Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1283227 > unrolled thread
| Started by | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| First post | 2015-12-03 19:10 +0100 |
| Last post | 2015-12-04 15:40 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 2/2] ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi Javier Martinez Canillas <javier@osg.samsung.com> - 2015-12-03 19:10 +0100
Re: [PATCH 2/2] ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi Enric Balletbo Serra <eballetbo@gmail.com> - 2015-12-04 15:40 +0100
| From | Javier Martinez Canillas <javier@osg.samsung.com> |
|---|---|
| Date | 2015-12-03 19:10 +0100 |
| Subject | [PATCH 2/2] ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi |
| Message-ID | <qBGul-98-7@gated-at.bofh.it> |
When the WiFi support was added to the IGEP0030 board, the MMC subsystem
did not provide a mechanism to define power sequence providers. So a DT
hack was used to toggle the WiFi chip reset and power down pins by using
fake fixed regulators whose enable GPIO was the GPIOs connected to these
pins.
But now the simple MMC power sequence provider can be used for this and
the workaround removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/omap3-igep0030.dts | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 468608dab30a..55b0cc4f5ee5 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -15,25 +15,17 @@
model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
- lbee1usjyc_pdn: lbee1usjyc_pdn {
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
};
- /* Regulator to trigger the RESET_N_W signal of the Wifi module */
- lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-reset-n-w";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
- enable-active-high;
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
};
};
@@ -62,8 +54,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&lbee1usjyc_pdn>;
- vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Enric Balletbo Serra <eballetbo@gmail.com> |
|---|---|
| Date | 2015-12-04 15:40 +0100 |
| Message-ID | <qBZGG-3Ud-5@gated-at.bofh.it> |
| In reply to | #1283227 |
2015-12-03 19:02 GMT+01:00 Javier Martinez Canillas <javier@osg.samsung.com>:
> When the WiFi support was added to the IGEP0030 board, the MMC subsystem
> did not provide a mechanism to define power sequence providers. So a DT
> hack was used to toggle the WiFi chip reset and power down pins by using
> fake fixed regulators whose enable GPIO was the GPIOs connected to these
> pins.
>
> But now the simple MMC power sequence provider can be used for this and
> the workaround removed.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> ---
>
> arch/arm/boot/dts/omap3-igep0030.dts | 24 ++++++++----------------
> 1 file changed, 8 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
> index 468608dab30a..55b0cc4f5ee5 100644
> --- a/arch/arm/boot/dts/omap3-igep0030.dts
> +++ b/arch/arm/boot/dts/omap3-igep0030.dts
> @@ -15,25 +15,17 @@
> model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
> compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
>
> - /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
> - lbee1usjyc_pdn: lbee1usjyc_pdn {
> + vmmcsdio_fixed: fixedregulator-mmcsdio {
> compatible = "regulator-fixed";
> - regulator-name = "regulator-lbee1usjyc-pdn";
> + regulator-name = "vmmcsdio_fixed";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
> - startup-delay-us = <10000>;
> - enable-active-high;
> };
>
> - /* Regulator to trigger the RESET_N_W signal of the Wifi module */
> - lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
> - compatible = "regulator-fixed";
> - regulator-name = "regulator-lbee1usjyc-reset-n-w";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
> - enable-active-high;
> + mmc2_pwrseq: mmc2_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
> + <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
> };
> };
>
> @@ -62,8 +54,8 @@
> &mmc2 {
> pinctrl-names = "default";
> pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
> - vmmc-supply = <&lbee1usjyc_pdn>;
> - vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
> + vmmc-supply = <&vmmcsdio_fixed>;
> + mmc-pwrseq = <&mmc2_pwrseq>;
> bus-width = <4>;
> non-removable;
> };
> --
> 2.4.3
>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web