Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1301623 > unrolled thread

[PATCH 4/4] mfd: arizona: Add device tree binding documentation for new clock driver

Started byCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
First post2016-01-05 16:50 +0100
Last post2016-01-05 16:50 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 4/4] mfd: arizona: Add device tree binding documentation for new clock driver Charles Keepax <ckeepax@opensource.wolfsonmicro.com> - 2016-01-05 16:50 +0100

#1301623 — [PATCH 4/4] mfd: arizona: Add device tree binding documentation for new clock driver

FromCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date2016-01-05 16:50 +0100
Subject[PATCH 4/4] mfd: arizona: Add device tree binding documentation for new clock driver
Message-ID<qNC1X-4OF-7@gated-at.bofh.it>
Specify the device tree binding for the input clocks to Arizona devices.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 18be0cb..39f76f8 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -45,6 +45,13 @@ Optional properties:
 
   - wlf,reset : GPIO specifier for the GPIO controlling /RESET
 
+  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
+  - clock-names: Should contains two strings:
+      "mclk1" for the clock supplied on MCLK1, recommended to be a high
+      quality audio reference clock
+      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
+      32k clock
+
   - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
     for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
     absent, no configuration of these registers is performed. If any entry has
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web