Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1310896 > unrolled thread

Re: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system

Started byFelipe Balbi <balbi@kernel.org>
First post2016-01-16 04:30 +0100
Last post2016-01-16 05:10 +0100
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system Felipe Balbi <balbi@kernel.org> - 2016-01-16 04:30 +0100
    Re: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system "Thang Q. Nguyen" <tqnguyen@apm.com> - 2016-01-16 05:10 +0100

#1310896 — Re: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system

FromFelipe Balbi <balbi@kernel.org>
Date2016-01-16 04:30 +0100
SubjectRe: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system
Message-ID<qRpIR-76j-5@gated-at.bofh.it>

[Multipart message — attachments visible in raw view] — view raw

Hi,

"Thang Q. Nguyen" <tqnguyen@apm.com> writes:
> Hi Balbi,
>
> On Thu, Jan 14, 2016 at 10:47 PM, Felipe Balbi <balbi@kernel.org> wrote:
>>
>>
>> Hi,
>>
>> "Thang Q. Nguyen" <tqnguyen@apm.com> writes:
>> > Add 64-bit DMA operation support to the USB DWC3 driver.
>> > First attempt to set the coherent DMA mask for 64-bit DMA.
>> > If that failed, attempt again with 32-bit DMA.
>> >
>> > Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
>> > ---
>> >  drivers/usb/dwc3/core.c | 15 +++++++++++++++
>> >  1 file changed, 15 insertions(+)
>> >
>> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> > index 22b47973..9818d6b 100644
>> > --- a/drivers/usb/dwc3/core.c
>> > +++ b/drivers/usb/dwc3/core.c
>> > @@ -829,6 +829,21 @@ static int dwc3_probe(struct platform_device *pdev)
>> >       dwc->mem = mem;
>> >       dwc->dev = dev;
>> >
>> > +     /* Try to set 64-bit DMA first */
>> > +     if (WARN_ON(!pdev->dev.dma_mask))
>>
>> why the WARN_ON() ?
>
> In my opinion, pdev->dev.dma_mask is expected to be set correctly. And

sure is, but a WARN_ON() will print out a stack dump, which looks
scary. Besides, if it's not set you're already fixing the problem.

> the issue happen just in case of DT boot and CONFIG_DMA_CMA=n, the
> pdev->dev.dma_mask value is not set. So, I set WARN_ON there to notify

why isn't it set ?

> that we expect pdev->dev.dma_mask set but not.

why don't you fix that case, instead ?

-- 
balbi

[toc] | [next] | [standalone]


#1310897

From"Thang Q. Nguyen" <tqnguyen@apm.com>
Date2016-01-16 05:10 +0100
Message-ID<qRqlA-7CU-7@gated-at.bofh.it>
In reply to#1310896
Hi Balbi,
Thanks for your review and feedback.
I will remove WARN_ON() as in your feedback. I will wait some days to
see if any more comments before sending out an updated patch.

Thanks,
Thang Q. Nguyen
On Sat, Jan 16, 2016 at 10:28 AM, Felipe Balbi <balbi@kernel.org> wrote:
>
> Hi,
>
> "Thang Q. Nguyen" <tqnguyen@apm.com> writes:
>> Hi Balbi,
>>
>> On Thu, Jan 14, 2016 at 10:47 PM, Felipe Balbi <balbi@kernel.org> wrote:
>>>
>>>
>>> Hi,
>>>
>>> "Thang Q. Nguyen" <tqnguyen@apm.com> writes:
>>> > Add 64-bit DMA operation support to the USB DWC3 driver.
>>> > First attempt to set the coherent DMA mask for 64-bit DMA.
>>> > If that failed, attempt again with 32-bit DMA.
>>> >
>>> > Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
>>> > ---
>>> >  drivers/usb/dwc3/core.c | 15 +++++++++++++++
>>> >  1 file changed, 15 insertions(+)
>>> >
>>> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>> > index 22b47973..9818d6b 100644
>>> > --- a/drivers/usb/dwc3/core.c
>>> > +++ b/drivers/usb/dwc3/core.c
>>> > @@ -829,6 +829,21 @@ static int dwc3_probe(struct platform_device *pdev)
>>> >       dwc->mem = mem;
>>> >       dwc->dev = dev;
>>> >
>>> > +     /* Try to set 64-bit DMA first */
>>> > +     if (WARN_ON(!pdev->dev.dma_mask))
>>>
>>> why the WARN_ON() ?
>>
>> In my opinion, pdev->dev.dma_mask is expected to be set correctly. And
>
> sure is, but a WARN_ON() will print out a stack dump, which looks
> scary. Besides, if it's not set you're already fixing the problem.
>
>> the issue happen just in case of DT boot and CONFIG_DMA_CMA=n, the
>> pdev->dev.dma_mask value is not set. So, I set WARN_ON there to notify
>
> why isn't it set ?
>
>> that we expect pdev->dev.dma_mask set but not.
>
> why don't you fix that case, instead ?
>
> --
> balbi



-- 

Thang Q. Nguyen    | Staff SW Eng.

C: +849.7684.7606 | O: +848.3770.0640

F: +848.3770.0641  | tqnguyen@apm.com

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web