token based on given ITS ID.
+ * @translation_id: ITS ID
+ *
+ * Returns: domain token when find on the list, NULL otherwise.
+ */
+struct fwnode_handle *iort_find_its_domain_token(int trans_id)
+{
+	struct iort_its_msi_chip *its_msi_chip;
+
+	list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) {
+		if (its_msi_chip->translation_id == trans_id)
+			return its_msi_chip->fw_node;
+	}
+
+	return NULL;
+}
+
+static struct acpi_iort_node *
+iort_scan_node(enum acpi_iort_node_type type,
+	       iort_find_node_callback callback, void *context)
+{
+	struct acpi_iort_node *iort_node, *iort_end;
+	struct acpi_table_iort *iort;
+	int i;
+
+	if (!iort_table)
+		return NULL;
+
+	/*
+	 * iort_table and iort both point to the start of IORT table, but
+	 * have different struct types
+	 */
+	iort = (struct acpi_table_iort *)iort_table;
+
+	/* Get the first IORT node */
+	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
+				 iort->node_offset);
+	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				iort_table->length);
+
+	for (i = 0; i < iort->node_count; i++) {
+		if (iort_node >= iort_end) {
+			pr_err("iort node pointer overflows, bad table\n");
+			return NULL;
+		}
+
+		if (iort_node->type == type) {
+			if (ACPI_SUCCESS(callback(iort_node, context)))
+				return iort_node;
+		}
+
+		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
+					 iort_node->length);
+	}
+
+	return NULL;
+}
+
+static struct acpi_iort_node *iort_find_parent_node(struct acpi_iort_node *node)
+{
+	struct acpi_iort_id_mapping *id;
+
+	if (!node || !node->mapping_offset || !node->mapping_count)
+		return NULL;
+
+	id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+			      node->mapping_offset);
+	/* Firmware bug! */
+	if (!id->output_reference) {
+		pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
+		       node, node->type);
+		return NULL;
+	}
+
+	node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+			    id->output_reference);
+	return node;
+}
+
+static acpi_status
+iort_find_dev_callback(struct acpi_iort_node *node, void *context)
+{
+	struct acpi_iort_root_complex *pci_rc;
+	struct device *dev = context;
+	struct pci_bus *bus;
+
+	switch (node->type) {
+	case ACPI_IORT_NODE_PCI_ROOT_COMPLEX:
+		bus = to_pci_bus(dev);
+		pci_rc = (struct acpi_iort_root_complex *)node->node_data;
+
+		/*
+		 * It is assumed that PCI segment numbers have a one-to-one
+		 * mapping with root complexes. Each segment number can
+		 * represent only one root complex.
+		 */
+		if (pci_rc->pci_segment_number == pci_domain_nr(bus))
+			return AE_OK;
+
+		break;
+	}
+
+	return AE_NOT_FOUND;
+}
+
+/**
+ * iort_pci_find_its_id() - find the ITS identifier based on specified device.
+ * @dev: device
+ * @idx: index of the ITS identifier list
+ * @its_id: ITS identifier
+ *
+ * Returns: 0 on success, appropriate error value otherwise
+ */
+static int
+iort_pci_find_its_id(struct device *dev, unsigned int idx, int *its_id)
+{
+	struct acpi_iort_its_group *its;
+	struct acpi_iort_node *node;
+
+	node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
+			      iort_find_dev_callback, dev);
+	if (!node) {
+		pr_err("can't find node related to %s device\n", dev_name(dev));
+		return -ENXIO;
+	}
+
+	/* Go upstream until find its parent ITS node */
+	while (node->type != ACPI_IORT_NODE_ITS_GROUP) {
+		node = iort_find_parent_node(node);
+		if (!node)
+			return -ENXIO;
+	}
+
+	/* Move to ITS specific data */
+	its = (struct acpi_iort_its_group *)node->node_data;
+	if (idx > its->its_count) {
+		pr_err("requested ITS ID index [%d] is greater than available ITS count [%d]\n",
+		       idx, its->its_count);
+		return -ENXIO;
+	}
+
+	*its_id = its->identifiers[idx];
+	return 0;
+}
+
+
+/**
+ * iort_find_pci_domain_token() - find registered domain token related to
+ * 				  PCI device
+ * @dev: device
+ *
+ * Returns: domain token on success, NULL otherwise
+ */
+struct fwnode_handle *iort_find_pci_domain_token(struct device *dev)
+{
+	static struct fwnode_handle *domain_handle;
+	int its_id;
+
+	if (iort_pci_find_its_id(dev, 0, &its_id))
+		return NULL;
+
+	domain_handle = iort_find_its_domain_token(its_id);
+	if (!domain_handle)
+		return NULL;
+
+	return domain_handle;
+}
+
+static int
+iort_translate_dev_to_devid(struct acpi_iort_node *node, u32 req_id,
+			    u32 *dev_id)
+{
+	u32 curr_id = req_id;
+
+	if (!node)
+		return -EINVAL;
+
+	/* Go upstream */
+	while (node->type != ACPI_IORT_NODE_ITS_GROUP) {
+		struct acpi_iort_id_mapping *id;
+		int i, found = 0;
+
+		/* Exit when no mapping array */
+		if (!node->mapping_offset || !node->mapping_count)
+			return -EINVAL;
+
+		id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+				  node->mapping_offset);
+
+		for (i = 0, found = 0; i < node->mapping_count; i++, id++) {
+			/*
+			 * Single mapping is not translation rule,
+			 * lets move on for this case
+			 */
+			if (id->flags & ACPI_IORT_ID_SINGLE_MAPPING)
+				continue;
+
+			if (curr_id < id->input_base ||
+			    (curr_id > id->input_base + id->id_count))
+				continue;
+
+			curr_id = id->output_base + (curr_id - id->input_base);
+			found = 1;
+			break;
+		}
+
+		if (!found)
+			return -ENXIO;
+
+		node = iort_find_parent_node(node);
+		if (!node)
+			return -ENXIO;
+	}
+
+	*dev_id = curr_id;
+	return 0;
+}
+
+/**
+ * iort_find_pci_id() - find PCI device ID based on requester ID
+ * @dev: device
+ * @req_id: requester ID
+ * @dev_id: device ID
+ *
+ * Returns: 0 on success, appropriate error value otherwise
+ */
+int iort_find_pci_id(struct pci_dev *pdev, u32 req_id, u32 *dev_id)
+{
+	struct pci_bus *bus = pdev->bus;
+	struct acpi_iort_node *node;
+	int err;
+
+	node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
+			      iort_find_dev_callback, &bus->dev);
+	if (!node) {
+		pr_err("can't find node related to %s device\n",
+		       dev_name(&pdev->dev));
+		return -ENXIO;
+	}
+
+	err = iort_translate_dev_to_devid(node, req_id, dev_id);
+	return err;
+}
+
+static int __init iort_table_detect(void)
+{
+	acpi_status status;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
+	if (ACPI_FAILURE(status)) {
+		const char *msg = acpi_format_exception(status);
+		pr_err("Failed to get table, %s\n", msg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+arch_initcall(iort_table_detect);
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4d7294e..90f00b1 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -26,6 +26,7 @@ config ARM_GIC_V3
 config ARM_GIC_V3_ITS
 	bool
 	select PCI_MSI_IRQ_DOMAIN
+	select IORT_TABLE if ACPI
 
 config ARM_NVIC
 	bool
diff --git a/include/linux/iort.h b/include/linux/iort.h
new file mode 100644
index 0000000..92cde45
--- /dev/null
+++ b/include/linux/iort.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015, Linaro Ltd.
+ *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef __IORT_H__
+#define __IORT_H__
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_IORT_TABLE
+
+struct fwnode_handle;
+
+int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node);
+struct fwnode_handle *iort_find_its_domain_token(int trans_id);
+struct fwnode_handle *iort_find_pci_domain_token(struct device *dev);
+int iort_find_pci_id(struct pci_dev *pdev, u32 req_id, u32 *dev_id);
+#else /* CONFIG_IORT_TABLE */
+static inline int
+iort_find_pci_id(struct pci_dev *pdev, u32 req_id, u32 *dev_id)
+{ return -ENXIO; }
+#endif /* CONFIG_IORT_TABLE */
+
+#endif /* __IORT_H__ */
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1312219 — [PATCH V3 03/10] irqchip,GICv3,ACPI: Add redistributor support via GICC structures.

Following ACPI spec:
On systems supporting GICv3 and above, GICR Base Address in MADT GICC
structure holds the 64-bit physical address of the associated Redistributor.
If all of the GIC Redistributors are in the always-on power domain,
GICR structures should be used to describe the Redistributors instead,
and this field must be set to 0.

It means that we have two ways to initialize registirbutors map.
1. via GICD structure which can accommodate many redistributors as a region
2. via GICC which is able to describe single redistributor

This patch is going to add support for second option.
Considering redistributors, GICD and GICC subtables have be mutually
exclusive. While discovering and mapping redistributor, we need to know
its size in advance. For the GICC case, redistributor can be in
a power-domain that is off, thus we cannot relay on GICR TYPER register.
Therefore, we get GIC version from distributor register and map 2xSZ_64K
for GICv3 and 4xSZ_64K for GICv4.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/irqchip/irq-gic-v3.c | 114 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 101 insertions(+), 13 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 2cada42..dd16a60 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -40,6 +40,7 @@
 struct redist_region {
 	void __iomem		*redist_base;
 	phys_addr_t		phys_base;
+	bool			single_redist;
 };
 
 struct gic_chip_data {
@@ -436,6 +437,9 @@ static int gic_populate_rdist(void)
 				return 0;
 			}
 
+			if (gic_data.redist_regions[i].single_redist)
+				break;
+
 			if (gic_data.redist_stride) {
 				ptr += gic_data.redist_stride;
 			} else {
@@ -964,8 +968,21 @@ out_unmap_dist:
 IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
 
 #ifdef CONFIG_ACPI
+static void __iomem *dist_base;
 static struct redist_region *redist_regs __initdata;
 static u32 nr_redist_regions __initdata;
+static bool single_redist;
+
+static void __init
+gic_acpi_register_redist(phys_addr_t phys_base, void __iomem *redist_base)
+{
+	static int count = 0;
+
+	redist_regs[count].phys_base = phys_base;
+	redist_regs[count].redist_base = redist_base;
+	redist_regs[count].single_redist = single_redist;
+	count++;
+}
 
 static int __init
 gic_acpi_parse_madt_redist(struct acpi_subtable_header *header,
@@ -974,7 +991,6 @@ gic_acpi_parse_madt_redist(struct acpi_subtable_header *header,
 	struct acpi_madt_generic_redistributor *redist =
 			(struct acpi_madt_generic_redistributor *)header;
 	void __iomem *redist_base;
-	static int count = 0;
 
 	redist_base = ioremap(redist->base_address, redist->length);
 	if (!redist_base) {
@@ -982,12 +998,49 @@ gic_acpi_parse_madt_redist(struct acpi_subtable_header *header,
 		return -ENOMEM;
 	}
 
-	redist_regs[count].phys_base = redist->base_address;
-	redist_regs[count].redist_base = redist_base;
-	count++;
+	gic_acpi_register_redist(redist->base_address, redist_base);
 	return 0;
 }
 
+static int __init
+gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
+			 const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *gicc =
+				(struct acpi_madt_generic_interrupt *)header;
+	u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+	u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
+	void __iomem *redist_base;
+
+	redist_base = ioremap(gicc->gicr_base_address, size);
+	if (!redist_base)
+		return -ENOMEM;
+
+	gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
+	return 0;
+}
+
+static int __init gic_acpi_collect_gicr_base(void)
+{
+	acpi_tbl_entry_handler redist_parser;
+	enum acpi_madt_type type;
+
+	if (single_redist) {
+		type = ACPI_MADT_TYPE_GENERIC_INTERRUPT;
+		redist_parser = gic_acpi_parse_madt_gicc;
+	} else {
+		type = ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR;
+		redist_parser = gic_acpi_parse_madt_redist;
+	}
+
+	/* Collect redistributor base addresses in GICR entries */
+	if (acpi_table_parse_madt(type, redist_parser, 0) > 0)
+		return 0;
+
+	pr_info("No valid GICR entries exist\n");
+	return -ENODEV;
+}
+
 static int __init gic_acpi_match_gicr(struct acpi_subtable_header *header,
 				  const unsigned long end)
 {
@@ -995,6 +1048,46 @@ static int __init gic_acpi_match_gicr(struct acpi_subtable_header *header,
 	return 0;
 }
 
+static int __init gic_acpi_match_gicc(struct acpi_subtable_header *header,
+				      const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *gicc =
+				(struct acpi_madt_generic_interrupt *)header;
+
+	/*
+	 * If GICC is enabled and has valid gicr base address, then it means
+	 * GICR base is presented via GICC
+	 */
+	if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address)
+		return 0;
+
+	return -ENODEV;
+}
+
+static int __init gic_acpi_count_gicr_regions(void)
+{
+	int count;
+
+	/*
+	 * Count how many redistributor regions we have. It is not allowed
+	 * to mix redistributor description, GICR and GICC subtables have to be
+	 * mutually exclusive.
+	 */
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
+				      gic_acpi_match_gicr, 0);
+	if (count > 0) {
+		single_redist = false;
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      gic_acpi_match_gicc, 0);
+	if (count > 0)
+		single_redist = true;
+
+	return count;
+}
+
 static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 					   struct acpi_probe_entry *ape)
 {
@@ -1006,8 +1099,7 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 		return false;
 
 	/* We need to do that exercise anyway, the sooner the better */
-	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
-				      gic_acpi_match_gicr, 0);
+	count = gic_acpi_count_gicr_regions();
 	if (count <= 0)
 		return false;
 
@@ -1022,8 +1114,7 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 {
 	struct acpi_madt_generic_distributor *dist;
 	struct fwnode_handle *domain_handle;
-	void __iomem *dist_base;
-	int i, err, count;
+	int i, err;
 
 	/* Get distributor base address */
 	dist = (struct acpi_madt_generic_distributor *)header;
@@ -1046,12 +1137,9 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 		goto out_dist_unmap;
 	}
 
-	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
-				      gic_acpi_parse_madt_redist, 0);
-	if (count <= 0) {
-		err = -ENODEV;
+	err = gic_acpi_collect_gicr_base();
+	if (err)
 		goto out_redist_unmap;
-	}
 
 	domain_handle = irq_domain_alloc_fwnode(dist_base);
 	if (!domain_handle) {
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1315314

On 01/19/16 08:11, Tomasz Nowicki wrote:
> Patches base on Suravee's ACPI GICv2m support:
> https://lkml.org/lkml/2015/12/10/475
> 
> The following git branch contains submitted patches along with
> the useful patches from the test point of view (mainly ACPI ARM64 PCI support).
> https://github.com/semihalf-nowicki-tomasz/linux.git (gicv3-its-acpi-v3)
> 
> Series has been tested on Cavium ThunderX server.

Thanks Tomasz. Looks good on my Qualcomm Technologies QDF2xxx server.

Tested-by: Christopher Covington <cov@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[toc] | [prev] | [next] | [standalone]

#1315465

On 19.01.16 14:11:13, Tomasz Nowicki wrote:
> Patches base on Suravee's ACPI GICv2m support:
> https://lkml.org/lkml/2015/12/10/475
> 
> The following git branch contains submitted patches along with
> the useful patches from the test point of view (mainly ACPI ARM64 PCI support).
> https://github.com/semihalf-nowicki-tomasz/linux.git (gicv3-its-acpi-v3)
> 
> Series has been tested on Cavium ThunderX server.
> 
> v2 -> v3
> - rebased on top of 4.4
> - fixes and improvements for redistributor init via GICC structures
> - fixes as per kbuild reports
> 
> v1 -> v2
> - rebased on top of 4.4-rc4
> - use pci_msi_domain_get_msi_rid for requester ID to device ID translation
> 
> Hanjun Guo (1):
>   irqchip / GICv3: remove gic root node in ITS
> 
> Tomasz Nowicki (9):
>   irqchip / GICv3: Refactor gic_of_init() for GICv3 driver
>   irqchip / GICv3: Add ACPI support for GICv3+ initialization
>   irqchip,GICv3,ACPI: Add redistributor support via GICC structures.
>   irqchip, gicv3, its: Mark its_init() and its children as __init
>   irqchip, GICv3, ITS: Refator ITS dt init code to prepare for ACPI.
>   ARM64, ACPI, PCI: I/O Remapping Table (IORT) initial support.
>   irqchip, gicv3, its: Probe ITS in the ACPI way.
>   acpi, gicv3, msi: Factor out code that might be reused for ACPI
>     equivalent.
>   acpi, gicv3, its: Use MADT ITS subtable to do PCI/MSI domain
>     initialization.
> 
>  drivers/acpi/Kconfig                     |   3 +
>  drivers/acpi/Makefile                    |   1 +
>  drivers/acpi/iort.c                      | 326 +++++++++++++++++++++++++++++
>  drivers/irqchip/Kconfig                  |   1 +
>  drivers/irqchip/irq-gic-v3-its-pci-msi.c |  85 ++++++--
>  drivers/irqchip/irq-gic-v3-its.c         | 143 +++++++++----
>  drivers/irqchip/irq-gic-v3.c             | 344 ++++++++++++++++++++++++++-----
>  drivers/pci/msi.c                        |   3 +
>  include/linux/iort.h                     |  38 ++++
>  include/linux/irqchip/arm-gic-v3.h       |   2 +-
>  10 files changed, 845 insertions(+), 101 deletions(-)
>  create mode 100644 drivers/acpi/iort.c
>  create mode 100644 include/linux/iort.h

Tested on various ThunderX single and dual node systems.

Tested-by: Robert Richter <rrichter@cavium.com>

Thanks Tomasz,

-Robert

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web