Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1297672 > unrolled thread

[PATCH v2 2/3] clocksource/vt8500: Remove the 'loops' variable

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 2/3] clocksource/vt8500: Remove the 'loops' variable Roman Volkov <v1ron@mail.ru> - 2015-12-23 23:20 +0100

#1297672 — [PATCH v2 2/3] clocksource/vt8500: Remove the 'loops' variable

From: Roman Volkov <rvolkov@v1ros.org>

The purpose of the 'loops' variable is unclear. vt8500 hardware does not
require any protections, in case if these variables intended for preventing
infinite loops (identical PXA timer works perfectly without these ones).

Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
---
 drivers/clocksource/vt8500_timer.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index dfc3bb4..eb08d96 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -48,18 +48,14 @@
 #define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
 #define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
 
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
 #define MIN_OSCR_DELTA		16
 
 static void __iomem *regbase;
 
 static cycle_t vt8500_timer_read(struct clocksource *cs)
 {
-	int loops = msecs_to_loops(10);
 	writel(3, regbase + TIMER_CTRL_VAL);
-	while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
-						&& --loops)
+	while (readl(regbase + TIMER_AS_VAL) & TIMER_COUNT_R_ACTIVE)
 		cpu_relax();
 	return readl(regbase + TIMER_COUNT_VAL);
 }
@@ -75,10 +71,8 @@ static struct clocksource clocksource = {
 static int vt8500_timer_set_next_event(unsigned long cycles,
 				    struct clock_event_device *evt)
 {
-	int loops = msecs_to_loops(10);
 	cycle_t alarm = clocksource.read(&clocksource) + cycles;
-	while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
-						&& --loops)
+	while (readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
 		cpu_relax();
 	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
 
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web