Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1310090 > unrolled thread
| Started by | Matthias Brugger <matthias.bgg@gmail.com> |
|---|---|
| First post | 2016-01-15 14:10 +0100 |
| Last post | 2016-01-17 01:20 +0100 |
| Articles | 10 — 6 participants |
Back to article view | Back to linux.kernel
[PATCH 1/2] devicetree: bindings: Add vendor prefix for Tronsmart Matthias Brugger <matthias.bgg@gmail.com> - 2016-01-15 14:10 +0100
[PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Matthias Brugger <matthias.bgg@gmail.com> - 2016-01-15 14:10 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Javier Martinez Canillas <javier@dowhile0.org> - 2016-01-15 14:30 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Heiko Stuebner <heiko@sntech.de> - 2016-01-15 15:10 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Heiko Stuebner <heiko@sntech.de> - 2016-01-15 15:30 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Javier Martinez Canillas <javier@dowhile0.org> - 2016-01-15 16:40 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Javier Martinez Canillas <javier@dowhile0.org> - 2016-01-15 15:30 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Mark Rutland <mark.rutland@arm.com> - 2016-01-15 15:30 +0100
Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 Naoki FUKAUMI <naobsd@gmail.com> - 2016-01-16 02:30 +0100
Re: [PATCH 1/2] devicetree: bindings: Add vendor prefix for Tronsmart Rob Herring <robh@kernel.org> - 2016-01-17 01:20 +0100
| From | Matthias Brugger <matthias.bgg@gmail.com> |
|---|---|
| Date | 2016-01-15 14:10 +0100 |
| Subject | [PATCH 1/2] devicetree: bindings: Add vendor prefix for Tronsmart |
| Message-ID | <qRciB-6vV-9@gated-at.bofh.it> |
Tronsmart is a China based company building consumer electronic devices. Signed-off-by: Matthias Brugger <mbrugger@suse.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 55df1d4..f787742 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -231,6 +231,7 @@ toshiba Toshiba Corporation toumaz Toumaz tplink TP-LINK Technologies Co., Ltd. tronfy Tronfy +tronsmart Tronsmart truly Truly Semiconductors Limited upisemi uPI Semiconductor Corp. usi Universal Scientific Industrial Co., Ltd. -- 2.6.2
[toc] | [next] | [standalone]
| From | Matthias Brugger <matthias.bgg@gmail.com> |
|---|---|
| Date | 2016-01-15 14:10 +0100 |
| Subject | [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRciB-6vV-17@gated-at.bofh.it> |
| In reply to | #1310090 |
This patch adds basic support for the Tronsmart orion r86 set-top-box.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
---
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts | 370 +++++++++++++++++++++
3 files changed, 375 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 8e985dd..fa97d93 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -72,3 +72,7 @@ Rockchip platforms device tree bindings
- Rockchip R88 board:
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+
+- Tronsmart Orion R68
+ Required root node properties:
+ - compatible = "tronsmart,orion-r68", "rockchip,rk3368";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 601e6a2..950fe63 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
new file mode 100644
index 0000000..3f71d506
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
@@ -0,0 +1,370 @@
+/*
+ * Copyright (c) 2015 Matthias Brugger <mbrugger@suse.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+ model = "Rockchip Orion R68";
+ compatible = "tronsmart,orion-r68", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ button@0 {
+ gpio-key,wakeup = <1>;
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ label = "GPIO Power";
+ linux,code = <116>;
+ };
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+
+ work {
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ label = "orion:purple:led";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_ctl>;
+ default-state = "on";
+ };
+ };
+
+ vcc_18: vcc18-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* supplies both host and otg */
+ vcc_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vccio_sd: vcc-io-sd-regulator {
+ regulator-name= "vccio_sd";
+ gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_sd: vcc-sd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sd";
+ gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_io: vcc-io-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_lan: vcc-lan-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vccio_wl: vccio-wl-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_wl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vdd_10: vdd-10-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&emmc {
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio3 12 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <8000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ /* rtc_int is not connected */
+ };
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ emmc {
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+ <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ };
+
+ emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ };
+
+ emmc-cmd {
+ rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+ };
+
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ stby_pwren: stby-pwren {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ led_ctl: led-ctl {
+ rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_cd: sdmmc-cd {
+ rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&sdmmc {
+ clock-frequency = <50000000>;
+ clock-freq-min-max = <400000 50000000>;
+ cap-sd-highspeed;
+ supports-sd;
+ broken-cd;
+ card-detect-delay = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ bus-width = <4>;
+ num-slots = <1>;
+ ignore-pm-notify;
+ keep-power-in-suspend;
+
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.6.2
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@dowhile0.org> |
|---|---|
| Date | 2016-01-15 14:30 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRcBY-6DV-29@gated-at.bofh.it> |
| In reply to | #1310091 |
Hello Matthias,
This is not a complete review but I just wanted to comment on two
things that I noticed:
On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
<matthias.bgg@gmail.com> wrote:
[snip]
> + };
> +
> + vcc_18: vcc18-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + /* supplies both host and otg */
> + vcc_host: vcc-host-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&host_vbus_drv>;
> + regulator-name = "vcc_host";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vccio_sd: vcc-io-sd-regulator {
> + regulator-name= "vccio_sd";
> + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_sd: vcc-sd-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sd";
> + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_io: vcc-io-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_lan: vcc-lan-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_lan";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vccio_wl: vccio-wl-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vccio_wl";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vdd_10: vdd-10-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +};
There is only one regulator that is not marked as always-on. This will
prevent the regulator subsystem to disable unused regulators. Do you
really need all of them to be always-on?
> +
> +&emmc {
> + broken-cd;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + mmc-pwrseq = <&emmc_pwrseq>;
> + non-removable;
Non-removable assumes always present so there is no need for
broken-cd. In fact, these two properties are mutually exclusive
according to Documentation/devicetree/bindings/mmc/mmc.txt.
Best regards,
Javier
[toc] | [prev] | [next] | [standalone]
| From | Heiko Stuebner <heiko@sntech.de> |
|---|---|
| Date | 2016-01-15 15:10 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRdeH-7bt-33@gated-at.bofh.it> |
| In reply to | #1310107 |
Hi Javier,
Am Freitag, 15. Januar 2016, 10:28:44 schrieb Javier Martinez Canillas:
> This is not a complete review but I just wanted to comment on two
> things that I noticed:
same for me for now :-)
> On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
> <matthias.bgg@gmail.com> wrote:
>
> [snip]
>
> > + };
> > +
> > + vcc_18: vcc18-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_18";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_sys>;
> > + };
> > +
> > + /* supplies both host and otg */
> > + vcc_host: vcc-host-regulator {
> > + compatible = "regulator-fixed";
> > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&host_vbus_drv>;
> > + regulator-name = "vcc_host";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_sys>;
> > + };
> > +
> > + vccio_sd: vcc-io-sd-regulator {
> > + regulator-name= "vccio_sd";
> > + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + };
> > +
> > + vcc_sd: vcc-sd-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_sd";
> > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_io>;
> > + };
> > +
> > + vcc_io: vcc-io-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_io";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_sys>;
> > + };
> > +
> > + vcc_lan: vcc-lan-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_lan";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_io>;
> > + };
> > +
> > + vcc_sys: vcc-sys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_sys";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + vccio_wl: vccio-wl-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vccio_wl";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_io>;
> > + };
> > +
> > + vdd_10: vdd-10-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vdd_10";
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vin-supply = <&vcc_sys>;
> > + };
> > +};
>
> There is only one regulator that is not marked as always-on. This will
> prevent the regulator subsystem to disable unused regulators. Do you
> really need all of them to be always-on?
I do believe the regulators should be more or less correct. Sadly there are
no real schematics for that specific device available, but the reference
design for rk3368-based tv-boxes uses a hirarchy of hard-wired individual
regulators without any ability to control for most of them [aka always on].
And due to the r68 not sporting any different real pmic, I'd believe the
Orion will most likely also follow that scheme.
Heiko
[toc] | [prev] | [next] | [standalone]
| From | Heiko Stuebner <heiko@sntech.de> |
|---|---|
| Date | 2016-01-15 15:30 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRdy2-7l8-9@gated-at.bofh.it> |
| In reply to | #1310146 |
Am Freitag, 15. Januar 2016, 11:22:52 schrieb Javier Martinez Canillas:
> Hello Heiko,
>
> On Fri, Jan 15, 2016 at 11:03 AM, Heiko Stuebner <heiko@sntech.de> wrote:
> > Hi Javier,
> >
> > Am Freitag, 15. Januar 2016, 10:28:44 schrieb Javier Martinez Canillas:
> >> This is not a complete review but I just wanted to comment on two
> >
> >> things that I noticed:
> > same for me for now :-)
> >
> >> On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
> >> <matthias.bgg@gmail.com> wrote:
> >>
> >> [snip]
> >>
> >> > + };
> >> > +
> >> > + vcc_18: vcc18-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_18";
> >> > + regulator-min-microvolt = <1800000>;
> >> > + regulator-max-microvolt = <1800000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + /* supplies both host and otg */
> >> > + vcc_host: vcc-host-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
> >> > + pinctrl-names = "default";
> >> > + pinctrl-0 = <&host_vbus_drv>;
> >> > + regulator-name = "vcc_host";
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + vccio_sd: vcc-io-sd-regulator {
> >> > + regulator-name= "vccio_sd";
> >> > + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
that seems to be missing essential regulator properties
like a compatible.
> >> > + };
> >> > +
> >> > + vcc_sd: vcc-sd-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_sd";
> >> > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vcc_io: vcc-io-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_io";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + vcc_lan: vcc-lan-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_lan";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vcc_sys: vcc-sys-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_sys";
> >> > + regulator-min-microvolt = <5000000>;
> >> > + regulator-max-microvolt = <5000000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + };
> >> > +
> >> > + vccio_wl: vccio-wl-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vccio_wl";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vdd_10: vdd-10-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vdd_10";
> >> > + regulator-min-microvolt = <1000000>;
> >> > + regulator-max-microvolt = <1000000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +};
> >>
> >> There is only one regulator that is not marked as always-on. This will
> >> prevent the regulator subsystem to disable unused regulators. Do you
> >> really need all of them to be always-on?
> >
> > I do believe the regulators should be more or less correct. Sadly there
> > are no real schematics for that specific device available, but the
> > reference design for rk3368-based tv-boxes uses a hirarchy of
> > hard-wired individual regulators without any ability to control for
> > most of them [aka always on].
> >
> > And due to the r68 not sporting any different real pmic, I'd believe the
> > Orion will most likely also follow that scheme.
>
> I see, thanks a lot for the clarification. But then in that case I
> wonder what's the point of defining the gpio property in the fixed
> regulator device nodes?
the ones with gpio properties actually can be turned off - here they are the
different supplies for usb and sd-card only, so leaf-regulators without
further children.
Heiko
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@dowhile0.org> |
|---|---|
| Date | 2016-01-15 16:40 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qReDM-84a-27@gated-at.bofh.it> |
| In reply to | #1310154 |
Hello Heiko,
On Fri, Jan 15, 2016 at 11:26 AM, Heiko Stuebner <heiko@sntech.de> wrote:
> Am Freitag, 15. Januar 2016, 11:22:52 schrieb Javier Martinez Canillas:
>> Hello Heiko,
>>
>> On Fri, Jan 15, 2016 at 11:03 AM, Heiko Stuebner <heiko@sntech.de> wrote:
>> > Hi Javier,
>> >
>> > Am Freitag, 15. Januar 2016, 10:28:44 schrieb Javier Martinez Canillas:
>> >> This is not a complete review but I just wanted to comment on two
>> >
>> >> things that I noticed:
>> > same for me for now :-)
>> >
>> >> On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
>> >> <matthias.bgg@gmail.com> wrote:
>> >>
>> >> [snip]
>> >>
>> >> > + };
>> >> > +
>> >> > + vcc_18: vcc18-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vcc_18";
>> >> > + regulator-min-microvolt = <1800000>;
>> >> > + regulator-max-microvolt = <1800000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_sys>;
>> >> > + };
>> >> > +
>> >> > + /* supplies both host and otg */
>> >> > + vcc_host: vcc-host-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
>> >> > + pinctrl-names = "default";
>> >> > + pinctrl-0 = <&host_vbus_drv>;
>> >> > + regulator-name = "vcc_host";
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_sys>;
>> >> > + };
>> >> > +
>> >> > + vccio_sd: vcc-io-sd-regulator {
>> >> > + regulator-name= "vccio_sd";
>> >> > + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
>> >> > + regulator-min-microvolt = <3300000>;
>> >> > + regulator-max-microvolt = <3300000>;
>
> that seems to be missing essential regulator properties
> like a compatible.
>
Oh right, I missed that when first reading the patch.
>> >> > + };
>> >> > +
>> >> > + vcc_sd: vcc-sd-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vcc_sd";
>> >> > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
>> >> > + regulator-min-microvolt = <3300000>;
>> >> > + regulator-max-microvolt = <3300000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_io>;
>> >> > + };
>> >> > +
>> >> > + vcc_io: vcc-io-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vcc_io";
>> >> > + regulator-min-microvolt = <3300000>;
>> >> > + regulator-max-microvolt = <3300000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_sys>;
>> >> > + };
>> >> > +
>> >> > + vcc_lan: vcc-lan-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vcc_lan";
>> >> > + regulator-min-microvolt = <3300000>;
>> >> > + regulator-max-microvolt = <3300000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_io>;
>> >> > + };
>> >> > +
>> >> > + vcc_sys: vcc-sys-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vcc_sys";
>> >> > + regulator-min-microvolt = <5000000>;
>> >> > + regulator-max-microvolt = <5000000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + };
>> >> > +
>> >> > + vccio_wl: vccio-wl-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vccio_wl";
>> >> > + regulator-min-microvolt = <3300000>;
>> >> > + regulator-max-microvolt = <3300000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_io>;
>> >> > + };
>> >> > +
>> >> > + vdd_10: vdd-10-regulator {
>> >> > + compatible = "regulator-fixed";
>> >> > + regulator-name = "vdd_10";
>> >> > + regulator-min-microvolt = <1000000>;
>> >> > + regulator-max-microvolt = <1000000>;
>> >> > + regulator-always-on;
>> >> > + regulator-boot-on;
>> >> > + vin-supply = <&vcc_sys>;
>> >> > + };
>> >> > +};
>> >>
>> >> There is only one regulator that is not marked as always-on. This will
>> >> prevent the regulator subsystem to disable unused regulators. Do you
>> >> really need all of them to be always-on?
>> >
>> > I do believe the regulators should be more or less correct. Sadly there
>> > are no real schematics for that specific device available, but the
>> > reference design for rk3368-based tv-boxes uses a hirarchy of
>> > hard-wired individual regulators without any ability to control for
>> > most of them [aka always on].
>> >
>> > And due to the r68 not sporting any different real pmic, I'd believe the
>> > Orion will most likely also follow that scheme.
>>
>> I see, thanks a lot for the clarification. But then in that case I
>> wonder what's the point of defining the gpio property in the fixed
>> regulator device nodes?
>
> the ones with gpio properties actually can be turned off - here they are the
> different supplies for usb and sd-card only, so leaf-regulators without
> further children.
>
Ok, sorry I misunderstood and thought you were referring to all
regulators. I of course agree that regulators that can't be turned of
should be marked as always-on. I just asked this to be revisit and
only mark as always-on the ones that really should be.
>
> Heiko
Best regards,
Javier
[toc] | [prev] | [next] | [standalone]
| From | Javier Martinez Canillas <javier@dowhile0.org> |
|---|---|
| Date | 2016-01-15 15:30 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRdy2-7l8-11@gated-at.bofh.it> |
| In reply to | #1310146 |
Hello Heiko,
On Fri, Jan 15, 2016 at 11:03 AM, Heiko Stuebner <heiko@sntech.de> wrote:
> Hi Javier,
>
> Am Freitag, 15. Januar 2016, 10:28:44 schrieb Javier Martinez Canillas:
>> This is not a complete review but I just wanted to comment on two
>> things that I noticed:
>
> same for me for now :-)
>
>
>> On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
>> <matthias.bgg@gmail.com> wrote:
>>
>> [snip]
>>
>> > + };
>> > +
>> > + vcc_18: vcc18-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vcc_18";
>> > + regulator-min-microvolt = <1800000>;
>> > + regulator-max-microvolt = <1800000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_sys>;
>> > + };
>> > +
>> > + /* supplies both host and otg */
>> > + vcc_host: vcc-host-regulator {
>> > + compatible = "regulator-fixed";
>> > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&host_vbus_drv>;
>> > + regulator-name = "vcc_host";
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_sys>;
>> > + };
>> > +
>> > + vccio_sd: vcc-io-sd-regulator {
>> > + regulator-name= "vccio_sd";
>> > + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
>> > + regulator-min-microvolt = <3300000>;
>> > + regulator-max-microvolt = <3300000>;
>> > + };
>> > +
>> > + vcc_sd: vcc-sd-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vcc_sd";
>> > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
>> > + regulator-min-microvolt = <3300000>;
>> > + regulator-max-microvolt = <3300000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_io>;
>> > + };
>> > +
>> > + vcc_io: vcc-io-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vcc_io";
>> > + regulator-min-microvolt = <3300000>;
>> > + regulator-max-microvolt = <3300000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_sys>;
>> > + };
>> > +
>> > + vcc_lan: vcc-lan-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vcc_lan";
>> > + regulator-min-microvolt = <3300000>;
>> > + regulator-max-microvolt = <3300000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_io>;
>> > + };
>> > +
>> > + vcc_sys: vcc-sys-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vcc_sys";
>> > + regulator-min-microvolt = <5000000>;
>> > + regulator-max-microvolt = <5000000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + };
>> > +
>> > + vccio_wl: vccio-wl-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vccio_wl";
>> > + regulator-min-microvolt = <3300000>;
>> > + regulator-max-microvolt = <3300000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_io>;
>> > + };
>> > +
>> > + vdd_10: vdd-10-regulator {
>> > + compatible = "regulator-fixed";
>> > + regulator-name = "vdd_10";
>> > + regulator-min-microvolt = <1000000>;
>> > + regulator-max-microvolt = <1000000>;
>> > + regulator-always-on;
>> > + regulator-boot-on;
>> > + vin-supply = <&vcc_sys>;
>> > + };
>> > +};
>>
>> There is only one regulator that is not marked as always-on. This will
>> prevent the regulator subsystem to disable unused regulators. Do you
>> really need all of them to be always-on?
>
> I do believe the regulators should be more or less correct. Sadly there are
> no real schematics for that specific device available, but the reference
> design for rk3368-based tv-boxes uses a hirarchy of hard-wired individual
> regulators without any ability to control for most of them [aka always on].
>
> And due to the r68 not sporting any different real pmic, I'd believe the
> Orion will most likely also follow that scheme.
>
I see, thanks a lot for the clarification. But then in that case I
wonder what's the point of defining the gpio property in the fixed
regulator device nodes?
>
> Heiko
Best regards,
Javier
[toc] | [prev] | [next] | [standalone]
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Date | 2016-01-15 15:30 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRdy3-7l8-27@gated-at.bofh.it> |
| In reply to | #1310091 |
On Fri, Jan 15, 2016 at 02:06:32PM +0100, Matthias Brugger wrote:
> This patch adds basic support for the Tronsmart orion r86 set-top-box.
As far as I can tell, "Orion r68" is a family of products, for which the
"Meta" [1] and "Pro" [2] differ at least in the amount of RAM and flash,
and also appear to differ in wireless chipset (ap6335 for Meta, ap6212
for Pro).
Judging by the memory node I'm guessing this is for the "Pro".
This should be reflected in the model and compatible strings (in
addition to the commit message).
Thanks,
Mark.
[1] http://www.tronsmart.com/products/tronsmart-orion-r68-meta
[2] http://www.tronsmart.com/products/tronsmart-orion-r68-pro
>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> ---
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts | 370 +++++++++++++++++++++
> 3 files changed, 375 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 8e985dd..fa97d93 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -72,3 +72,7 @@ Rockchip platforms device tree bindings
> - Rockchip R88 board:
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
> +
> +- Tronsmart Orion R68
> + Required root node properties:
> + - compatible = "tronsmart,orion-r68", "rockchip,rk3368";
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 601e6a2..950fe63 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,4 +1,5 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
> new file mode 100644
> index 0000000..3f71d506
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
> @@ -0,0 +1,370 @@
> +/*
> + * Copyright (c) 2015 Matthias Brugger <mbrugger@suse.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
> +
> +/ {
> + model = "Rockchip Orion R68";
> + compatible = "tronsmart,orion-r68", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + pinctrl-0 = <&emmc_reset>;
> + pinctrl-names = "default";
> + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ext_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + clock-output-names = "ext_gmac";
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> +
> + button@0 {
> + gpio-key,wakeup = <1>;
> + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
> + label = "GPIO Power";
> + linux,code = <116>;
> + };
> + };
> +
> + leds: gpio-leds {
> + compatible = "gpio-leds";
> +
> + work {
> + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> + label = "orion:purple:led";
> + pinctrl-names = "default";
> + pinctrl-0 = <&led_ctl>;
> + default-state = "on";
> + };
> + };
> +
> + vcc_18: vcc18-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + /* supplies both host and otg */
> + vcc_host: vcc-host-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&host_vbus_drv>;
> + regulator-name = "vcc_host";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vccio_sd: vcc-io-sd-regulator {
> + regulator-name= "vccio_sd";
> + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_sd: vcc-sd-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sd";
> + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_io: vcc-io-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_lan: vcc-lan-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_lan";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_sys: vcc-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vccio_wl: vccio-wl-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vccio_wl";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vdd_10: vdd-10-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +};
> +
> +&emmc {
> + broken-cd;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + mmc-pwrseq = <&emmc_pwrseq>;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_MAC>;
> + assigned-clock-parents = <&ext_gmac>;
> + phy-supply = <&vcc_lan>;
> + phy-mode = "rgmii";
> + clock_in_out = "input";
> + snps,reset-gpio = <&gpio3 12 0>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 1000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + tx_delay = <0x30>;
> + rx_delay = <0x10>;
> + status = "ok";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + vdd_cpu: syr827@40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu";
> + regulator-enable-ramp-delay = <300>;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <8000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + hym8563: hym8563@51 {
> + compatible = "haoyu,hym8563";
> + reg = <0x51>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + /* rtc_int is not connected */
> + };
> +};
> +
> +&pinctrl {
> + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
> + bias-disable;
> + drive-strength = <8>;
> + };
> +
> + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
> + bias-pull-up;
> + drive-strength = <8>;
> + };
> +
> + emmc {
> + emmc_bus8: emmc-bus8 {
> + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
> + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
> + };
> +
> + emmc-clk {
> + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
> + };
> +
> + emmc-cmd {
> + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
> + };
> +
> + emmc_reset: emmc-reset {
> + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + leds {
> + stby_pwren: stby-pwren {
> + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + led_ctl: led-ctl {
> + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdmmc {
> + sdmmc_clk: sdmmc-clk {
> + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
> + };
> +
> + sdmmc_cmd: sdmmc-cmd {
> + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
> + };
> +
> + sdmmc_cd: sdmmc-cd {
> + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
> + };
> +
> + sdmmc_bus1: sdmmc-bus1 {
> + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
> + };
> +
> + sdmmc_bus4: sdmmc-bus4 {
> + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
> + <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
> + <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
> + <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
> + };
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&saradc {
> + vref-supply = <&vcc_18>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + clock-frequency = <50000000>;
> + clock-freq-min-max = <400000 50000000>;
> + cap-sd-highspeed;
> + supports-sd;
> + broken-cd;
> + card-detect-delay = <200>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> + bus-width = <4>;
> + num-slots = <1>;
> + ignore-pm-notify;
> + keep-power-in-suspend;
> +
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
> --
> 2.6.2
>
[toc] | [prev] | [next] | [standalone]
| From | Naoki FUKAUMI <naobsd@gmail.com> |
|---|---|
| Date | 2016-01-16 02:30 +0100 |
| Subject | Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68 |
| Message-ID | <qRnQL-5LG-51@gated-at.bofh.it> |
| In reply to | #1310091 |
Hi,
this is not full review.
On Fri, Jan 15, 2016 at 10:06 PM, Matthias Brugger
<matthias.bgg@gmail.com> wrote:
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 8e985dd..fa97d93 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -72,3 +72,7 @@ Rockchip platforms device tree bindings
> - Rockchip R88 board:
> Required root node properties:
> - compatible = "rockchip,r88", "rockchip,rk3368";
> +
> +- Tronsmart Orion R68
> + Required root node properties:
> + - compatible = "tronsmart,orion-r68", "rockchip,rk3368";
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
> new file mode 100644
> index 0000000..3f71d506
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68.dts
> @@ -0,0 +1,370 @@
> +/*
> + * Copyright (c) 2015 Matthias Brugger <mbrugger@suse.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3368.dtsi"
> +
> +/ {
> + model = "Rockchip Orion R68";
> + compatible = "tronsmart,orion-r68", "rockchip,rk3368";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
there are (at least) 4 models/revisions in Tronsmart Orion R68, Meta
or Pro, 100M or 1000M ethernet. probably there are more variants from
other vendors based on same board.
I don't say all variants need to be supported here now, but it may
need few more description.
I have Orion R68 Meta 1000M version. there is a label on the board,
"Netxeon RK68G V2.0 2G/16G/AP6335". it might be called
"netxeon,rk68g-v2.0" or something like that.
> + leds: gpio-leds {
> + compatible = "gpio-leds";
> +
> + work {
> + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> + label = "orion:purple:led";
> + pinctrl-names = "default";
> + pinctrl-0 = <&led_ctl>;
> + default-state = "on";
> + };
> + };
> + leds {
> + stby_pwren: stby-pwren {
> + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + led_ctl: led-ctl {
> + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
on my board, there is no "purple" LED, <&gpio3 29 GPIO_ACTIVE_HIGH> is
red LED, <&gpio0 12 GPIO_ACTIVE_HIGH> is blue LED.
did you already confirm all GPIO connection written in your dts?
> +&uart2 {
> + status = "okay";
> +};
uart4 is working for me. (as a console)
Regards,
--
FUKAUMI Naoki
[toc] | [prev] | [next] | [standalone]
| From | Rob Herring <robh@kernel.org> |
|---|---|
| Date | 2016-01-17 01:20 +0100 |
| Message-ID | <qRJex-3hR-7@gated-at.bofh.it> |
| In reply to | #1310090 |
On Fri, Jan 15, 2016 at 02:06:31PM +0100, Matthias Brugger wrote: > Tronsmart is a China based company building consumer electronic > devices. > > Signed-off-by: Matthias Brugger <mbrugger@suse.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh@kernel.org>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web