Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1311046 > unrolled thread

[PATCH v5 00/11] Earlycon cleanup

Started byPeter Hurley <peter@hurleysoftware.com>
First post2016-01-16 22:40 +0100
Last post2016-01-17 00:30 +0100
Articles 20 on this page of 27 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v5 00/11] Earlycon cleanup Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:40 +0100
    [PATCH v5 11/11] serial: 8250_omap: Add omap8250 earlycon Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:40 +0100
    [PATCH v5 06/11] of: earlycon: Move address translation to of_setup_earlycon() Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:40 +0100
      Re: [PATCH v5 06/11] of: earlycon: Move address translation to  of_setup_earlycon() kbuild test robot <lkp@intel.com> - 2016-01-16 23:10 +0100
    [PATCH v5 07/11] serial: earlycon: Common log banner for command line and DT Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:40 +0100
    [PATCH v5 01/11] earlycon: Use common framework for earlycon declarations Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 05/11] of: earlycon: Initialize port fields from DT properties Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
      Re: [PATCH v5 05/11] of: earlycon: Initialize port fields from DT  properties kbuild test robot <lkp@intel.com> - 2016-01-16 23:00 +0100
    [PATCH v5 02/11] serial: earlycon: Fixup earlycon console name and index Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 03/11] of: earlycon: Fixup earlycon console name and index Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 04/11] of: earlycon: Add options string handling Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 09/11] serial: 8250_early: Use port->regshift Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 08/11] serial: earlycon: Show the earlycon "driver" in banner Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v5 10/11] of: earlycon: Log more helpful message if stdout-path node not found Peter Hurley <peter@hurleysoftware.com> - 2016-01-16 22:50 +0100
    [PATCH v6 11/12] of: earlycon: Log more helpful message if stdout-path node not found Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
    [PATCH v6 05/12] of: earlycon: Add options string handling Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
    [PATCH v6 04/12] of: earlycon: Fixup earlycon console name and index Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
    [PATCH v6 09/12] serial: earlycon: Show the earlycon "driver" in banner Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
    [PATCH v6 00/12] Earlycon cleanup Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 02/12] earlycon: Use common framework for earlycon declarations Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 10/12] serial: 8250_early: Use port->regshift Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 07/12] of: earlycon: Move address translation to of_setup_earlycon() Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 01/12] of: earlycon: of_setup_earlycon() requires CONFIG_OF_EARLY_FLATTREE Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 03/12] serial: earlycon: Fixup earlycon console name and index Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 08/12] serial: earlycon: Common log banner for command line and DT Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 06/12] of: earlycon: Initialize port fields from DT properties Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100
      [PATCH v6 12/12] serial: 8250_omap: Add omap8250 earlycon Peter Hurley <peter@hurleysoftware.com> - 2016-01-17 00:30 +0100

Page 1 of 2  [1] 2  Next page →

#1311046 — [PATCH v5 00/11] Earlycon cleanup

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:40 +0100
Subject[PATCH v5 00/11] Earlycon cleanup
Message-ID<qRGJI-1Au-1@gated-at.bofh.it>
Hi Greg, Grant & Rob,

This patch series is a rebase of the v3 from April last year.

This patch series builds on my earlier "Extensible console matching &
direct earlycon" to add several useful features to earlycon:
* Proper port i/o configuration from DT node with of_serial properties
  (such as reg-io-width, reg-shift and reg-offset, and endianness)
* Proper console name & index initialization from earlycon name
  (for both command line and DT-defined earlycons)
* Support for DT 'stdout-path' options pass-through to earlycon setup
* Improved log messages for troubleshooting
* Support for multiple OF earlycon declarations so different
  compatible strings can specify the same OF earlycon

* Changes from v3
  - Added 32-bit big-endian support
  - Removed the omap8250 earlycon (will follow later)
* Changes from v4
  - Rolled in Rob's acks (thanks for reviewing this series)
  - Removed the conditional guard of of_fdt.h header inclusion (Rob's comment)
  - Left in the omap8250 earlycon (rebased w/o the wip so applies cleanly)

Regards,

Peter Hurley (11):
  earlycon: Use common framework for earlycon declarations
  serial: earlycon: Fixup earlycon console name and index
  of: earlycon: Fixup earlycon console name and index
  of: earlycon: Add options string handling
  of: earlycon: Initialize port fields from DT properties
  of: earlycon: Move address translation to of_setup_earlycon()
  serial: earlycon: Common log banner for command line and DT
  serial: earlycon: Show the earlycon "driver" in banner
  serial: 8250_early: Use port->regshift
  of: earlycon: Log more helpful message if stdout-path node not found
  serial: 8250_omap: Add omap8250 earlycon

 drivers/of/fdt.c                     |  32 +++++-----
 drivers/of/fdt_address.c             |  11 +++-
 drivers/tty/serial/8250/8250_early.c |  37 ++++++++++--
 drivers/tty/serial/amba-pl011.c      |   1 -
 drivers/tty/serial/arc_uart.c        |   1 -
 drivers/tty/serial/earlycon.c        | 114 ++++++++++++++++++++++++++---------
 drivers/tty/serial/msm_serial.c      |   2 -
 drivers/tty/serial/samsung.c         |   6 --
 drivers/tty/serial/sprd_serial.c     |   2 -
 include/asm-generic/vmlinux.lds.h    |   6 +-
 include/linux/of_fdt.h               |   2 +-
 include/linux/serial_core.h          |  25 +++++---
 12 files changed, 158 insertions(+), 81 deletions(-)

-- 
2.7.0

[toc] | [next] | [standalone]

#1311047 — [PATCH v5 11/11] serial: 8250_omap: Add omap8250 earlycon

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:40 +0100
Subject[PATCH v5 11/11] serial: 8250_omap: Add omap8250 earlycon
Message-ID<qRGJI-1Au-5@gated-at.bofh.it>
In reply to#1311046
Add DT earlycon for 8250_omap driver. This boot console is included
for kernels built with CONFIG_SERIAL_EARLYCON=y, CONFIG_OF=y,
CONFIG_SERIAL_8250_OMAP=y, and CONFIG_OF_EARLY_FLATTREE=y.

This boot console is enabled with the command line option "earlycon"
(without "=<name>...") when the DT 'stdout-path' property matches a
compatible uart. For example,

/ {
   chosen {
        stdout-path = "serial0:115200";
   };

   ....

   aliases {
        serial0 = &uart0;
   };

   ....

   ocp : ocp {
        uart0 : serial@44e09000 {
             compatible = "ti,omap3-uart";
        }
   };
};

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/8250/8250_early.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 180143c..3b3dbdc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -149,3 +149,24 @@ EARLYCON_DECLARE(uart8250, early_serial8250_setup);
 EARLYCON_DECLARE(uart, early_serial8250_setup);
 OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
 OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
+
+#ifdef CONFIG_SERIAL_8250_OMAP
+
+static int __init early_omap8250_setup(struct earlycon_device *device,
+				       const char *options)
+{
+	struct uart_port *port = &device->port;
+
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+
+	port->regshift = 2;
+	device->con->write = early_serial8250_write;
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+
+#endif
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311048 — [PATCH v5 06/11] of: earlycon: Move address translation to of_setup_earlycon()

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:40 +0100
Subject[PATCH v5 06/11] of: earlycon: Move address translation to of_setup_earlycon()
Message-ID<qRGJI-1Au-7@gated-at.bofh.it>
In reply to#1311046
Cleanup the early DT/earlycon separation; remove the 'addr' parameter
from of_setup_earlycon() and get the uart phys addr directly with a
new wrapper function, of_flat_dt_translate_addr(). Limit
fdt_translate_address() to file scope.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              |  8 +-------
 drivers/of/fdt_address.c      | 11 ++++++++++-
 drivers/tty/serial/earlycon.c | 12 +++++++++---
 include/linux/of_fdt.h        |  2 +-
 include/linux/serial_core.h   |  2 +-
 5 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index e8fd54a..918809e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -827,19 +827,13 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		return -ENODEV;
 
 	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
-		u64 addr;
-
 		if (!match->compatible[0])
 			continue;
 
 		if (fdt_node_check_compatible(fdt, offset, match->compatible))
 			continue;
 
-		addr = fdt_translate_address(fdt, offset);
-		if (addr == OF_BAD_ADDR)
-			return -ENXIO;
-
-		of_setup_earlycon(addr, match, offset, options);
+		of_setup_earlycon(match, offset, options);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c
index 8d3dc6f..dca8f9b 100644
--- a/drivers/of/fdt_address.c
+++ b/drivers/of/fdt_address.c
@@ -161,7 +161,7 @@ static int __init fdt_translate_one(const void *blob, int parent,
  * that can be mapped to a cpu physical address). This is not really specified
  * that way, but this is traditionally the way IBM at least do things
  */
-u64 __init fdt_translate_address(const void *blob, int node_offset)
+static u64 __init fdt_translate_address(const void *blob, int node_offset)
 {
 	int parent, len;
 	const struct of_bus *bus, *pbus;
@@ -239,3 +239,12 @@ u64 __init fdt_translate_address(const void *blob, int node_offset)
  bail:
 	return result;
 }
+
+/**
+ * of_flat_dt_translate_address - translate DT addr into CPU phys addr
+ * @node: node in the flat blob
+ */
+u64 __init of_flat_dt_translate_address(unsigned long node)
+{
+	return fdt_translate_address(initial_boot_params, node);
+}
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 75679b0..24f9adb 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/sizes.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 
 #ifdef CONFIG_FIX_EARLYCON_MEM
@@ -216,8 +217,7 @@ static int __init param_setup_earlycon(char *buf)
 }
 early_param("earlycon", param_setup_earlycon);
 
-int __init of_setup_earlycon(unsigned long addr,
-			     const struct earlycon_id *match,
+int __init of_setup_earlycon(const struct earlycon_id *match,
 			     unsigned long node,
 			     const char *options)
 {
@@ -225,12 +225,18 @@ int __init of_setup_earlycon(unsigned long addr,
 	struct uart_port *port = &early_console_dev.port;
 	const __be32 *val;
 	bool big_endian;
+	u64 addr;
 
 	spin_lock_init(&port->lock);
 	port->iotype = UPIO_MEM;
+	addr = of_flat_dt_translate_address(node);
+	if (addr == OF_BAD_ADDR) {
+		pr_warn("[%s] bad address\n", match->name);
+		return -ENXIO;
+	}
 	port->mapbase = addr;
 	port->uartclk = BASE_BAUD * 16;
-	port->membase = earlycon_map(addr, SZ_4K);
+	port->membase = earlycon_map(port->mapbase, SZ_4K);
 
 	val = of_get_flat_dt_prop(node, "reg-offset", NULL);
 	if (val)
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index df9ef38..2fbe868 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -88,7 +88,7 @@ extern void unflatten_device_tree(void);
 extern void unflatten_and_copy_device_tree(void);
 extern void early_init_devtree(void *);
 extern void early_get_first_memblock_info(void *, phys_addr_t *);
-extern u64 fdt_translate_address(const void *blob, int node_offset);
+extern u64 of_flat_dt_translate_address(unsigned long node);
 extern void of_fdt_limit_memory(int limit);
 #else /* CONFIG_OF_FLATTREE */
 static inline void early_init_fdt_scan_reserved_mem(void) {}
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6d1bed8..cbfcf38 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -359,7 +359,7 @@ extern const struct earlycon_id __earlycon_table_end[];
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
 extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match,
+extern int of_setup_earlycon(const struct earlycon_id *match,
 			     unsigned long node,
 			     const char *options);
 
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311061 — Re: [PATCH v5 06/11] of: earlycon: Move address translation to of_setup_earlycon()

Fromkbuild test robot <lkp@intel.com>
Date2016-01-16 23:10 +0100
SubjectRe: [PATCH v5 06/11] of: earlycon: Move address translation to of_setup_earlycon()
Message-ID<qRHcK-21m-5@gated-at.bofh.it>
In reply to#1311048

[Multipart message — attachments visible in raw view] — view raw

Hi Peter,

[auto build test ERROR on tty/tty-testing]
[also build test ERROR on v4.4 next-20160115]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Peter-Hurley/Earlycon-cleanup/20160117-054602
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
config: x86_64-randconfig-x012-201603 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/tty/serial/earlycon.c: In function 'of_setup_earlycon':
>> drivers/tty/serial/earlycon.c:232:9: error: implicit declaration of function 'of_flat_dt_translate_address' [-Werror=implicit-function-declaration]
     addr = of_flat_dt_translate_address(node);
            ^
   drivers/tty/serial/earlycon.c:241:8: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
     val = of_get_flat_dt_prop(node, "reg-offset", NULL);
           ^
   drivers/tty/serial/earlycon.c:241:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-offset", NULL);
         ^
   drivers/tty/serial/earlycon.c:244:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-shift", NULL);
         ^
   drivers/tty/serial/earlycon.c:247:61: warning: comparison between pointer and integer
     big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
                                                                ^
   drivers/tty/serial/earlycon.c:249:53: warning: comparison between pointer and integer
       of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
                                                        ^
   drivers/tty/serial/earlycon.c:250:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
         ^
   cc1: some warnings being treated as errors

vim +/of_flat_dt_translate_address +232 drivers/tty/serial/earlycon.c

   226		const __be32 *val;
   227		bool big_endian;
   228		u64 addr;
   229	
   230		spin_lock_init(&port->lock);
   231		port->iotype = UPIO_MEM;
 > 232		addr = of_flat_dt_translate_address(node);
   233		if (addr == OF_BAD_ADDR) {
   234			pr_warn("[%s] bad address\n", match->name);
   235			return -ENXIO;

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[toc] | [prev] | [next] | [standalone]

#1311049 — [PATCH v5 07/11] serial: earlycon: Common log banner for command line and DT

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:40 +0100
Subject[PATCH v5 07/11] serial: earlycon: Common log banner for command line and DT
Message-ID<qRGJI-1Au-9@gated-at.bofh.it>
In reply to#1311046
Refactor the command line earlycon banner into earlycon_init() so
both earlycon startup methods output an info banner.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/earlycon.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 24f9adb..ff22200 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -59,6 +59,7 @@ static void __init earlycon_init(struct earlycon_device *device,
 				 const char *name)
 {
 	struct console *earlycon = device->con;
+	struct uart_port *port = &device->port;
 	const char *s;
 	size_t len;
 
@@ -72,6 +73,19 @@ static void __init earlycon_init(struct earlycon_device *device,
 	len = s - name;
 	strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name)));
 	earlycon->data = &early_console_dev;
+
+	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
+	    port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
+		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+			(port->iotype == UPIO_MEM) ? "" :
+			(port->iotype == UPIO_MEM16) ? "16" :
+			(port->iotype == UPIO_MEM32) ? "32" : "32be",
+			(unsigned long long)port->mapbase,
+			device->options);
+	else
+		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
+			port->iobase,
+			device->options);
 }
 
 static int __init parse_options(struct earlycon_device *device, char *options)
@@ -110,19 +124,6 @@ static int __init parse_options(struct earlycon_device *device, char *options)
 		strlcpy(device->options, options, length);
 	}
 
-	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
-	    port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
-		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
-			(port->iotype == UPIO_MEM) ? "" :
-			(port->iotype == UPIO_MEM16) ? "16" :
-			(port->iotype == UPIO_MEM32) ? "32" : "32be",
-			(unsigned long long)port->mapbase,
-			device->options);
-	else
-		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
-
 	return 0;
 }
 
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311050 — [PATCH v5 01/11] earlycon: Use common framework for earlycon declarations

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 01/11] earlycon: Use common framework for earlycon declarations
Message-ID<qRGTn-1Ej-1@gated-at.bofh.it>
In reply to#1311046
Use a single common table of struct earlycon_id for both command line
and devicetree. Re-define OF_EARLYCON_DECLARE() macro to instance a
unique earlycon declaration (the declaration is only guaranteed to be
unique within a compilation unit; separate compilation units must still
use unique earlycon names).

The semantics of OF_EARLYCON_DECLARE() is different; it declares an
earlycon which can matched either on the command line or by devicetree.
EARLYCON_DECLARE() is semantically unchanged; it declares an earlycon
which is matched by command line only. Remove redundant instances of
EARLYCON_DECLARE().

This enables all earlycons to properly initialize struct console
with the appropriate name and index, which improves diagnostics and
enables direct earlycon-to-console handoff.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c                  | 14 +++++++-------
 drivers/tty/serial/amba-pl011.c   |  1 -
 drivers/tty/serial/arc_uart.c     |  1 -
 drivers/tty/serial/earlycon.c     | 10 +---------
 drivers/tty/serial/msm_serial.c   |  2 --
 drivers/tty/serial/samsung.c      |  6 ------
 drivers/tty/serial/sprd_serial.c  |  2 --
 include/asm-generic/vmlinux.lds.h |  6 ++----
 include/linux/serial_core.h       | 22 +++++++++++++---------
 9 files changed, 23 insertions(+), 41 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 655f79d..1686118 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -796,14 +796,13 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_SERIAL_EARLYCON
-extern struct of_device_id __earlycon_of_table[];
 
 static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
 	const char *p;
 	int l;
-	const struct of_device_id *match = __earlycon_of_table;
+	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
 
 	offset = fdt_path_offset(fdt, "/chosen");
@@ -826,19 +825,20 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (offset < 0)
 		return -ENODEV;
 
-	while (match->compatible[0]) {
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		u64 addr;
 
-		if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
-			match++;
+		if (!match->compatible[0])
+			continue;
+
+		if (fdt_node_check_compatible(fdt, offset, match->compatible))
 			continue;
-		}
 
 		addr = fdt_translate_address(fdt, offset);
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match->data);
+		of_setup_earlycon(addr, match->setup);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c0da0cc..de84602 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2327,7 +2327,6 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 	device->con->write = pl011_early_write;
 	return 0;
 }
-EARLYCON_DECLARE(pl011, pl011_early_console_setup);
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
 
 #else
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 03ebe40..3a1de5c 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -576,7 +576,6 @@ static int __init arc_early_console_setup(struct earlycon_device *dev,
 	dev->con->write = arc_early_serial_write;
 	return 0;
 }
-EARLYCON_DECLARE(arc_uart, arc_early_console_setup);
 OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup);
 
 #endif	/* CONFIG_SERIAL_ARC_CONSOLE */
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 3f24236..765bce6 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/sizes.h>
-#include <linux/mod_devicetable.h>
 
 #ifdef CONFIG_FIX_EARLYCON_MEM
 #include <asm/fixmap.h>
@@ -37,13 +36,6 @@ static struct earlycon_device early_console_dev = {
 	.con = &early_con,
 };
 
-extern struct earlycon_id __earlycon_table[];
-static const struct earlycon_id __earlycon_table_sentinel
-	__used __section(__earlycon_table_end);
-
-static const struct of_device_id __earlycon_of_table_sentinel
-	__used __section(__earlycon_of_table_end);
-
 static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
 {
 	void __iomem *base;
@@ -166,7 +158,7 @@ int __init setup_earlycon(char *buf)
 	if (early_con.flags & CON_ENABLED)
 		return -EALREADY;
 
-	for (match = __earlycon_table; match->name[0]; match++) {
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		size_t len = strlen(match->name);
 
 		if (strncmp(buf, match->name, len))
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index dcde955..96d3ce8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1478,7 +1478,6 @@ msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
 	device->con->write = msm_serial_early_write;
 	return 0;
 }
-EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup);
 OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
 		    msm_serial_early_console_setup);
 
@@ -1500,7 +1499,6 @@ msm_serial_early_console_setup_dm(struct earlycon_device *device,
 	device->con->write = msm_serial_early_write_dm;
 	return 0;
 }
-EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm);
 OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
 		    msm_serial_early_console_setup_dm);
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d72cd73..fd9c47f 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -2451,7 +2451,6 @@ static int __init s3c2410_early_console_setup(struct earlycon_device *device,
 }
 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
 			s3c2410_early_console_setup);
-EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
 
 /* S3C2412, S3C2440, S3C64xx */
 static struct samsung_early_console_data s3c2440_early_console_data = {
@@ -2470,9 +2469,6 @@ OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
 			s3c2440_early_console_setup);
 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
 			s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
 
 /* S5PV210, EXYNOS */
 static struct samsung_early_console_data s5pv210_early_console_data = {
@@ -2489,8 +2485,6 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
 			s5pv210_early_console_setup);
 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
 			s5pv210_early_console_setup);
-EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
-EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
 #endif
 
 MODULE_ALIAS("platform:samsung-uart");
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index ef26c4a..1897106 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -624,8 +624,6 @@ static int __init sprd_early_console_setup(
 	device->con->write = sprd_early_write;
 	return 0;
 }
-
-EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
 OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
 		    sprd_early_console_setup);
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c4bd0e2..e9a81a6 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -157,7 +157,7 @@
 #define EARLYCON_TABLE() STRUCT_ALIGN();			\
 			 VMLINUX_SYMBOL(__earlycon_table) = .;	\
 			 *(__earlycon_table)			\
-			 *(__earlycon_table_end)
+			 VMLINUX_SYMBOL(__earlycon_table_end) = .;
 #else
 #define EARLYCON_TABLE()
 #endif
@@ -179,7 +179,6 @@
 #define RESERVEDMEM_OF_TABLES()	OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
 #define CPU_METHOD_OF_TABLES()	OF_TABLE(CONFIG_SMP, cpu_method)
 #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
-#define EARLYCON_OF_TABLES()	OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon)
 
 #ifdef CONFIG_ACPI
 #define ACPI_PROBE_TABLE(name)						\
@@ -526,8 +525,7 @@
 	IRQCHIP_OF_MATCH_TABLE()					\
 	ACPI_PROBE_TABLE(irqchip)					\
 	ACPI_PROBE_TABLE(clksrc)					\
-	EARLYCON_TABLE()						\
-	EARLYCON_OF_TABLES()
+	EARLYCON_TABLE()
 
 #define INIT_TEXT							\
 	*(.init.text)							\
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index e03d6ba..25e0514 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -342,22 +342,26 @@ struct earlycon_device {
 
 struct earlycon_id {
 	char	name[16];
+	char	compatible[128];
 	int	(*setup)(struct earlycon_device *, const char *options);
 } __aligned(32);
 
+extern const struct earlycon_id __earlycon_table[];
+extern const struct earlycon_id __earlycon_table_end[];
+
+#define OF_EARLYCON_DECLARE(_name, compat, fn)				\
+	static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name)	\
+	     __used __section(__earlycon_table)				\
+		= { .name = __stringify(_name),				\
+		    .compatible = compat,				\
+		    .setup = fn  }
+
+#define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
+
 extern int setup_earlycon(char *buf);
 extern int of_setup_earlycon(unsigned long addr,
 			     int (*setup)(struct earlycon_device *, const char *));
 
-#define EARLYCON_DECLARE(_name, func)					\
-	static const struct earlycon_id __earlycon_##_name		\
-		__used __section(__earlycon_table)			\
-		 = { .name  = __stringify(_name),			\
-		     .setup = func  }
-
-#define OF_EARLYCON_DECLARE(name, compat, fn)				\
-	_OF_DECLARE(earlycon, name, compat, fn, void *)
-
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
 int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311051 — [PATCH v5 05/11] of: earlycon: Initialize port fields from DT properties

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 05/11] of: earlycon: Initialize port fields from DT properties
Message-ID<qRGTn-1Ej-3@gated-at.bofh.it>
In reply to#1311046
Read the optional "reg-offset", "reg-shift", "reg-io-width" and endianness
properties and initialize the respective struct uart_port field if found.

NB: These bindings are common to several drivers and the values merely
indicate the default value; the registering earlycon setup() method can
simply override the values if required.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              |  2 +-
 drivers/tty/serial/earlycon.c | 31 +++++++++++++++++++++++++++++++
 include/linux/serial_core.h   |  1 +
 3 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index cfd3b35..e8fd54a 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -839,7 +839,7 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match, options);
+		of_setup_earlycon(addr, match, offset, options);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index d50ed78..75679b0 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/sizes.h>
+#include <linux/of_fdt.h>
 
 #ifdef CONFIG_FIX_EARLYCON_MEM
 #include <asm/fixmap.h>
@@ -217,10 +218,13 @@ early_param("earlycon", param_setup_earlycon);
 
 int __init of_setup_earlycon(unsigned long addr,
 			     const struct earlycon_id *match,
+			     unsigned long node,
 			     const char *options)
 {
 	int err;
 	struct uart_port *port = &early_console_dev.port;
+	const __be32 *val;
+	bool big_endian;
 
 	spin_lock_init(&port->lock);
 	port->iotype = UPIO_MEM;
@@ -228,6 +232,33 @@ int __init of_setup_earlycon(unsigned long addr,
 	port->uartclk = BASE_BAUD * 16;
 	port->membase = earlycon_map(addr, SZ_4K);
 
+	val = of_get_flat_dt_prop(node, "reg-offset", NULL);
+	if (val)
+		port->mapbase += be32_to_cpu(*val);
+	val = of_get_flat_dt_prop(node, "reg-shift", NULL);
+	if (val)
+		port->regshift = be32_to_cpu(*val);
+	big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
+		(IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) &&
+		 of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
+	val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
+	if (val) {
+		switch (be32_to_cpu(*val)) {
+		case 1:
+			port->iotype = UPIO_MEM;
+			break;
+		case 2:
+			port->iotype = UPIO_MEM16;
+			break;
+		case 4:
+			port->iotype = (big_endian) ? UPIO_MEM32BE : UPIO_MEM32;
+			break;
+		default:
+			pr_warn("[%s] unsupported reg-io-width\n", match->name);
+			return -EINVAL;
+		}
+	}
+
 	if (options) {
 		strlcpy(early_console_dev.options, options,
 			sizeof(early_console_dev.options));
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 62a4df0..6d1bed8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -360,6 +360,7 @@ extern const struct earlycon_id __earlycon_table_end[];
 
 extern int setup_earlycon(char *buf);
 extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match,
+			     unsigned long node,
 			     const char *options);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311060 — Re: [PATCH v5 05/11] of: earlycon: Initialize port fields from DT properties

Fromkbuild test robot <lkp@intel.com>
Date2016-01-16 23:00 +0100
SubjectRe: [PATCH v5 05/11] of: earlycon: Initialize port fields from DT properties
Message-ID<qRH34-1IJ-9@gated-at.bofh.it>
In reply to#1311051

[Multipart message — attachments visible in raw view] — view raw

Hi Peter,

[auto build test ERROR on tty/tty-testing]
[also build test ERROR on v4.4 next-20160115]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Peter-Hurley/Earlycon-cleanup/20160117-054602
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
config: x86_64-randconfig-x012-201603 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All error/warnings (new ones prefixed by >>):

   drivers/tty/serial/earlycon.c: In function 'of_setup_earlycon':
>> drivers/tty/serial/earlycon.c:235:8: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
     val = of_get_flat_dt_prop(node, "reg-offset", NULL);
           ^
>> drivers/tty/serial/earlycon.c:235:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-offset", NULL);
         ^
   drivers/tty/serial/earlycon.c:238:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-shift", NULL);
         ^
>> drivers/tty/serial/earlycon.c:241:61: warning: comparison between pointer and integer
     big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
                                                                ^
   drivers/tty/serial/earlycon.c:243:53: warning: comparison between pointer and integer
       of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
                                                        ^
   drivers/tty/serial/earlycon.c:244:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
         ^
   cc1: some warnings being treated as errors

vim +/of_get_flat_dt_prop +235 drivers/tty/serial/earlycon.c

   229		spin_lock_init(&port->lock);
   230		port->iotype = UPIO_MEM;
   231		port->mapbase = addr;
   232		port->uartclk = BASE_BAUD * 16;
   233		port->membase = earlycon_map(addr, SZ_4K);
   234	
 > 235		val = of_get_flat_dt_prop(node, "reg-offset", NULL);
   236		if (val)
   237			port->mapbase += be32_to_cpu(*val);
   238		val = of_get_flat_dt_prop(node, "reg-shift", NULL);
   239		if (val)
   240			port->regshift = be32_to_cpu(*val);
 > 241		big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
   242			(IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) &&
   243			 of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
   244		val = of_get_flat_dt_prop(node, "reg-io-width", NULL);

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[toc] | [prev] | [next] | [standalone]

#1311052 — [PATCH v5 02/11] serial: earlycon: Fixup earlycon console name and index

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 02/11] serial: earlycon: Fixup earlycon console name and index
Message-ID<qRGTn-1Ej-5@gated-at.bofh.it>
In reply to#1311046
Properly initialize the struct console 'name' and 'index' fields for
the registering earlycon. For earlycons w/o trailing numerals, the
index is set to 0; otherwise, the index is set to the value of the
trailing numeral. For example, the 'exynos4210' earlycon name == "exynos"
and index == 4210. Earlycons with embedded numerals will have all
non-trailing numerals as part of the name; for example, the 's3c2412'
earlycon name == "s3c" and index == 2412.

This ackward scheme was initially added for the uart8250 earlycon;
adopt this scheme for the other earlycon "drivers".

Introduce earlycon_init() which performs the string scanning and
initializes the name and index fields; encapsulate the other console
field initializations within.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/earlycon.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 765bce6..0da5698 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -27,9 +27,9 @@
 #include <asm/serial.h>
 
 static struct console early_con = {
-	.name =		"uart", /* 8250 console switch requires this name */
+	.name =		"uart",		/* fixed up at earlycon registration */
 	.flags =	CON_PRINTBUFFER | CON_BOOT,
-	.index =	-1,
+	.index =	0,
 };
 
 static struct earlycon_device early_console_dev = {
@@ -53,6 +53,25 @@ static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
 	return base;
 }
 
+static void __init earlycon_init(struct earlycon_device *device,
+				 const char *name)
+{
+	struct console *earlycon = device->con;
+	const char *s;
+	size_t len;
+
+	/* scan backwards from end of string for first non-numeral */
+	for (s = name + strlen(name);
+	     s > name && s[-1] >= '0' && s[-1] <= '9';
+	     s--)
+		;
+	if (*s)
+		earlycon->index = simple_strtoul(s, NULL, 10);
+	len = s - name;
+	strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name)));
+	earlycon->data = &early_console_dev;
+}
+
 static int __init parse_options(struct earlycon_device *device, char *options)
 {
 	struct uart_port *port = &device->port;
@@ -119,7 +138,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
 	if (port->mapbase)
 		port->membase = earlycon_map(port->mapbase, 64);
 
-	early_console_dev.con->data = &early_console_dev;
+	earlycon_init(&early_console_dev, match->name);
 	err = match->setup(&early_console_dev, buf);
 	if (err < 0)
 		return err;
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311054 — [PATCH v5 03/11] of: earlycon: Fixup earlycon console name and index

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 03/11] of: earlycon: Fixup earlycon console name and index
Message-ID<qRGTo-1Ej-9@gated-at.bofh.it>
In reply to#1311046
Use the console name embedded in the OF earlycon table by the
OF_EARLYCON_DECLARE() macro to initialize the struct console 'name'
and 'index' fields.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              | 2 +-
 drivers/tty/serial/earlycon.c | 6 +++---
 include/linux/serial_core.h   | 3 +--
 3 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 1686118..ec14595 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -838,7 +838,7 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match->setup);
+		of_setup_earlycon(addr, match);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 0da5698..f4b5490 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -216,7 +216,7 @@ static int __init param_setup_earlycon(char *buf)
 early_param("earlycon", param_setup_earlycon);
 
 int __init of_setup_earlycon(unsigned long addr,
-			     int (*setup)(struct earlycon_device *, const char *))
+			     const struct earlycon_id *match)
 {
 	int err;
 	struct uart_port *port = &early_console_dev.port;
@@ -227,8 +227,8 @@ int __init of_setup_earlycon(unsigned long addr,
 	port->uartclk = BASE_BAUD * 16;
 	port->membase = earlycon_map(addr, SZ_4K);
 
-	early_console_dev.con->data = &early_console_dev;
-	err = setup(&early_console_dev, NULL);
+	earlycon_init(&early_console_dev, match->name);
+	err = match->setup(&early_console_dev, NULL);
 	if (err < 0)
 		return err;
 	if (!early_console_dev.con->write)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 25e0514..63fdb55 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -359,8 +359,7 @@ extern const struct earlycon_id __earlycon_table_end[];
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
 extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr,
-			     int (*setup)(struct earlycon_device *, const char *));
+extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311056 — [PATCH v5 04/11] of: earlycon: Add options string handling

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 04/11] of: earlycon: Add options string handling
Message-ID<qRGTo-1Ej-13@gated-at.bofh.it>
In reply to#1311046
Pass-through any options string in the 'stdout-path' property to the
earlycon "driver" setup.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              | 11 ++++++-----
 drivers/tty/serial/earlycon.c |  9 +++++++--
 include/linux/serial_core.h   |  3 ++-
 3 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index ec14595..cfd3b35 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -800,7 +800,7 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
-	const char *p;
+	const char *p, *q, *options = NULL;
 	int l;
 	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
@@ -817,11 +817,12 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (!p || !l)
 		return -ENOENT;
 
-	/* Remove console options if present */
-	l = strchrnul(p, ':') - p;
+	q = strchrnul(p, ':');
+	if (*q != '\0')
+		options = q + 1;
 
 	/* Get the node specified by stdout-path */
-	offset = fdt_path_offset_namelen(fdt, p, l);
+	offset = fdt_path_offset_namelen(fdt, p, q - p);
 	if (offset < 0)
 		return -ENODEV;
 
@@ -838,7 +839,7 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match);
+		of_setup_earlycon(addr, match, options);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index f4b5490..d50ed78 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -216,7 +216,8 @@ static int __init param_setup_earlycon(char *buf)
 early_param("earlycon", param_setup_earlycon);
 
 int __init of_setup_earlycon(unsigned long addr,
-			     const struct earlycon_id *match)
+			     const struct earlycon_id *match,
+			     const char *options)
 {
 	int err;
 	struct uart_port *port = &early_console_dev.port;
@@ -227,8 +228,12 @@ int __init of_setup_earlycon(unsigned long addr,
 	port->uartclk = BASE_BAUD * 16;
 	port->membase = earlycon_map(addr, SZ_4K);
 
+	if (options) {
+		strlcpy(early_console_dev.options, options,
+			sizeof(early_console_dev.options));
+	}
 	earlycon_init(&early_console_dev, match->name);
-	err = match->setup(&early_console_dev, NULL);
+	err = match->setup(&early_console_dev, options);
 	if (err < 0)
 		return err;
 	if (!early_console_dev.con->write)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 63fdb55..62a4df0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -359,7 +359,8 @@ extern const struct earlycon_id __earlycon_table_end[];
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
 extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match);
+extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match,
+			     const char *options);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311057 — [PATCH v5 09/11] serial: 8250_early: Use port->regshift

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 09/11] serial: 8250_early: Use port->regshift
Message-ID<qRGTo-1Ej-21@gated-at.bofh.it>
In reply to#1311046
earlycon initializes struct uart_port::regshift to the correct
value for UPIO_MEM32 already. Use the port field rather than
hard-coded value.

This enables broader support for various i/o access methods in
8250 earlycon (eg., omap8250 earlycon).

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/8250/8250_early.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index af62131..180143c 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,15 +39,17 @@
 
 static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		return readb(port->membase + offset);
 	case UPIO_MEM16:
-		return readw(port->membase + (offset << 1));
+		return readw(port->membase + offset);
 	case UPIO_MEM32:
-		return readl(port->membase + (offset << 2));
+		return readl(port->membase + offset);
 	case UPIO_MEM32BE:
-		return ioread32be(port->membase + (offset << 2));
+		return ioread32be(port->membase + offset);
 	case UPIO_PORT:
 		return inb(port->iobase + offset);
 	default:
@@ -57,18 +59,20 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 
 static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		writeb(value, port->membase + offset);
 		break;
 	case UPIO_MEM16:
-		writew(value, port->membase + (offset << 1));
+		writew(value, port->membase + offset);
 		break;
 	case UPIO_MEM32:
-		writel(value, port->membase + (offset << 2));
+		writel(value, port->membase + offset);
 		break;
 	case UPIO_MEM32BE:
-		iowrite32be(value, port->membase + (offset << 2));
+		iowrite32be(value, port->membase + offset);
 		break;
 	case UPIO_PORT:
 		outb(value, port->iobase + offset);
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311058 — [PATCH v5 08/11] serial: earlycon: Show the earlycon "driver" in banner

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 08/11] serial: earlycon: Show the earlycon "driver" in banner
Message-ID<qRGTo-1Ej-25@gated-at.bofh.it>
In reply to#1311046
Output the earlycon "driver" from the just-parsed console 'name'
and 'index' fields.

NB: ->mapbase is a resource_size_t so use %pa format specifier

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/earlycon.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index ff22200..eec8dfe 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -76,16 +76,16 @@ static void __init earlycon_init(struct earlycon_device *device,
 
 	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
 	    port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
-		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+		pr_info("%s%d at MMIO%s %pa (options '%s')\n",
+			earlycon->name, earlycon->index,
 			(port->iotype == UPIO_MEM) ? "" :
 			(port->iotype == UPIO_MEM16) ? "16" :
 			(port->iotype == UPIO_MEM32) ? "32" : "32be",
-			(unsigned long long)port->mapbase,
-			device->options);
+			&port->mapbase, device->options);
 	else
-		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
+		pr_info("%s%d at I/O port 0x%lx (options '%s')\n",
+			earlycon->name, earlycon->index,
+			port->iobase, device->options);
 }
 
 static int __init parse_options(struct earlycon_device *device, char *options)
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311059 — [PATCH v5 10/11] of: earlycon: Log more helpful message if stdout-path node not found

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-16 22:50 +0100
Subject[PATCH v5 10/11] of: earlycon: Log more helpful message if stdout-path node not found
Message-ID<qRGTo-1Ej-27@gated-at.bofh.it>
In reply to#1311046
Earlycon may fail to initialize for a variety of reasons, most of
which log the default early param message. If the stdout-path node is
not found, log the path which was not found (and suppress the
default early param message).

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 918809e..e2295b2 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -820,11 +820,14 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	q = strchrnul(p, ':');
 	if (*q != '\0')
 		options = q + 1;
+	l = q - p;
 
 	/* Get the node specified by stdout-path */
-	offset = fdt_path_offset_namelen(fdt, p, q - p);
-	if (offset < 0)
-		return -ENODEV;
+	offset = fdt_path_offset_namelen(fdt, p, l);
+	if (offset < 0) {
+		pr_warn("earlycon: stdout-path %.*s not found\n", l, p);
+		return 0;
+	}
 
 	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		if (!match->compatible[0])
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311071 — [PATCH v6 11/12] of: earlycon: Log more helpful message if stdout-path node not found

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 11/12] of: earlycon: Log more helpful message if stdout-path node not found
Message-ID<qRIsa-2KH-11@gated-at.bofh.it>
In reply to#1311046
Earlycon may fail to initialize for a variety of reasons, most of
which log the default early param message. If the stdout-path node is
not found, log the path which was not found (and suppress the
default early param message).

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 918809e..e2295b2 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -820,11 +820,14 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	q = strchrnul(p, ':');
 	if (*q != '\0')
 		options = q + 1;
+	l = q - p;
 
 	/* Get the node specified by stdout-path */
-	offset = fdt_path_offset_namelen(fdt, p, q - p);
-	if (offset < 0)
-		return -ENODEV;
+	offset = fdt_path_offset_namelen(fdt, p, l);
+	if (offset < 0) {
+		pr_warn("earlycon: stdout-path %.*s not found\n", l, p);
+		return 0;
+	}
 
 	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		if (!match->compatible[0])
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311072 — [PATCH v6 05/12] of: earlycon: Add options string handling

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 05/12] of: earlycon: Add options string handling
Message-ID<qRIsa-2KH-17@gated-at.bofh.it>
In reply to#1311046
Pass-through any options string in the 'stdout-path' property to the
earlycon "driver" setup.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              | 11 ++++++-----
 drivers/tty/serial/earlycon.c |  9 +++++++--
 include/linux/serial_core.h   |  3 ++-
 3 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index ec14595..cfd3b35 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -800,7 +800,7 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
-	const char *p;
+	const char *p, *q, *options = NULL;
 	int l;
 	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
@@ -817,11 +817,12 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (!p || !l)
 		return -ENOENT;
 
-	/* Remove console options if present */
-	l = strchrnul(p, ':') - p;
+	q = strchrnul(p, ':');
+	if (*q != '\0')
+		options = q + 1;
 
 	/* Get the node specified by stdout-path */
-	offset = fdt_path_offset_namelen(fdt, p, l);
+	offset = fdt_path_offset_namelen(fdt, p, q - p);
 	if (offset < 0)
 		return -ENODEV;
 
@@ -838,7 +839,7 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match);
+		of_setup_earlycon(addr, match, options);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 47e54de..7509ee34d 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -218,7 +218,8 @@ early_param("earlycon", param_setup_earlycon);
 #ifdef CONFIG_OF_EARLY_FLATTREE
 
 int __init of_setup_earlycon(unsigned long addr,
-			     const struct earlycon_id *match)
+			     const struct earlycon_id *match,
+			     const char *options)
 {
 	int err;
 	struct uart_port *port = &early_console_dev.port;
@@ -229,8 +230,12 @@ int __init of_setup_earlycon(unsigned long addr,
 	port->uartclk = BASE_BAUD * 16;
 	port->membase = earlycon_map(addr, SZ_4K);
 
+	if (options) {
+		strlcpy(early_console_dev.options, options,
+			sizeof(early_console_dev.options));
+	}
 	earlycon_init(&early_console_dev, match->name);
-	err = match->setup(&early_console_dev, NULL);
+	err = match->setup(&early_console_dev, options);
 	if (err < 0)
 		return err;
 	if (!early_console_dev.con->write)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 63fdb55..62a4df0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -359,7 +359,8 @@ extern const struct earlycon_id __earlycon_table_end[];
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
 extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match);
+extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match,
+			     const char *options);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311073 — [PATCH v6 04/12] of: earlycon: Fixup earlycon console name and index

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 04/12] of: earlycon: Fixup earlycon console name and index
Message-ID<qRIsa-2KH-21@gated-at.bofh.it>
In reply to#1311046
Use the console name embedded in the OF earlycon table by the
OF_EARLYCON_DECLARE() macro to initialize the struct console 'name'
and 'index' fields.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c              | 2 +-
 drivers/tty/serial/earlycon.c | 6 +++---
 include/linux/serial_core.h   | 3 +--
 3 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 1686118..ec14595 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -838,7 +838,7 @@ static int __init early_init_dt_scan_chosen_serial(void)
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match->setup);
+		of_setup_earlycon(addr, match);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 90b064f..47e54de 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -218,7 +218,7 @@ early_param("earlycon", param_setup_earlycon);
 #ifdef CONFIG_OF_EARLY_FLATTREE
 
 int __init of_setup_earlycon(unsigned long addr,
-			     int (*setup)(struct earlycon_device *, const char *))
+			     const struct earlycon_id *match)
 {
 	int err;
 	struct uart_port *port = &early_console_dev.port;
@@ -229,8 +229,8 @@ int __init of_setup_earlycon(unsigned long addr,
 	port->uartclk = BASE_BAUD * 16;
 	port->membase = earlycon_map(addr, SZ_4K);
 
-	early_console_dev.con->data = &early_console_dev;
-	err = setup(&early_console_dev, NULL);
+	earlycon_init(&early_console_dev, match->name);
+	err = match->setup(&early_console_dev, NULL);
 	if (err < 0)
 		return err;
 	if (!early_console_dev.con->write)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 25e0514..63fdb55 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -359,8 +359,7 @@ extern const struct earlycon_id __earlycon_table_end[];
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
 extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr,
-			     int (*setup)(struct earlycon_device *, const char *));
+extern int of_setup_earlycon(unsigned long addr, const struct earlycon_id *match);
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311074 — [PATCH v6 09/12] serial: earlycon: Show the earlycon "driver" in banner

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 09/12] serial: earlycon: Show the earlycon "driver" in banner
Message-ID<qRIsb-2KH-23@gated-at.bofh.it>
In reply to#1311046
Output the earlycon "driver" from the just-parsed console 'name'
and 'index' fields.

NB: ->mapbase is a resource_size_t so use %pa format specifier

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/earlycon.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 36b79f1..067783f 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -76,16 +76,16 @@ static void __init earlycon_init(struct earlycon_device *device,
 
 	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
 	    port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
-		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+		pr_info("%s%d at MMIO%s %pa (options '%s')\n",
+			earlycon->name, earlycon->index,
 			(port->iotype == UPIO_MEM) ? "" :
 			(port->iotype == UPIO_MEM16) ? "16" :
 			(port->iotype == UPIO_MEM32) ? "32" : "32be",
-			(unsigned long long)port->mapbase,
-			device->options);
+			&port->mapbase, device->options);
 	else
-		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
+		pr_info("%s%d at I/O port 0x%lx (options '%s')\n",
+			earlycon->name, earlycon->index,
+			port->iobase, device->options);
 }
 
 static int __init parse_options(struct earlycon_device *device, char *options)
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311075 — [PATCH v6 00/12] Earlycon cleanup

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 00/12] Earlycon cleanup
Message-ID<qRIsa-2KH-13@gated-at.bofh.it>
In reply to#1311046
Hi Greg, Grant & Rob,

This patch series is a rebase of the v3 from April last year.

This patch series builds on my earlier "Extensible console matching &
direct earlycon" to add several useful features to earlycon:
* Proper port i/o configuration from DT node with of_serial properties
  (such as reg-io-width, reg-shift and reg-offset, and endianness)
* Proper console name & index initialization from earlycon name
  (for both command line and DT-defined earlycons)
* Support for DT 'stdout-path' options pass-through to earlycon setup
* Improved log messages for troubleshooting
* Support for multiple OF earlycon declarations so different
  compatible strings can specify the same OF earlycon

* Changes from v3
  - Added 32-bit big-endian support
  - Removed the omap8250 earlycon (will follow later)
* Changes from v4
  - Rolled in Rob's acks (thanks for reviewing this series)
  - Removed the conditional guard of of_fdt.h header inclusion (Rob's comment)
  - Left in the omap8250 earlycon (rebased w/o the wip so applies cleanly)
* Changes from v5
  - Builds :/
    "of: earlycon: of_setup_earlycon() requires CONFIG_OF_EARLY_FLATREE"
    didn't make it into v4 so I left it out of v5. That'll teach me.

Regards,

Peter Hurley (12):
  of: earlycon: of_setup_earlycon() requires CONFIG_OF_EARLY_FLATTREE
  earlycon: Use common framework for earlycon declarations
  serial: earlycon: Fixup earlycon console name and index
  of: earlycon: Fixup earlycon console name and index
  of: earlycon: Add options string handling
  of: earlycon: Initialize port fields from DT properties
  of: earlycon: Move address translation to of_setup_earlycon()
  serial: earlycon: Common log banner for command line and DT
  serial: earlycon: Show the earlycon "driver" in banner
  serial: 8250_early: Use port->regshift
  of: earlycon: Log more helpful message if stdout-path node not found
  serial: 8250_omap: Add omap8250 earlycon

 drivers/of/fdt.c                     |  32 +++++-----
 drivers/of/fdt_address.c             |  11 +++-
 drivers/tty/serial/8250/8250_early.c |  37 +++++++++--
 drivers/tty/serial/amba-pl011.c      |   1 -
 drivers/tty/serial/arc_uart.c        |   1 -
 drivers/tty/serial/earlycon.c        | 118 ++++++++++++++++++++++++++---------
 drivers/tty/serial/msm_serial.c      |   2 -
 drivers/tty/serial/samsung.c         |   6 --
 drivers/tty/serial/sprd_serial.c     |   2 -
 include/asm-generic/vmlinux.lds.h    |   6 +-
 include/linux/of_fdt.h               |   2 +-
 include/linux/serial_core.h          |  25 +++++---
 12 files changed, 162 insertions(+), 81 deletions(-)

-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

#1311076 — [PATCH v6 02/12] earlycon: Use common framework for earlycon declarations

FromPeter Hurley <peter@hurleysoftware.com>
Date2016-01-17 00:30 +0100
Subject[PATCH v6 02/12] earlycon: Use common framework for earlycon declarations
Message-ID<qRIsb-2KH-29@gated-at.bofh.it>
In reply to#1311075
Use a single common table of struct earlycon_id for both command line
and devicetree. Re-define OF_EARLYCON_DECLARE() macro to instance a
unique earlycon declaration (the declaration is only guaranteed to be
unique within a compilation unit; separate compilation units must still
use unique earlycon names).

The semantics of OF_EARLYCON_DECLARE() is different; it declares an
earlycon which can matched either on the command line or by devicetree.
EARLYCON_DECLARE() is semantically unchanged; it declares an earlycon
which is matched by command line only. Remove redundant instances of
EARLYCON_DECLARE().

This enables all earlycons to properly initialize struct console
with the appropriate name and index, which improves diagnostics and
enables direct earlycon-to-console handoff.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/of/fdt.c                  | 14 +++++++-------
 drivers/tty/serial/amba-pl011.c   |  1 -
 drivers/tty/serial/arc_uart.c     |  1 -
 drivers/tty/serial/earlycon.c     | 10 +---------
 drivers/tty/serial/msm_serial.c   |  2 --
 drivers/tty/serial/samsung.c      |  6 ------
 drivers/tty/serial/sprd_serial.c  |  2 --
 include/asm-generic/vmlinux.lds.h |  6 ++----
 include/linux/serial_core.h       | 22 +++++++++++++---------
 9 files changed, 23 insertions(+), 41 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 655f79d..1686118 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -796,14 +796,13 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_SERIAL_EARLYCON
-extern struct of_device_id __earlycon_of_table[];
 
 static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
 	const char *p;
 	int l;
-	const struct of_device_id *match = __earlycon_of_table;
+	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
 
 	offset = fdt_path_offset(fdt, "/chosen");
@@ -826,19 +825,20 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (offset < 0)
 		return -ENODEV;
 
-	while (match->compatible[0]) {
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		u64 addr;
 
-		if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
-			match++;
+		if (!match->compatible[0])
+			continue;
+
+		if (fdt_node_check_compatible(fdt, offset, match->compatible))
 			continue;
-		}
 
 		addr = fdt_translate_address(fdt, offset);
 		if (addr == OF_BAD_ADDR)
 			return -ENXIO;
 
-		of_setup_earlycon(addr, match->data);
+		of_setup_earlycon(addr, match->setup);
 		return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c0da0cc..de84602 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2327,7 +2327,6 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 	device->con->write = pl011_early_write;
 	return 0;
 }
-EARLYCON_DECLARE(pl011, pl011_early_console_setup);
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
 
 #else
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 03ebe40..3a1de5c 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -576,7 +576,6 @@ static int __init arc_early_console_setup(struct earlycon_device *dev,
 	dev->con->write = arc_early_serial_write;
 	return 0;
 }
-EARLYCON_DECLARE(arc_uart, arc_early_console_setup);
 OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup);
 
 #endif	/* CONFIG_SERIAL_ARC_CONSOLE */
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 54419a2..d50b700 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/sizes.h>
-#include <linux/mod_devicetable.h>
 
 #ifdef CONFIG_FIX_EARLYCON_MEM
 #include <asm/fixmap.h>
@@ -37,13 +36,6 @@ static struct earlycon_device early_console_dev = {
 	.con = &early_con,
 };
 
-extern struct earlycon_id __earlycon_table[];
-static const struct earlycon_id __earlycon_table_sentinel
-	__used __section(__earlycon_table_end);
-
-static const struct of_device_id __earlycon_of_table_sentinel
-	__used __section(__earlycon_of_table_end);
-
 static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
 {
 	void __iomem *base;
@@ -166,7 +158,7 @@ int __init setup_earlycon(char *buf)
 	if (early_con.flags & CON_ENABLED)
 		return -EALREADY;
 
-	for (match = __earlycon_table; match->name[0]; match++) {
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
 		size_t len = strlen(match->name);
 
 		if (strncmp(buf, match->name, len))
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index dcde955..96d3ce8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1478,7 +1478,6 @@ msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
 	device->con->write = msm_serial_early_write;
 	return 0;
 }
-EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup);
 OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
 		    msm_serial_early_console_setup);
 
@@ -1500,7 +1499,6 @@ msm_serial_early_console_setup_dm(struct earlycon_device *device,
 	device->con->write = msm_serial_early_write_dm;
 	return 0;
 }
-EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm);
 OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
 		    msm_serial_early_console_setup_dm);
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d72cd73..fd9c47f 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -2451,7 +2451,6 @@ static int __init s3c2410_early_console_setup(struct earlycon_device *device,
 }
 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
 			s3c2410_early_console_setup);
-EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
 
 /* S3C2412, S3C2440, S3C64xx */
 static struct samsung_early_console_data s3c2440_early_console_data = {
@@ -2470,9 +2469,6 @@ OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
 			s3c2440_early_console_setup);
 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
 			s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
 
 /* S5PV210, EXYNOS */
 static struct samsung_early_console_data s5pv210_early_console_data = {
@@ -2489,8 +2485,6 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
 			s5pv210_early_console_setup);
 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
 			s5pv210_early_console_setup);
-EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
-EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
 #endif
 
 MODULE_ALIAS("platform:samsung-uart");
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index ef26c4a..1897106 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -624,8 +624,6 @@ static int __init sprd_early_console_setup(
 	device->con->write = sprd_early_write;
 	return 0;
 }
-
-EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
 OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
 		    sprd_early_console_setup);
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c4bd0e2..e9a81a6 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -157,7 +157,7 @@
 #define EARLYCON_TABLE() STRUCT_ALIGN();			\
 			 VMLINUX_SYMBOL(__earlycon_table) = .;	\
 			 *(__earlycon_table)			\
-			 *(__earlycon_table_end)
+			 VMLINUX_SYMBOL(__earlycon_table_end) = .;
 #else
 #define EARLYCON_TABLE()
 #endif
@@ -179,7 +179,6 @@
 #define RESERVEDMEM_OF_TABLES()	OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
 #define CPU_METHOD_OF_TABLES()	OF_TABLE(CONFIG_SMP, cpu_method)
 #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
-#define EARLYCON_OF_TABLES()	OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon)
 
 #ifdef CONFIG_ACPI
 #define ACPI_PROBE_TABLE(name)						\
@@ -526,8 +525,7 @@
 	IRQCHIP_OF_MATCH_TABLE()					\
 	ACPI_PROBE_TABLE(irqchip)					\
 	ACPI_PROBE_TABLE(clksrc)					\
-	EARLYCON_TABLE()						\
-	EARLYCON_OF_TABLES()
+	EARLYCON_TABLE()
 
 #define INIT_TEXT							\
 	*(.init.text)							\
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index e03d6ba..25e0514 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -342,22 +342,26 @@ struct earlycon_device {
 
 struct earlycon_id {
 	char	name[16];
+	char	compatible[128];
 	int	(*setup)(struct earlycon_device *, const char *options);
 } __aligned(32);
 
+extern const struct earlycon_id __earlycon_table[];
+extern const struct earlycon_id __earlycon_table_end[];
+
+#define OF_EARLYCON_DECLARE(_name, compat, fn)				\
+	static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name)	\
+	     __used __section(__earlycon_table)				\
+		= { .name = __stringify(_name),				\
+		    .compatible = compat,				\
+		    .setup = fn  }
+
+#define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
+
 extern int setup_earlycon(char *buf);
 extern int of_setup_earlycon(unsigned long addr,
 			     int (*setup)(struct earlycon_device *, const char *));
 
-#define EARLYCON_DECLARE(_name, func)					\
-	static const struct earlycon_id __earlycon_##_name		\
-		__used __section(__earlycon_table)			\
-		 = { .name  = __stringify(_name),			\
-		     .setup = func  }
-
-#define OF_EARLYCON_DECLARE(name, compat, fn)				\
-	_OF_DECLARE(earlycon, name, compat, fn, void *)
-
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
 int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
-- 
2.7.0

[toc] | [prev] | [next] | [standalone]

Page 1 of 2  [1] 2  Next page →

Back to top | Article view | linux.kernel

csiph-web