Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1286394 > unrolled thread

[PATCH v2] irqchip: omap-intc: add support for spurious irq handling

Back to article view | Back to linux.kernel

Contents

  [PATCH v2] irqchip: omap-intc: add support for spurious irq handling Sekhar Nori <nsekhar@ti.com> - 2015-12-08 12:10 +0100
    Re: [PATCH v2] irqchip: omap-intc: add support for spurious irq handling Felipe Balbi <balbi@ti.com> - 2015-12-08 14:50 +0100
      Re: [PATCH v2] irqchip: omap-intc: add support for spurious irq  handling Sekhar Nori <nsekhar@ti.com> - 2015-12-10 16:20 +0100

#1286394 — [PATCH v2] irqchip: omap-intc: add support for spurious irq handling

Under some conditions, irq sorting procedure used
by INTC can go wrong resulting in a spurious irq
getting reported.

If this condition is not handled, it results in
endless stream of:

    unexpected IRQ trap at vector 00

messages from ack_bad_irq()

Handle the spurious interrupt condition in omap-intc
driver to prevent this.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
v2: increment error irq counter, use pr_err_once,
    add a comment on tips to debug spurious irq
    condition.

This patch results in a checkpatch warning about
extern definition of irq_err_count, but looks like
thats the prevalent method of accessing that counter.

 drivers/irqchip/irq-omap-intc.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c
index 8587d0f8d8c0..639708de5529 100644
--- a/drivers/irqchip/irq-omap-intc.c
+++ b/drivers/irqchip/irq-omap-intc.c
@@ -47,6 +47,7 @@
 #define INTC_ILR0		0x0100
 
 #define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+#define SPURIOUSIRQ_MASK	(0x1ffffff << 7)
 #define INTCPS_NR_ILR_REGS	128
 #define INTCPS_NR_MIR_REGS	4
 
@@ -330,11 +331,35 @@ static int __init omap_init_irq(u32 base, struct device_node *node)
 static asmlinkage void __exception_irq_entry
 omap_intc_handle_irq(struct pt_regs *regs)
 {
+	extern unsigned long irq_err_count;
 	u32 irqnr;
 
 	irqnr = intc_readl(INTC_SIR);
+
+	/*
+	 * A spurious IRQ can result if interrupt that triggered the
+	 * sorting is no longer active during the sorting (10 INTC
+	 * functional clock cycles after interrupt assertion). Or a
+	 * change in interrupt mask affected the result during sorting
+	 * time. There is no special handling required except ignoring
+	 * the SIR register value just read and retrying.
+	 * See section 6.2.5 of AM335x TRM Literature Number: SPRUH73K
+	 *
+	 * Many a times, a spurious interrupt situation has been fixed
+	 * by adding a flush for the posted write acking the IRQ in
+	 * the device driver. Typically, this is going be the device
+	 * driver whose interrupt was handled just before the spurious
+	 * IRQ occurred. Pay attention to those device drivers if you
+	 * run into hitting the spurious IRQ condition below.
+	 */
+	if ((irqnr & SPURIOUSIRQ_MASK) == SPURIOUSIRQ_MASK) {
+		pr_err_once("%s: spurious irq!\n", __func__);
+		irq_err_count++;
+		omap_ack_irq(NULL);
+		return;
+	}
+
 	irqnr &= ACTIVEIRQ_MASK;
-	WARN_ONCE(!irqnr, "Spurious IRQ ?\n");
 	handle_domain_irq(domain, irqnr, regs);
 }
 
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1286494

[Multipart message — attachments visible in raw view] — view raw

Hi,

Sekhar Nori <nsekhar@ti.com> writes:
> Under some conditions, irq sorting procedure used
> by INTC can go wrong resulting in a spurious irq
> getting reported.
>
> If this condition is not handled, it results in
> endless stream of:
>
>     unexpected IRQ trap at vector 00
>
> messages from ack_bad_irq()
>
> Handle the spurious interrupt condition in omap-intc
> driver to prevent this.
>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
> v2: increment error irq counter, use pr_err_once,
>     add a comment on tips to debug spurious irq
>     condition.
>
> This patch results in a checkpatch warning about
> extern definition of irq_err_count, but looks like
> thats the prevalent method of accessing that counter.
>
>  drivers/irqchip/irq-omap-intc.c | 27 ++++++++++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c
> index 8587d0f8d8c0..639708de5529 100644
> --- a/drivers/irqchip/irq-omap-intc.c
> +++ b/drivers/irqchip/irq-omap-intc.c
> @@ -47,6 +47,7 @@
>  #define INTC_ILR0		0x0100
>  
>  #define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
> +#define SPURIOUSIRQ_MASK	(0x1ffffff << 7)
>  #define INTCPS_NR_ILR_REGS	128
>  #define INTCPS_NR_MIR_REGS	4
>  
> @@ -330,11 +331,35 @@ static int __init omap_init_irq(u32 base, struct device_node *node)
>  static asmlinkage void __exception_irq_entry
>  omap_intc_handle_irq(struct pt_regs *regs)
>  {
> +	extern unsigned long irq_err_count;
>  	u32 irqnr;
>  
>  	irqnr = intc_readl(INTC_SIR);
> +
> +	/*
> +	 * A spurious IRQ can result if interrupt that triggered the
> +	 * sorting is no longer active during the sorting (10 INTC
> +	 * functional clock cycles after interrupt assertion). Or a
> +	 * change in interrupt mask affected the result during sorting
> +	 * time. There is no special handling required except ignoring
> +	 * the SIR register value just read and retrying.
> +	 * See section 6.2.5 of AM335x TRM Literature Number: SPRUH73K
> +	 *
> +	 * Many a times, a spurious interrupt situation has been fixed
> +	 * by adding a flush for the posted write acking the IRQ in
> +	 * the device driver. Typically, this is going be the device
> +	 * driver whose interrupt was handled just before the spurious
> +	 * IRQ occurred. Pay attention to those device drivers if you
> +	 * run into hitting the spurious IRQ condition below.
> +	 */
> +	if ((irqnr & SPURIOUSIRQ_MASK) == SPURIOUSIRQ_MASK) {

sounds like unlikely() wouldn't hurt here.

> +		pr_err_once("%s: spurious irq!\n", __func__);
> +		irq_err_count++;
> +		omap_ack_irq(NULL);
> +		return;
> +	}
> +
>  	irqnr &= ACTIVEIRQ_MASK;
> -	WARN_ONCE(!irqnr, "Spurious IRQ ?\n");
>  	handle_domain_irq(domain, irqnr, regs);

care to run kernel function profiler against omap_intc_handle_irq()
before and after this patch ?

-- 
balbi

[toc] | [prev] | [next] | [standalone]

#1288583 — Re: [PATCH v2] irqchip: omap-intc: add support for spurious irq handling

Hi Felipe,

On Tuesday 08 December 2015 07:15 PM, Felipe Balbi wrote:
> Sekhar Nori <nsekhar@ti.com> writes:

>> +	/*
>> +	 * A spurious IRQ can result if interrupt that triggered the
>> +	 * sorting is no longer active during the sorting (10 INTC
>> +	 * functional clock cycles after interrupt assertion). Or a
>> +	 * change in interrupt mask affected the result during sorting
>> +	 * time. There is no special handling required except ignoring
>> +	 * the SIR register value just read and retrying.
>> +	 * See section 6.2.5 of AM335x TRM Literature Number: SPRUH73K
>> +	 *
>> +	 * Many a times, a spurious interrupt situation has been fixed
>> +	 * by adding a flush for the posted write acking the IRQ in
>> +	 * the device driver. Typically, this is going be the device
>> +	 * driver whose interrupt was handled just before the spurious
>> +	 * IRQ occurred. Pay attention to those device drivers if you
>> +	 * run into hitting the spurious IRQ condition below.
>> +	 */
>> +	if ((irqnr & SPURIOUSIRQ_MASK) == SPURIOUSIRQ_MASK) {
> 
> sounds like unlikely() wouldn't hurt here.

I can add, but looks like it does not make a big difference. See below.

> 
>> +		pr_err_once("%s: spurious irq!\n", __func__);
>> +		irq_err_count++;
>> +		omap_ack_irq(NULL);
>> +		return;
>> +	}
>> +
>>  	irqnr &= ACTIVEIRQ_MASK;
>> -	WARN_ONCE(!irqnr, "Spurious IRQ ?\n");
>>  	handle_domain_irq(domain, irqnr, regs);
> 
> care to run kernel function profiler against omap_intc_handle_irq()
> before and after this patch ?

Before this patch I see average running time time of 34us. That
increases to 37.8us after this patch. With unlikely() the number I got
was 37.4us. So the benefit with unlikely() is in the noise range.

This was using AM335x EVM at 720 MHz.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web