Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1302555 > unrolled thread

[PATCH 3.16.y-ckt 107/126] can: sja1000: clear interrupts on start

Started byLuis Henriques <luis.henriques@canonical.com>
First post2016-01-06 11:50 +0100
Last post2016-01-06 11:50 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 3.16.y-ckt 107/126] can: sja1000: clear interrupts on start Luis Henriques <luis.henriques@canonical.com> - 2016-01-06 11:50 +0100

#1302555 — [PATCH 3.16.y-ckt 107/126] can: sja1000: clear interrupts on start

FromLuis Henriques <luis.henriques@canonical.com>
Date2016-01-06 11:50 +0100
Subject[PATCH 3.16.y-ckt 107/126] can: sja1000: clear interrupts on start
Message-ID<qNTPc-8o8-11@gated-at.bofh.it>
3.16.7-ckt22 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mirza Krak <mirza.krak@hostmobility.com>

commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.

Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Reported-by: Christian Magnusson <Christian.Magnusson@semcon.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/can/sja1000/sja1000.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f31499a32d7d..052b4edaab43 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -183,6 +183,9 @@ static void sja1000_start(struct net_device *dev)
 	priv->write_reg(priv, SJA1000_RXERR, 0x0);
 	priv->read_reg(priv, SJA1000_ECC);
 
+	/* clear interrupt flags */
+	priv->read_reg(priv, SJA1000_IR);
+
 	/* leave reset mode */
 	set_normal_mode(dev);
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web