Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1304099 > unrolled thread

[PATCH v2 1/3] net: ethernet: arc: Probe emac after set RMII clock

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 1/3] net: ethernet: arc: Probe emac after set RMII clock Xing Zheng <zhengxing@rock-chips.com> - 2016-01-08 02:40 +0100

#1304099 — [PATCH v2 1/3] net: ethernet: arc: Probe emac after set RMII clock

After enter arc_emac_probe, emac will get_phy_id, phy_poll_reset and
other connecting PHY via mdiobus_read, so we need to set correct
ref clock rate for emac before probe emac.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

Changes in v2: None

 drivers/net/ethernet/arc/emac_rockchip.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index c31c740..36e9eb1 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -164,10 +164,6 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 		}
 	}
 
-	err = arc_emac_probe(ndev, interface);
-	if (err)
-		goto out_regulator_disable;
-
 	/* write-enable bits */
 	data = GRF_MODE_ENABLE_BIT | GRF_SPEED_ENABLE_BIT;
 
@@ -184,6 +180,13 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 	err = clk_set_rate(priv->refclk, 50000000);
 	if (err)
 		dev_err(dev, "failed to change reference clock rate (%d)\n", err);
+
+	err = arc_emac_probe(ndev, interface);
+	if (err) {
+		dev_err(dev, "failed to probe arc emac (%d)\n", err);
+		goto out_regulator_disable;
+	}
+
 	return 0;
 
 out_regulator_disable:
-- 
1.7.9.5

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web