Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1296782 > unrolled thread

[PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a

Back to article view | Back to linux.kernel

Contents

  [PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a Rameshwar Prasad Sahu <rsahu@apm.com> - 2015-12-22 14:30 +0100

#1296782 — [PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a

The Arason SD host controller supports set block count command (cmd23)
and high speed mode. This patch re-enable both of these features that
was disabled. For device that doesn't support high speed, it should
configure its capability register accordingly instead disables it
explicitly.

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
 drivers/mmc/host/sdhci-of-arasan.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 75379cb..5d9fdb3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -172,11 +172,6 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 		goto clk_disable_all;
 	}

-	if (of_device_is_compatible(pdev->dev.of_node, "arasan,sdhci-4.9a")) {
-		host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
-		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
-	}
-
 	sdhci_get_of_property(pdev);
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = sdhci_arasan;
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web