Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1298203 > unrolled thread

[PATCH] iio: qcom-spmi-vadc: One check less in vadc_measure_ref_points() after error detection

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH] iio: qcom-spmi-vadc: One check less in  vadc_measure_ref_points() after error detection SF Markus Elfring <elfring@users.sourceforge.net> - 2015-12-26 14:10 +0100

#1298203 — [PATCH] iio: qcom-spmi-vadc: One check less in vadc_measure_ref_points() after error detection

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 26 Dec 2015 13:53:15 +0100

This issue was detected by using the Coccinelle software.

Move the jump label directly before the desired log statement
so that the variable "ret" does not need to be checked once more
after it was determined that a function call failed.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/iio/adc/qcom-spmi-vadc.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index c2babe5..391eefa 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -424,7 +424,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	prop = vadc_get_channel(vadc, VADC_REF_1250MV);
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	/* Try with buffered 625mV channel first */
 	prop = vadc_get_channel(vadc, VADC_SPARE1);
@@ -433,11 +433,11 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		goto report_failure;
 	}
 
 	vadc->graph[VADC_CALIB_ABSOLUTE].dy = read_1 - read_2;
@@ -447,23 +447,24 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	prop = vadc_get_channel(vadc, VADC_VDD_VADC);
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	prop = vadc_get_channel(vadc, VADC_GND_REF);
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		goto report_failure;
 	}
 
 	vadc->graph[VADC_CALIB_RATIOMETRIC].dy = read_1 - read_2;
 	vadc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_2;
-err:
-	if (ret)
+	if (ret) {
+report_failure:
 		dev_err(vadc->dev, "measure reference points failed\n");
+	}
 
 	return ret;
 }
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web