Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1295760 > unrolled thread

Re: [PATCH 2/3] thermal: Add Mediatek thermal controller support

Started byDaniel Kurtz <djkurtz@chromium.org>
First post2015-12-21 05:10 +0100
Last post2015-12-21 05:10 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH 2/3] thermal: Add Mediatek thermal controller support Daniel Kurtz <djkurtz@chromium.org> - 2015-12-21 05:10 +0100

#1295760 — Re: [PATCH 2/3] thermal: Add Mediatek thermal controller support

FromDaniel Kurtz <djkurtz@chromium.org>
Date2015-12-21 05:10 +0100
SubjectRe: [PATCH 2/3] thermal: Add Mediatek thermal controller support
Message-ID<qHZXj-1AH-1@gated-at.bofh.it>
Hi Sascha,

One nit below that can be fixed up later, or now if you don't plan to
spin this driver to
address Eduardo's feedback...

On Mon, Nov 30, 2015 at 7:42 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> This adds support for the Mediatek thermal controller found on MT8173
> and likely other SoCs.
> The controller is a bit special. It does not have its own ADC, instead
> it controls the on-SoC AUXADC via AHB bus accesses. For this reason
> we need the physical address of the AUXADC. Also it controls a mux
> using AHB bus accesses, so we need the APMIXEDSYS physical address aswell.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

[snip]

> +static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
> +{
> +       struct nvmem_cell *cell;
> +       u32 *buf;
> +       size_t len;
> +       int i, ret = 0;
> +
> +       /* Start with default values */
> +       mt->adc_ge = 512;
> +       for (i = 0; i < MT8173_NUM_SENSORS; i++)
> +               mt->vts[i] = 260;
> +       mt->degc_cali = 40;
> +       mt->o_slope = 0;
> +
> +       cell = nvmem_cell_get(dev, "calibration-data");
> +       if (IS_ERR(cell)) {
> +               if (PTR_ERR(cell) == -EPROBE_DEFER)

It is useful to know why the thermal driver is being probe defered, so
I suggest here:
dev_warn(dev, "Waiting for calibration data.\n");

> +                       return PTR_ERR(cell);
> +               return 0;
> +       }

Thanks,
-Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web