Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1315040 > unrolled thread
| Started by | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| First post | 2016-01-22 15:40 +0100 |
| Last post | 2016-01-22 18:10 +0100 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH] drm/vc4: Remove broken attempt at GPU reset using genpd. Guenter Roeck <linux@roeck-us.net> - 2016-01-22 15:40 +0100
Re: [PATCH] drm/vc4: Remove broken attempt at GPU reset using genpd. Sudip Mukherjee <sudipm.mukherjee@gmail.com> - 2016-01-22 18:00 +0100
Re: [PATCH] drm/vc4: Remove broken attempt at GPU reset using genpd. Guenter Roeck <linux@roeck-us.net> - 2016-01-22 18:10 +0100
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-01-22 15:40 +0100 |
| Subject | Re: [PATCH] drm/vc4: Remove broken attempt at GPU reset using genpd. |
| Message-ID | <qTL2z-5iq-29@gated-at.bofh.it> |
On Mon, Dec 21, 2015 at 06:08:44PM -0800, Eric Anholt wrote:
> I've tested and confirmed that it doesn't actually work. We'll need
> to sort out how to do this properly later, but for now just remove it
> since it also caused build breakage due to using CONFIG_PM_SLEEP
> functions without our Kconfig depending on PM_SLEEP.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
Still broken upstream.
FWIW:
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/gpu/drm/vc4/vc4_v3d.c | 17 +++++++----------
> 1 file changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c
> index 424d515..314ff71 100644
> --- a/drivers/gpu/drm/vc4/vc4_v3d.c
> +++ b/drivers/gpu/drm/vc4/vc4_v3d.c
> @@ -144,19 +144,16 @@ int vc4_v3d_debugfs_ident(struct seq_file *m, void *unused)
> }
> #endif /* CONFIG_DEBUG_FS */
>
> -/*
> - * Asks the firmware to turn on power to the V3D engine.
> - *
> - * This may be doable with just the clocks interface, though this
> - * packet does some other register setup from the firmware, too.
> - */
> int
> vc4_v3d_set_power(struct vc4_dev *vc4, bool on)
> {
> - if (on)
> - return pm_generic_poweroff(&vc4->v3d->pdev->dev);
> - else
> - return pm_generic_resume(&vc4->v3d->pdev->dev);
> + /* XXX: This interface is needed for GPU reset, and the way to
> + * do it is to turn our power domain off and back on. We
> + * can't just reset from within the driver, because the reset
> + * bits are in the power domain's register area, and get set
> + * during the poweron process.
> + */
> + return 0;
> }
>
> static void vc4_v3d_init_hw(struct drm_device *dev)
> --
> 2.6.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
[toc] | [next] | [standalone]
| From | Sudip Mukherjee <sudipm.mukherjee@gmail.com> |
|---|---|
| Date | 2016-01-22 18:00 +0100 |
| Message-ID | <qTNe2-6HG-1@gated-at.bofh.it> |
| In reply to | #1315040 |
On Friday 22 January 2016 08:01 PM, Guenter Roeck wrote: > On Mon, Dec 21, 2015 at 06:08:44PM -0800, Eric Anholt wrote: >> I've tested and confirmed that it doesn't actually work. We'll need >> to sort out how to do this properly later, but for now just remove it >> since it also caused build breakage due to using CONFIG_PM_SLEEP >> functions without our Kconfig depending on PM_SLEEP. >> >> Signed-off-by: Eric Anholt <eric@anholt.net> > > Still broken upstream. I saw Eric sending a pull request for it. But it was never pulled, maybe for the subject. Looks like rc1 will be broken for many arch. regards sudip
[toc] | [prev] | [next] | [standalone]
| From | Guenter Roeck <linux@roeck-us.net> |
|---|---|
| Date | 2016-01-22 18:10 +0100 |
| Message-ID | <qTNnJ-73X-13@gated-at.bofh.it> |
| In reply to | #1315129 |
On 01/22/2016 08:54 AM, Sudip Mukherjee wrote: > On Friday 22 January 2016 08:01 PM, Guenter Roeck wrote: >> On Mon, Dec 21, 2015 at 06:08:44PM -0800, Eric Anholt wrote: >>> I've tested and confirmed that it doesn't actually work. We'll need >>> to sort out how to do this properly later, but for now just remove it >>> since it also caused build breakage due to using CONFIG_PM_SLEEP >>> functions without our Kconfig depending on PM_SLEEP. >>> >>> Signed-off-by: Eric Anholt <eric@anholt.net> >> >> Still broken upstream. > > I saw Eric sending a pull request for it. But it was never pulled, maybe for the subject. > Looks like rc1 will be broken for many arch. > Could be worse. Essentially every allmodconfig/allyesconfig which doesn't configure pm is affected. With my tests (v4.4-10282-geae2177): Build results: total: 146 pass: 142 fail: 4 Failed builds: alpha:allmodconfig m68k:allmodconfig parisc:allmodconfig xtensa:allmodconfig Qemu test results: total: 96 pass: 94 fail: 2 Failed tests: arm64:smp:defconfig arm64:nosmp:defconfig arm64 qemu tests are broken for a different reason. There is a patch to fix it, but for some reason it didn't make it into mainline (yet). It is in -next, though. Guenter
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web