Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1301699 > unrolled thread
| Started by | Marcel Ziswiler <marcel.ziswiler@toradex.com> |
|---|---|
| First post | 2016-01-05 17:50 +0100 |
| Last post | 2016-01-08 12:20 +0100 |
| Articles | 8 — 3 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-01-05 17:50 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Petr Štetiar <ynezz@true.cz> - 2016-01-06 09:20 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-01-06 11:50 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Petr Štetiar <ynezz@true.cz> - 2016-01-08 09:50 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-01-08 12:20 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Stefan Agner <stefan@agner.ch> - 2016-01-07 07:40 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Petr Štetiar <ynezz@true.cz> - 2016-01-08 10:00 +0100
Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-01-08 12:20 +0100
| From | Marcel Ziswiler <marcel.ziswiler@toradex.com> |
|---|---|
| Date | 2016-01-05 17:50 +0100 |
| Subject | [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qNCY3-5qN-25@gated-at.bofh.it> |
From: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v2:
- clarify exact Apalis iMX6Q/D SoM type in cover letter
- clarify exact Apalis iMX6Q/D module type and Ixora carrier board in model
node
- got rid of obsolete mmc aliases
- working SGTL5000 audio/sound integration
- working STMPE811 touch screen controller integration
- integrated review feedback from Lucas
- left and even added some more comments as I don't see why putting any
explanatory comments in dts' should be such a bad thing to do
- completely got rid of the memory node as that is something typically filled
in by the boot loader e.g. U-Boot
- without the regulators simple-bus it no longer boots
- even though we supposedly shipped a few hundred V1.0a modules drop DCE UART
support for now and simplify file layout
- replaced obsolete no-1-8-v by mainline supported voltage-ranges = <3300 3300>
usdhc property and yes card detects are indeed active low (;-p)
- integrated review feedback from Stefan
- fixed Ethernet PHY reset & interrupt (requires Micrel PHY driver to be
enabled)
- fixed HDMI DDC (requires GPIO-based bitbanging I2C to be enabled)
- fixed SPDIF
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1040 +++++++++++++++++++++++++++++++++
1 file changed, 1040 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 0000000..6104e2e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,1040 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Toradex Apalis iMX6Q/D Module";
+ compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ status = "disabled";
+ };
+
+ /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
+ i2cddc: i2c@0 {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_ddc>;
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
+ &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_1p8v: 1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ /* on module usb hub */
+ reg_usb_host_vbus_hub: usb_host_vbus_hub {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+ regulator-name = "usb_host_vbus_hub";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <2000>;
+ enable-active-high;
+ status = "okay";
+ };
+
+ reg_usb_host_vbus: usb_host_vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+ regulator-name = "usb_host_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_usb_host_vbus_hub>;
+ status = "disabled";
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6q-apalis-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+
+ sound_spdif: sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-in;
+ spdif-out;
+ status = "disabled";
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux &pinctrl_audmux_mclk>;
+ status = "okay";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_spi_cs1>;
+ status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_spi_cs2>;
+ status = "disabled";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ phy-reset-duration = <10>;
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@7 {
+ interrupt-parent = <&gpio1>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ reg = <7>;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2cddc>;
+ status = "okay";
+};
+
+/*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
+ * board)
+ */
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ /* STMPE811 touch screen controller */
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+};
+
+/*
+ * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
+ */
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "recovery";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_recovery>;
+ scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+};
+
+/* PAD Ctrl values for common settings */
+/*
+ * (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE |
+ * PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
+ */
+#define PAD_CTRL_HYS_PU 0x1b0b0
+
+/*
+ * (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED |
+ * PAD_CTL_DSE_40ohm)
+ */
+#define PAD_CTRL_HYS_PD 0x130b0
+
+/*
+ * (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW |
+ * PAD_CTL_DSE_80ohm)
+ */
+#define PAD_CTRL_PU_22k 0x0f058
+
+&iomuxc {
+ ecspi {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+ >;
+ };
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ >;
+ };
+ pinctrl_spi_cs1: spi_cs1 {
+ fsl,pins = <
+ /* SPI1 cs */
+ MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+ >;
+ };
+ pinctrl_spi_cs2: spi_cs2 {
+ fsl,pins = <
+ /* SPI2 cs */
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+ >;
+ };
+ };
+
+ flexcan {
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+ };
+
+ gpio {
+ pinctrl_apalis_gpio1: apalis_gpio1 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio2: apalis_gpio2 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio3: apalis_gpio3 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio4: apalis_gpio4 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio5: apalis_gpio5 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio6: apalis_gpio6 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09
+ PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio7: apalis_gpio7 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_apalis_gpio8: apalis_gpio8 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 PAD_CTRL_HYS_PD
+ >;
+ };
+ pinctrl_gpio_keys: gpio_keys {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 PAD_CTRL_HYS_PU
+ >;
+ };
+ };
+
+ hdmi {
+ pinctrl_hdmi_cec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+ };
+
+ i2c {
+ pinctrl_i2c_ddc: i2c_ddc {
+ fsl,pins = <
+ /* DDC bitbang */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 PAD_CTRL_HYS_PU
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 PAD_CTRL_HYS_PU
+ >;
+ };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+ pinctrl_i2c3_recovery: i2c3-recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+ >;
+ };
+ };
+
+ /* pins used on module */
+ imx6q-apalis {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci &pinctrl_emmc_reset>;
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+ >;
+ };
+ pinctrl_audmux_mclk: audmux_mclk {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+ pinctrl_emmc_reset: emmc_reset {
+ fsl,pins = <
+ /* eMMC reset, leave it alone */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 PAD_CTRL_PU_22k
+ >;
+ };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ >;
+ };
+ pinctrl_enet_ctrl: enet_ctrlgrp {
+ fsl,pins = <
+ /* Ethernet PHY reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
+ /* Ethernet PHY interrupt */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1
+ >;
+ };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ pinctrl_ipu2_vdac: ipu2vdacgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+ MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1
+ MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1
+ MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1
+ MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9
+ MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9
+ MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9
+ MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9
+ MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9
+ MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9
+ MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9
+ MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9
+ MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9
+ MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9
+ MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9
+ MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9
+ MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9
+ MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9
+ MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9
+ MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9
+ >;
+ };
+ pinctrl_regulator_usbhub_pwr: gpio_regulator_usbhub_pwr {
+ fsl,pins = <
+ /* USBH_HUB_EN */
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 PAD_CTRL_PU_22k
+ >;
+ };
+ pinctrl_reset_moci: gpio_reset_moci {
+ fsl,pins = <
+ /* RESET_MOCI control */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28
+ PAD_CTRL_PU_22k
+ >;
+ };
+ pinctrl_touch_int: touch_intgrp {
+ fsl,pins = <
+ /* STMPE811 interrupt */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 PAD_CTRL_HYS_PU
+ >;
+ };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
+ >;
+ };
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { /* 200Mhz */
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
+ >;
+ };
+ };
+
+ ipu1 {
+ pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61
+ /* DE */
+ MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61
+ /* HSync */
+ MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61
+ /* VSync */
+ MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61
+ MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61
+ MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61
+ MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61
+ MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61
+ MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61
+ MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61
+ MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61
+ MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61
+ MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61
+ MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61
+ MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61
+ MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61
+ MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61
+ MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61
+ MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61
+ MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61
+ MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61
+ MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61
+ MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61
+ MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61
+ MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61
+ MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61
+ MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61
+ MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61
+ >;
+ };
+ pinctrl_cam_mclk: cam_mclk {
+ fsl,pins = <
+ /* CAM sys_mclk */
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+ >;
+ };
+ pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1
+ >;
+ };
+ };
+
+ pwm {
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+ };
+
+ spdif {
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+ MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_dce: uart1-dcegrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* DTE mode */
+ pinctrl_uart1_dte: uart1-dtegrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+ >;
+ };
+
+ /* Additional DTR, DSR, DCD */
+ pinctrl_uart1_ctrl: uart1-ctrlgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_dce: uart2-dcegrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ /* DTE mode */
+ pinctrl_uart2_dte: uart2grp-dte {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
+ >;
+ };
+ };
+
+ uart4 {
+ pinctrl_uart4_dce: uart4-dcegrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* DTE mode */
+ pinctrl_uart4_dte: uart4-dtegrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart5 {
+ pinctrl_uart5_dce: uart5-dcegrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* DTE mode */
+ pinctrl_uart5_dte: uart5-dtegrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ usbh {
+ pinctrl_regulator_usbh_pwr: gpio_regulator_usbh_pwr {
+ fsl,pins = <
+ /* USBH_EN */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 PAD_CTRL_PU_22k
+ >;
+ };
+ };
+
+ usbotg {
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+ pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
+ fsl,pins = <
+ /* USBO power en */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 PAD_CTRL_PU_22k
+ >;
+ };
+ };
+
+ usdhc {
+ pinctrl_mmc_cd: gpio_mmc_cd {
+ fsl,pins = <
+ /* MMC1 CD */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+ >;
+ };
+ pinctrl_sd_cd: gpio_sd_cd {
+ fsl,pins = <
+ /* SD1 CD */
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+ >;
+ };
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+ MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+ MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+ MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+ MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+ >;
+ };
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "disabled";
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "disabled";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+ fsl,dte-mode;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_dte>;
+ fsl,dte-mode;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_dte>;
+ fsl,dte-mode;
+ status = "disabled";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_dte>;
+ fsl,dte-mode;
+ status = "disabled";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_host_vbus>;
+ status = "disabled";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+ label = "MMC1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ voltage-ranges = <3300 3300>;
+ status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+ label = "SD1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <4>;
+ voltage-ranges = <3300 3300>;
+ status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ voltage-ranges = <3300 3300>;
+ non-removable;
+ status = "okay";
+};
+
+&weim {
+ status = "disabled"; /* weim signals not accessible on i.MX6 */
+};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Petr Štetiar <ynezz@true.cz> |
|---|---|
| Date | 2016-01-06 09:20 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qNRu1-6Yg-3@gated-at.bofh.it> |
| In reply to | #1301699 |
Marcel Ziswiler <marcel.ziswiler@toradex.com> [2016-01-05 17:39:01]:
Hi Marcel,
thanks for taking care of this, I'm quite busy with other tasks :(
> - integrated review feedback from Lucas
You've probably missed few of them :) See my nitpicks bellow.
> - left and even added some more comments as I don't see why putting any
> explanatory comments in dts' should be such a bad thing to do
You've marked this as v2 so I think, that you should only work on the
feedback. Ideally you shouldn't add any new stuff if it wasn't requested
otherwise you're wasting reviewer time.
> - completely got rid of the memory node as that is something typically filled
> in by the boot loader e.g. U-Boot
If I'm not mistaken, it wasn't requested by the reviewer.
> - without the regulators simple-bus it no longer boots
It works for me on 4.4.0-rc3 with following DTS[1]. BTW, this DTS is my
preparation for v2 patch series.
> - fixed Ethernet PHY reset & interrupt (requires Micrel PHY driver to be
> enabled)
Great!
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
Hope you've some kind of ACK from FSL and Linaro :)
> + reg_usb_otg_vbus: usb_otg_vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + status = "disabled";
> + };
I'm not sure, but it seems to me, that we should move this regulator into the
carrier board DTS. On our custom carrier board we've this regulator always on
and we use this GPIO for heartbeat LED, so I've this in our carrier board
DTS[2]:
reg_usb_otg_vbus: usb_otg_vbus {
/* Regulator is always on, and we use GPIO for heartbeat LED */
pinctrl-0 = <>;
gpio = <>;
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
...
usbotg {
/* GPIO3_IO22 is Heartbeat LED */
pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
};
};
> +/* PAD Ctrl values for common settings */
> +/*
> + * (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE |
> + * PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
> + */
> +#define PAD_CTRL_HYS_PU 0x1b0b0
This was requested to be reworked. I've simply replaced all the macros with
hex values.
> + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
As per review comments, all hex values should be lowercase.
1. https://github.com/ynezz/linux-2.6/blob/b27de46e67605fe1a8e386b065845a9708e8e792/arch/arm/boot/dts/imx6qdl-apalis.dtsi
2. https://github.com/ynezz/linux-2.6/blob/ec678e3734d9fff35f7ba9605469a68a3e424020/arch/arm/boot/dts/imx6qdl-apalis-gaben-flexisbc.dtsi#L143
Thanks!
-- ynezz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Marcel Ziswiler <marcel.ziswiler@toradex.com> |
|---|---|
| Date | 2016-01-06 11:50 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qNTPf-8o8-81@gated-at.bofh.it> |
| In reply to | #1302450 |
SGkgUGV0cg0KDQpPbiBXZWQsIDIwMTYtMDEtMDYgYXQgMDk6MDMgKzAxMDAsIFBldHIgxaB0ZXRp YXIgd3JvdGU6DQo+IE1hcmNlbCBaaXN3aWxlciA8bWFyY2VsLnppc3dpbGVyQHRvcmFkZXguY29t PiBbMjAxNi0wMS0wNSAxNzozOTowMV06DQo+IA0KPiBIaSBNYXJjZWwsDQo+IA0KPiB0aGFua3Mg Zm9yIHRha2luZyBjYXJlIG9mIHRoaXMsIEknbSBxdWl0ZSBidXN5IHdpdGggb3RoZXIgdGFza3Mg OigNCg0KWW91J3JlIHdlbGNvbWUuIEkga25vdyB0aGF0IGZlZWxpbmcuDQoNCj4gPiAtIGludGVn cmF0ZWQgcmV2aWV3IGZlZWRiYWNrIGZyb20gTHVjYXMNCj4gDQo+IFlvdSd2ZSBwcm9iYWJseSBt aXNzZWQgZmV3IG9mIHRoZW0gOikgU2VlIG15IG5pdHBpY2tzIGJlbGxvdy4NCg0KSSBkb24ndCB0 aGluayBzbyBidXQgd2UgZG9uJ3QgbmVjZXNzYXJpbHkgYWdyZWUgd2l0aCBhbGwgb2YgTHVjYXMn DQpmaW5kaW5ncyBwbHVzIHRoZSBkaXNjdXNzaW9uIGFib3V0IHNvbWUgb2YgdGhlIHN0dWZmIGhh c24ndCByZWFsbHkNCmNvbmNsdWRlZC4NCg0KPiA+IC0gbGVmdCBhbmQgZXZlbiBhZGRlZCBzb21l IG1vcmUgY29tbWVudHMgYXMgSSBkb24ndCBzZWUgd2h5IHB1dHRpbmcNCj4gPiBhbnkNCj4gPiDC oCBleHBsYW5hdG9yeSBjb21tZW50cyBpbiBkdHMnIHNob3VsZCBiZSBzdWNoIGEgYmFkIHRoaW5n IHRvIGRvDQoNCj4gWW91J3ZlIG1hcmtlZCB0aGlzIGFzIHYyDQoNCldlbGwsIGFzIFN0ZWZhbiBw b2ludGVkIG91dCB3ZSBhdCBUb3JhZGV4IGFyZS93ZXJlIHdvcmtpbmcgb24gdGhpcyBhcw0Kd2Vs bCBhbmQgd2UgZGlzY3Vzc2VkIHdoZXRoZXIgd2Ugc2hvdWxkIGp1c3QgaWdub3JlIHdoYXRldmVy IHlvdSBoYXZlDQpkb25lIG9yIG5vdCBkb25lIGFuZCBwb3N0IG91ciBvd24gc3R1ZmYgYnV0IGRl Y2lkZWQgdG8gcmF0aGVyIGpvaW4NCmVmZm9ydHMgbm93IGFzIHlvdSBhbHJlYWR5IGp1bXBlZCBh aGVhZC4NCg0KPiAgc28gSSB0aGluaywgdGhhdCB5b3Ugc2hvdWxkIG9ubHkgd29yayBvbiB0aGUN Cj4gZmVlZGJhY2suIElkZWFsbHkgeW91IHNob3VsZG4ndCBhZGQgYW55IG5ldyBzdHVmZiBpZiBp dCB3YXNuJ3QNCj4gcmVxdWVzdGVkDQo+IG90aGVyd2lzZSB5b3UncmUgd2FzdGluZyByZXZpZXdl ciB0aW1lLg0KDQpJIGRvbid0IHRoaW5rIHNvLiBXaGF0IGlzIGltcG9ydGFudCBpcyB0aGF0IGFu eSBjaGFuZ2VzIGFyZSBjbGVhcmx5DQpkZWNsYXJlZCB3aGljaCB3ZSBkaWQuDQoNCj4gPiAtIGNv bXBsZXRlbHkgZ290IHJpZCBvZiB0aGUgbWVtb3J5IG5vZGUgYXMgdGhhdCBpcyBzb21ldGhpbmcN Cj4gPiB0eXBpY2FsbHkgZmlsbGVkDQo+ID4gwqAgaW4gYnkgdGhlIGJvb3QgbG9hZGVyIGUuZy4g VS1Cb290DQo+IA0KPiBJZiBJJ20gbm90IG1pc3Rha2VuLCBpdCB3YXNuJ3QgcmVxdWVzdGVkIGJ5 IHRoZSByZXZpZXdlci4NCg0KTHVjYXMgd2FzIGFjdHVhbGx5IG5pdHBpY2tpbmcgYWJvdXQgdGhl IGxvY2F0aW9uIHRoZXJlb2YgYW5kIHJhdGhlcg0KdGhhbiBtb3ZpbmcgaXQgd2UgZGVjaWRlZCB0 byBqdXN0IGdldCByaWQgb2YgaXQgYXMgaXQgZG9lcyBub3Qgb25seSBub3QNCmFkZCBhbnkgdmFs dWUgYnV0IGlzIHNpbXBseSB3cm9uZyBvbiBtb3N0IG9mIHRoZSBtb2R1bGVzIGZlYXR1cmluZw0K ZGlmZmVyZW50IGFtb3VudCBvZiBtZW1vcnkuDQoNCj4gPiAtIHdpdGhvdXQgdGhlIHJlZ3VsYXRv cnMgc2ltcGxlLWJ1cyBpdCBubyBsb25nZXIgYm9vdHMNCj4gDQo+IEl0IHdvcmtzIGZvciBtZSBv biA0LjQuMC1yYzMgd2l0aCBmb2xsb3dpbmcgRFRTWzFdLiBCVFcsIHRoaXMgRFRTIGlzDQo+IG15 DQo+IHByZXBhcmF0aW9uIGZvciB2MiBwYXRjaCBzZXJpZXMuDQoNCkkgb25seSB0cmllZCB3aXRo IC1uZXh0IHN0dWZmIHNvIGl0IG1pZ2h0IGJlIHNvbWV0aGluZyBpcyBqdXN0IGJyb2tlbg0KdGhl cmUgSSBndWVzcy4NCg0KPiA+IC0gZml4ZWQgRXRoZXJuZXQgUEhZIHJlc2V0ICYgaW50ZXJydXB0 IChyZXF1aXJlcyBNaWNyZWwgUEhZIGRyaXZlcg0KPiA+IHRvIGJlDQo+ID4gwqAgZW5hYmxlZCkN Cj4gDQo+IEdyZWF0IQ0KDQpZZWFoLCB0aGF0IG9uZSB0b29rIHVzIGEgZGF5IHRvIGZpZ3VyZSBp dCBhbGwgb3V0LiBBdCB0aGUgZW5kIHdlDQphY3R1YWxseSBzdHVtYmxlZCBvdmVyIHlvdXIgUENJ ZSByZXNldCBwYXRjaCBpbnZlcnRpbmcgdGhlIG1lYW5pbmcgb2YNCmFjdGl2ZS1sb3cgdnMuIGFj dGl2ZS1oaWdoICg7LXApLg0KDQo+ID4gKyAqIFRoaXMgZmlsZSBpcyBkdWFsLWxpY2Vuc2VkOiB5 b3UgY2FuIHVzZSBpdCBlaXRoZXIgdW5kZXIgdGhlDQo+ID4gdGVybXMNCj4gPiArICogb2YgdGhl IEdQTCBvciB0aGUgWDExIGxpY2Vuc2UsIGF0IHlvdXIgb3B0aW9uLiBOb3RlIHRoYXQgdGhpcw0K PiA+IGR1YWwNCj4gPiArICogbGljZW5zaW5nIG9ubHkgYXBwbGllcyB0byB0aGlzIGZpbGUsIGFu ZCBub3QgdGhpcyBwcm9qZWN0IGFzIGENCj4gPiArICogd2hvbGUuDQo+IA0KPiBIb3BlIHlvdSd2 ZSBzb21lIGtpbmQgb2YgQUNLIGZyb20gRlNMIGFuZCBMaW5hcm8gOikNCg0KV2VsbCwgYWxsIG5l dyBEVFMnIGFyZSBub3cgZHVhbC1saWNlbnNlZCBpbmNsdWRpbmcgc2V2ZXJhbCBpLk1YIDYNCnJl bGF0ZWQgb25lcyBzbyB3ZSBhcmUgbm90IGRvaW5nIGFueXRoaW5nIHNwZWNpYWwgdGhlcmUgcmVh bGx5Lg0KDQo+ID4gKwkJcmVnX3VzYl9vdGdfdmJ1czogdXNiX290Z192YnVzIHsNCj4gPiArCQkJ Y29tcGF0aWJsZSA9ICJyZWd1bGF0b3ItZml4ZWQiOw0KPiA+ICsJCQlwaW5jdHJsLW5hbWVzID0g ImRlZmF1bHQiOw0KPiA+ICsJCQlwaW5jdHJsLTAgPQ0KPiA+IDwmcGluY3RybF9yZWd1bGF0b3Jf dXNib3RnX3B3cj47DQo+ID4gKwkJCXJlZ3VsYXRvci1uYW1lID0gInVzYl9vdGdfdmJ1cyI7DQo+ ID4gKwkJCXJlZ3VsYXRvci1taW4tbWljcm92b2x0ID0gPDUwMDAwMDA+Ow0KPiA+ICsJCQlyZWd1 bGF0b3ItbWF4LW1pY3Jvdm9sdCA9IDw1MDAwMDAwPjsNCj4gPiArCQkJZ3BpbyA9IDwmZ3BpbzMg MjIgR1BJT19BQ1RJVkVfSElHSD47DQo+ID4gKwkJCWVuYWJsZS1hY3RpdmUtaGlnaDsNCj4gPiAr CQkJc3RhdHVzID0gImRpc2FibGVkIjsNCj4gPiArCQl9Ow0KPiANCj4gSSdtIG5vdCBzdXJlLCBi dXQgaXQgc2VlbXMgdG8gbWUsIHRoYXQgd2Ugc2hvdWxkIG1vdmUgdGhpcyByZWd1bGF0b3INCj4g aW50byB0aGUNCj4gY2FycmllciBib2FyZCBEVFMuIE9uIG91ciBjdXN0b20gY2FycmllciBib2Fy ZCB3ZSd2ZSB0aGlzIHJlZ3VsYXRvcg0KPiBhbHdheXMgb24NCj4gYW5kIHdlIHVzZSB0aGlzIEdQ SU8gZm9yIGhlYXJ0YmVhdCBMRUQsIHNvIEkndmUgdGhpcyBpbiBvdXIgY2Fycmllcg0KPiBib2Fy ZA0KPiBEVFNbMl06DQoNClllcywgeW91IGFyZSBhYnNvbHV0ZWx5IHJpZ2h0IGFuZCBlLmcuIG9u IEFwYWxpcyBUMzAgWzFdIHRoYXQgaXMNCmV4YWN0bHkgaG93IHdlIGRpZCBpdC4NCg0KPiAJcmVn X3VzYl9vdGdfdmJ1czogdXNiX290Z192YnVzIHsNCj4gCQkvKiBSZWd1bGF0b3IgaXMgYWx3YXlz IG9uLCBhbmQgd2UgdXNlIEdQSU8gZm9yDQo+IGhlYXJ0YmVhdCBMRUQgKi8NCj4gCQlwaW5jdHJs LTAgPSA8PjsNCj4gCQlncGlvID0gPD47DQo+IA0KPiAJCWNvbXBhdGlibGUgPSAicmVndWxhdG9y LWZpeGVkIjsNCj4gCQlyZWd1bGF0b3ItbmFtZSA9ICJ1c2Jfb3RnX3ZidXMiOw0KPiAJCXJlZ3Vs YXRvci1taW4tbWljcm92b2x0ID0gPDUwMDAwMDA+Ow0KPiAJCXJlZ3VsYXRvci1tYXgtbWljcm92 b2x0ID0gPDUwMDAwMDA+Ow0KPiAJCXJlZ3VsYXRvci1hbHdheXMtb247DQo+IAl9Ow0KPiANCj4g CS4uLg0KPiANCj4gCXVzYm90ZyB7DQo+IAkJLyogR1BJTzNfSU8yMiBpcyBIZWFydGJlYXQgTEVE ICovDQo+IAkJcGluY3RybF9yZWd1bGF0b3JfdXNib3RnX3B3cjogZ3Bpb19yZWd1bGF0b3JfdXNi b3RnX3B3cg0KPiB7DQo+IAkJfTsNCj4gCX07DQo+IA0KPiA+ICsvKiBQQUQgQ3RybCB2YWx1ZXMg Zm9yIGNvbW1vbiBzZXR0aW5ncyAqLw0KPiA+ICsvKg0KPiA+ICsgKiAoUEFEX0NUTF9IWVMgfCBQ QURfQ1RMX1BVU18xMDBLX1VQIHwgUEFEX0NUTF9QVUUgfCBQQURfQ1RMX1BLRQ0KPiA+IHwNCj4g PiArICrCoMKgUEFEX0NUTF9TUEVFRF9NRUQgfCBQQURfQ1RMX0RTRV80MG9obSkNCj4gPiArICov DQo+ID4gKyNkZWZpbmUgUEFEX0NUUkxfSFlTX1BVIDB4MWIwYjANCj4gDQo+IFRoaXMgd2FzIHJl cXVlc3RlZCB0byBiZSByZXdvcmtlZC4gSSd2ZSBzaW1wbHkgcmVwbGFjZWQgYWxsIHRoZQ0KPiBt YWNyb3Mgd2l0aA0KPiBoZXggdmFsdWVzLg0KDQpJIGRvbid0IHRoaW5rIHRoZSByZXZpZXdlcnMg cmVhbGx5IGNvbmNsdWRlZCBvbiB0aGUgYWN0aW9uIHRvIGJlIHRha2VuDQpvbiBoZXJlIGFuZCBq dXN0IHVzaW5nIGhleCB2YWx1ZXMgaXMgcHJvYmFibHkgdGhlIG1vc3Qgc3R1cGlkIHNvbHV0aW9u Lg0KDQo+ID4gKwkJcGluY3RybF91c2RoYzNfMTAwbWh6OiB1c2RoYzNncnAtMTAwbWh6IHsgLyoN Cj4gPiAxMDBNaHogKi8NCj4gPiArCQkJZnNsLHBpbnMgPSA8DQo+ID4gKwkJCQlNWDZRRExfUEFE X1NEM19DTURfX1NEM19DTUQNCj4gPiAweDE3MEI5DQo+IA0KPiBBcyBwZXIgcmV2aWV3IGNvbW1l bnRzLCBhbGwgaGV4IHZhbHVlcyBzaG91bGQgYmUgbG93ZXJjYXNlLg0KDQpZZXMsIHdlIHByb2Jh Ymx5IG1pc3NlZCB0aGF0IG9uZS4NCg0KPiAxLiBodHRwczovL2dpdGh1Yi5jb20veW5lenovbGlu dXgtMi42L2Jsb2IvYjI3ZGU0NmU2NzYwNWZlMWE4ZTM4NmIwNjUNCj4gODQ1YTk3MDhlOGU3OTIv YXJjaC9hcm0vYm9vdC9kdHMvaW14NnFkbC1hcGFsaXMuZHRzaQ0KPiAyLiBodHRwczovL2dpdGh1 Yi5jb20veW5lenovbGludXgtMi42L2Jsb2IvZWM2NzhlMzczNGQ5ZmZmMzVmN2JhOTYwNTQNCj4g NjlhNjhhM2U0MjQwMjAvYXJjaC9hcm0vYm9vdC9kdHMvaW14NnFkbC1hcGFsaXMtZ2FiZW4tDQo+ IGZsZXhpc2JjLmR0c2kjTDE0Mw0KPiANCj4gVGhhbmtzIQ0KDQpUaGFuayB5b3UuDQoNCj4gLS0g eW5lenoNCg0KDQpbMV0gaHR0cHM6Ly9naXQua2VybmVsLm9yZy9jZ2l0L2xpbnV4L2tlcm5lbC9n aXQvdG9ydmFsZHMvbGludXguZ2l0L3RyZWUvYXJjaC9hcm0vYm9vdC9kdHMvdGVncmEzMC1hcGFs aXMtZXZhbC5kdHMjbjIzNQ0KDQpDaGVlcnMNCg0KTWFyY2VsDQo= -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Petr Štetiar <ynezz@true.cz> |
|---|---|
| Date | 2016-01-08 09:50 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qOAUa-4eB-3@gated-at.bofh.it> |
| In reply to | #1302586 |
Marcel Ziswiler <marcel.ziswiler@toradex.com> [2016-01-06 09:15:18]:
> > > <&pinctrl_regulator_usbotg_pwr>;
> > > + regulator-name = "usb_otg_vbus";
> > > + regulator-min-microvolt = <5000000>;
> > > + regulator-max-microvolt = <5000000>;
> > > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> > > + enable-active-high;
> > > + status = "disabled";
> > > + };
> >
> > I'm not sure, but it seems to me, that we should move this regulator into
> > the carrier board DTS. On our custom carrier board we've this regulator
> > always on and we use this GPIO for heartbeat LED, so I've this in our
> > carrier board DTS[2]:
>
> Yes, you are absolutely right and e.g. on Apalis T30 [1] that is exactly how
> we did it.
And what about usdhc? It leads to the same overrides in the carrier board
file:
&iomuxc {
usdhc {
/* GPIO4_IO20 is LVDS */
pinctrl_mmc_cd: gpio_mmc_cd {
};
/* Used as misc GPIOs */
pinctrl_usdhc1: usdhc1grp {
};
};
};
> > > +/* PAD Ctrl values for common settings */
> > > +/*
> > > + * (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE
> > > |
> > > + * PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
> > > + */
> > > +#define PAD_CTRL_HYS_PU 0x1b0b0
> >
> > This was requested to be reworked. I've simply replaced all the
> > macros with
> > hex values.
>
> I don't think the reviewers really concluded on the action to be taken
> on here and just using hex values is probably the most stupid solution.
It's simple, if you just leave it as it is, then it will never get merged.
That's how kernel development works :) We've at least two options here:
1. Follow the old path and just convert those macros to hex values
2. Rework it - move those macros to some header file etc.
-- ynezz
[toc] | [prev] | [next] | [standalone]
| From | Marcel Ziswiler <marcel.ziswiler@toradex.com> |
|---|---|
| Date | 2016-01-08 12:20 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qODfj-5UZ-3@gated-at.bofh.it> |
| In reply to | #1304268 |
On Fri, 2016-01-08 at 09:42 +0100, Petr Štetiar wrote:
> Marcel Ziswiler <marcel.ziswiler@toradex.com> [2016-01-06 09:15:18]:
>
> > > > <&pinctrl_regulator_usbotg_pwr>;
> > > > + regulator-name = "usb_otg_vbus";
> > > > + regulator-min-microvolt = <5000000>;
> > > > + regulator-max-microvolt = <5000000>;
> > > > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> > > > + enable-active-high;
> > > > + status = "disabled";
> > > > + };
> > >
> > > I'm not sure, but it seems to me, that we should move this
> > > regulator into
> > > the carrier board DTS. On our custom carrier board we've this
> > > regulator
> > > always on and we use this GPIO for heartbeat LED, so I've this in
> > > our
> > > carrier board DTS[2]:
> >
> > Yes, you are absolutely right and e.g. on Apalis T30 [1] that is
> > exactly how
> > we did it.
>
> And what about usdhc? It leads to the same overrides in the carrier
> board
> file:
>
> &iomuxc {
> usdhc {
> /* GPIO4_IO20 is LVDS */
> pinctrl_mmc_cd: gpio_mmc_cd {
> };
>
> /* Used as misc GPIOs */
> pinctrl_usdhc1: usdhc1grp {
> };
> };
> };
Yes, the same applies here.
> > > > +/* PAD Ctrl values for common settings */
> > > > +/*
> > > > + * (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |
> > > > PAD_CTL_PKE
> > > > >
> > > > + * PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
> > > > + */
> > > > +#define PAD_CTRL_HYS_PU 0x1b0b0
> > >
> > > This was requested to be reworked. I've simply replaced all the
> > > macros with
> > > hex values.
> >
> > I don't think the reviewers really concluded on the action to be
> > taken
> > on here and just using hex values is probably the most stupid
> > solution.
>
> It's simple, if you just leave it as it is, then it will never get
> merged.
> That's how kernel development works :)
Thanks but I don't think you need to explain us how any of this works
(;-p).
> We've at least two options here:
>
> 1. Follow the old path and just convert those macros to hex values
Yes, stupid.
> 2. Rework it - move those macros to some header file etc.
As mentioned before I don't think any agreement has been reached.
> -- ynezz
Cheers
Marcel
[toc] | [prev] | [next] | [standalone]
| From | Stefan Agner <stefan@agner.ch> |
|---|---|
| Date | 2016-01-07 07:40 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qOcoN-4el-11@gated-at.bofh.it> |
| In reply to | #1301699 |
Hi Marcel,
On 2016-01-05 08:39, Marcel Ziswiler wrote:
> From: Petr Štetiar <ynezz@true.cz>
>
> Signed-off-by: Petr Štetiar <ynezz@true.cz>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> ---
>
> Changes in v2:
> - clarify exact Apalis iMX6Q/D SoM type in cover letter
> - clarify exact Apalis iMX6Q/D module type and Ixora carrier board in model
> node
> - got rid of obsolete mmc aliases
> - working SGTL5000 audio/sound integration
> - working STMPE811 touch screen controller integration
> - integrated review feedback from Lucas
> - left and even added some more comments as I don't see why putting any
> explanatory comments in dts' should be such a bad thing to do
> - completely got rid of the memory node as that is something typically filled
> in by the boot loader e.g. U-Boot
> - without the regulators simple-bus it no longer boots
> - even though we supposedly shipped a few hundred V1.0a modules drop DCE UART
> support for now and simplify file layout
> - replaced obsolete no-1-8-v by mainline supported voltage-ranges = <3300 3300>
> usdhc property and yes card detects are indeed active low (;-p)
> - integrated review feedback from Stefan
> - fixed Ethernet PHY reset & interrupt (requires Micrel PHY driver to be
> enabled)
> - fixed HDMI DDC (requires GPIO-based bitbanging I2C to be enabled)
> - fixed SPDIF
>
> arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1040 +++++++++++++++++++++++++++++++++
> 1 file changed, 1040 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6qdl-apalis.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> new file mode 100644
> index 0000000..6104e2e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -0,0 +1,1040 @@
> +/*
> + * Copyright 2014-2016 Toradex AG
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Toradex Apalis iMX6Q/D Module";
> + compatible = "toradex,apalis_imx6q", "fsl,imx6q";
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm4 0 5000000>;
> + status = "disabled";
> + };
> +
> + /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> + i2cddc: i2c@0 {
> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c_ddc>;
> + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> + >;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + status = "okay";
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_1p8v: 1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + reg_2p5v: 2p5v {
> + compatible = "regulator-fixed";
> + regulator-name = "2P5V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-always-on;
> + };
> +
> + reg_3p3v: 3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_usb_otg_vbus: usb_otg_vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + status = "disabled";
> + };
> +
> + /* on module usb hub */
> + reg_usb_host_vbus_hub: usb_host_vbus_hub {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
> + regulator-name = "usb_host_vbus_hub";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <2000>;
> + enable-active-high;
> + status = "okay";
> + };
> +
> + reg_usb_host_vbus: usb_host_vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
> + regulator-name = "usb_host_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + vin-supply = <®_usb_host_vbus_hub>;
> + status = "disabled";
> + };
> + };
> +
> + sound {
> + compatible = "fsl,imx-audio-sgtl5000";
> + model = "imx6q-apalis-sgtl5000";
> + ssi-controller = <&ssi1>;
> + audio-codec = <&codec>;
> + audio-routing =
> + "LINE_IN", "Line In Jack",
> + "MIC_IN", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "Headphone Jack", "HP_OUT";
> + mux-int-port = <1>;
> + mux-ext-port = <4>;
> + };
> +
> + sound_spdif: sound-spdif {
> + compatible = "fsl,imx-audio-spdif";
> + model = "imx-spdif";
> + spdif-controller = <&spdif>;
> + spdif-in;
> + spdif-out;
> + status = "disabled";
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux &pinctrl_audmux_mclk>;
> + status = "okay";
> +};
> +
> +/* Apalis SPI1 */
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_spi_cs1>;
> + status = "disabled";
> +};
> +
> +/* Apalis SPI2 */
> +&ecspi2 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_spi_cs2>;
> + status = "disabled";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_ctrl>;
> + phy-mode = "rgmii";
> + phy-handle = <ðphy>;
> + phy-reset-duration = <10>;
> + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@7 {
> + interrupt-parent = <&gpio1>;
> + interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> + reg = <7>;
> + };
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + status = "disabled";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + status = "disabled";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2cddc>;
> + status = "okay";
> +};
> +
> +/*
> + * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
> + * board)
> + */
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pmic: pfuze100@08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + codec: sgtl5000@0a {
> + compatible = "fsl,sgtl5000";
> + reg = <0x0a>;
> + clocks = <&clks 201>;
> + VDDA-supply = <®_2p5v>;
> + VDDIO-supply = <®_3p3v>;
Nit: The device tree bindings mention two more properties as required
properties:
micbias-resistor-k-ohms
micbias-voltage-m-volts
However, both have "If this node is not mentioned", hence I guess they
are actually optional, but maybe we want to set an explicit value here?
> + };
> +
> + /* STMPE811 touch screen controller */
> + stmpe811@41 {
> + compatible = "st,stmpe811";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touch_int>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x41>;
> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-parent = <&gpio4>;
> + interrupt-controller;
> + id = <0>;
> + blocks = <0x5>;
> + irq-trigger = <0x1>;
> + stmpe_touchscreen {
> + compatible = "st,stmpe-ts";
> + reg = <0>;
> + /* 3.25 MHz ADC clock speed */
> + st,adc-freq = <1>;
> + /* 8 sample average control */
> + st,ave-ctrl = <3>;
> + /* 7 length fractional part in z */
> + st,fraction-z = <7>;
> + /*
> + * 50 mA typical 80 mA max touchscreen drivers
> + * current limit value
> + */
> + st,i-drive = <1>;
> + /* 12-bit ADC */
> + st,mod-12b = <1>;
> + /* internal ADC reference */
> + st,ref-sel = <0>;
> + /* ADC converstion time: 80 clocks */
> + st,sample-time = <4>;
> + /* 1 ms panel driver settling time */
> + st,settling = <3>;
> + /* 5 ms touch detect interrupt delay */
> + st,touch-det-delay = <5>;
> + };
> + };
> +};
> +
> +/*
> + * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
> + */
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "recovery";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + pinctrl-1 = <&pinctrl_i2c3_recovery>;
> + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
> + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
> + status = "disabled";
> +};
> +
> +/* PAD Ctrl values for common settings */
> +/*
> + * (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | PAD_CTL_PKE |
> + * PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
> + */
> +#define PAD_CTRL_HYS_PU 0x1b0b0
> +
> +/*
> + * (PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED |
> + * PAD_CTL_DSE_40ohm)
> + */
> +#define PAD_CTRL_HYS_PD 0x130b0
> +
> +/*
> + * (PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_LOW |
> + * PAD_CTL_DSE_80ohm)
> + */
> +#define PAD_CTRL_PU_22k 0x0f058
> +
> +&iomuxc {
I think it is a convention to move iomuxc at the very end for better
readability of the rest. At least the Vybrid dts and the more recently
added imx7d-sdb.dts follow this rule.
> + ecspi {
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
> + >;
> + };
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
> + >;
> + };
> + pinctrl_spi_cs1: spi_cs1 {
> + fsl,pins = <
> + /* SPI1 cs */
> + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
> + >;
> + };
> + pinctrl_spi_cs2: spi_cs2 {
> + fsl,pins = <
> + /* SPI2 cs */
> + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
> + >;
> + };
> + };
> +
> + flexcan {
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
> + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
> + >;
> + };
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
> + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
> + >;
> + };
> + };
> +
> + gpio {
> + pinctrl_apalis_gpio1: apalis_gpio1 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio2: apalis_gpio2 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio3: apalis_gpio3 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio4: apalis_gpio4 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio5: apalis_gpio5 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio6: apalis_gpio6 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09
> + PAD_CTRL_HYS_PD
The 80 character limit normally is not enforced for device trees, hence
I would remove that line break here...
> + >;
> + };
> + pinctrl_apalis_gpio7: apalis_gpio7 {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_apalis_gpio8: apalis_gpio8 {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_6__GPIO1_IO06 PAD_CTRL_HYS_PD
> + >;
> + };
> + pinctrl_gpio_keys: gpio_keys {
> + fsl,pins = <
> + /* Power Button */
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 PAD_CTRL_HYS_PU
> + >;
> + };
> + };
> +
> + hdmi {
> + pinctrl_hdmi_cec: hdmicecgrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> + };
> +
> + i2c {
> + pinctrl_i2c_ddc: i2c_ddc {
> + fsl,pins = <
> + /* DDC bitbang */
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 PAD_CTRL_HYS_PU
> + MX6QDL_PAD_EIM_D16__GPIO3_IO16 PAD_CTRL_HYS_PU
> + >;
> + };
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> + >;
> + };
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
> + >;
> + };
> + pinctrl_i2c3_recovery: i2c3-recoverygrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
> + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
> + >;
> + };
> + };
> +
> + /* pins used on module */
> + imx6q-apalis {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reset_moci &pinctrl_emmc_reset>;
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
> + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
> + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
> + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
> + >;
> + };
> + pinctrl_audmux_mclk: audmux_mclk {
> + fsl,pins = <
> + /* SGTL5000 sys_mclk */
> + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
> + >;
> + };
> + pinctrl_emmc_reset: emmc_reset {
> + fsl,pins = <
> + /* eMMC reset, leave it alone */
> + MX6QDL_PAD_SD3_RST__GPIO7_IO08 PAD_CTRL_PU_22k
> + >;
> + };
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> + >;
> + };
> + pinctrl_enet_ctrl: enet_ctrlgrp {
> + fsl,pins = <
> + /* Ethernet PHY reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
> + /* Ethernet PHY interrupt */
> + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1
> + >;
> + };
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> + pinctrl_ipu2_vdac: ipu2vdacgrp {
> + fsl,pins = <
> + MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
> + MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1
> + MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1
> + MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1
> + MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9
> + MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9
> + MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9
> + MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9
> + MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9
> + MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9
> + MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9
> + MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9
> + MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9
> + MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9
> + MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9
> + MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9
> + MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9
> + MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9
> + MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9
> + MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9
> + >;
> + };
> + pinctrl_regulator_usbhub_pwr: gpio_regulator_usbhub_pwr {
> + fsl,pins = <
> + /* USBH_HUB_EN */
> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 PAD_CTRL_PU_22k
> + >;
> + };
> + pinctrl_reset_moci: gpio_reset_moci {
> + fsl,pins = <
> + /* RESET_MOCI control */
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28
> + PAD_CTRL_PU_22k
> + >;
> + };
> + pinctrl_touch_int: touch_intgrp {
> + fsl,pins = <
> + /* STMPE811 interrupt */
> + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 PAD_CTRL_HYS_PU
> + >;
> + };
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> + >;
> + };
> + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { /* 100Mhz */
I do not have a strong opinion on comments, but if they are pure
duplication of what is already there, I kind of prefer to not add
them...
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
> + >;
> + };
> + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { /* 200Mhz */
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
> + >;
> + };
> + };
> +
> + ipu1 {
> + pinctrl_ipu1_lcdif: ipu1lcdifgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61
> + /* DE */
> + MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61
> + /* HSync */
> + MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61
> + /* VSync */
> + MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61
> + MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61
> + MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61
> + MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61
> + MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61
> + MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61
> + MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61
> + MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61
> + MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61
> + MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61
> + MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61
> + MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61
> + MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61
> + MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61
> + MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61
> + MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61
> + MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61
> + MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61
> + MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61
> + MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61
> + MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61
> + MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61
> + MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61
> + MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61
> + MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61
> + >;
> + };
> + pinctrl_cam_mclk: cam_mclk {
> + fsl,pins = <
> + /* CAM sys_mclk */
> + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
> + >;
> + };
> + pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1
> + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1
> + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1
> + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1
> + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1
> + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1
> + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1
> + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1
> + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
> + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1
> + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1
> + >;
> + };
> + };
> +
> + pwm {
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
> + >;
> + };
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
> + >;
> + };
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
> + >;
> + };
> + pinctrl_pwm4: pwm4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
> + >;
> + };
> + };
> +
> + spdif {
> + pinctrl_spdif: spdifgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
> + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
> + >;
> + };
> + };
> +
> + uart1 {
> + pinctrl_uart1_dce: uart1-dcegrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + /* DTE mode */
> + pinctrl_uart1_dte: uart1-dtegrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
> + >;
> + };
> +
> + /* Additional DTR, DSR, DCD */
> + pinctrl_uart1_ctrl: uart1-ctrlgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
> + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
> + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
> + >;
> + };
> + };
> +
> + uart2 {
> + pinctrl_uart2_dce: uart2-dcegrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
> + >;
> + };
> +
> + /* DTE mode */
> + pinctrl_uart2_dte: uart2grp-dte {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
> + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
> + >;
> + };
> + };
> +
> + uart4 {
> + pinctrl_uart4_dce: uart4-dcegrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + /* DTE mode */
> + pinctrl_uart4_dte: uart4-dtegrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
> + >;
> + };
> + };
> +
> + uart5 {
> + pinctrl_uart5_dce: uart5-dcegrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + /* DTE mode */
> + pinctrl_uart5_dte: uart5-dtegrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
> + >;
> + };
> + };
> +
> + usbh {
> + pinctrl_regulator_usbh_pwr: gpio_regulator_usbh_pwr {
> + fsl,pins = <
> + /* USBH_EN */
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 PAD_CTRL_PU_22k
> + >;
> + };
> + };
> +
> + usbotg {
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> + >;
> + };
> + pinctrl_regulator_usbotg_pwr: gpio_regulator_usbotg_pwr {
> + fsl,pins = <
> + /* USBO power en */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 PAD_CTRL_PU_22k
> + >;
> + };
> + };
> +
> + usdhc {
> + pinctrl_mmc_cd: gpio_mmc_cd {
> + fsl,pins = <
> + /* MMC1 CD */
> + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
> + >;
> + };
> + pinctrl_sd_cd: gpio_sd_cd {
> + fsl,pins = <
> + /* SD1 CD */
> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
> + >;
> + };
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
> + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
> + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
> + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
> + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
> + >;
> + };
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
> + >;
> + };
> + };
> +};
> +
> +&ldb {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "disabled";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "disabled";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "disabled";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> + status = "disabled";
> +};
> +
> +&spdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spdif>;
> + status = "disabled";
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
> + fsl,dte-mode;
> + fsl,uart-has-rtscts;
> + status = "disabled";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2_dte>;
> + fsl,dte-mode;
> + fsl,uart-has-rtscts;
> + status = "disabled";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4_dte>;
> + fsl,dte-mode;
> + status = "disabled";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5_dte>;
> + fsl,dte-mode;
> + status = "disabled";
> +};
> +
> +&usbh1 {
> + vbus-supply = <®_usb_host_vbus>;
> + status = "disabled";
> +};
> +
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "disabled";
> +};
> +
> +/* MMC1 */
> +&usdhc1 {
> + label = "MMC1";
This...
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
> + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_3p3v>;
> + bus-width = <8>;
> + voltage-ranges = <3300 3300>;
> + status = "disabled";
> +};
> +
> +/* SD1 */
> +&usdhc2 {
> + label = "SD1";
...and this seem not to be specified upstream? (at least not in
Documentation/devicetree/bindings/mmc/mmc.txt?)
Not sure about this... Or is label a common convention and hence
available for all nodes?
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
> + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_3p3v>;
> + bus-width = <4>;
> + voltage-ranges = <3300 3300>;
> + status = "disabled";
> +};
> +
> +/* eMMC */
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + vmmc-supply = <®_3p3v>;
> + bus-width = <8>;
> + voltage-ranges = <3300 3300>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&weim {
> + status = "disabled"; /* weim signals not accessible on i.MX6 */
They are accessible on the i.MX6 SoC.. but maybe "on Apalis iMX6Q/D". Or
just remove the comment, since that is kind of what disabled says?
> +};
Otherwise:
Reviewed-by: Stefan Agner <stefan@agner.ch>
--
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Petr Štetiar <ynezz@true.cz> |
|---|---|
| Date | 2016-01-08 10:00 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qOB3P-4hQ-5@gated-at.bofh.it> |
| In reply to | #1301699 |
> + i2cddc: i2c@0 {
> + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> + >;
According to one of the comments, it should be changed to the following:
sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-- ynezz
[toc] | [prev] | [next] | [standalone]
| From | Marcel Ziswiler <marcel.ziswiler@toradex.com> |
|---|---|
| Date | 2016-01-08 12:20 +0100 |
| Subject | Re: [PATCH v2 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Message-ID | <qODfk-5UZ-31@gated-at.bofh.it> |
| In reply to | #1304281 |
On Fri, 2016-01-08 at 09:57 +0100, Petr Štetiar wrote:
> > + i2cddc: i2c@0 {
> > + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> > + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> > + >;
>
> According to one of the comments, it should be changed to the
> following:
>
> sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
> scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
No, I believe you mixed the i2c-imx binding with the i2c-gpio one [2].
> -- ynezz
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/i2c/i2c-imx.txt
[2] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
Cheers
Marcel
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web