Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1281414 > unrolled thread
| Started by | Shawn Guo <shawnguo@kernel.org> |
|---|---|
| First post | 2015-12-02 03:10 +0100 |
| Last post | 2015-12-02 03:50 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v2] arm64: dts: add all hi6220 i2c nodes Shawn Guo <shawnguo@kernel.org> - 2015-12-02 03:10 +0100
Re: [PATCH v2] arm64: dts: add all hi6220 i2c nodes Xinwei Kong <kong.kongxinwei@hisilicon.com> - 2015-12-02 03:50 +0100
| From | Shawn Guo <shawnguo@kernel.org> |
|---|---|
| Date | 2015-12-02 03:10 +0100 |
| Subject | Re: [PATCH v2] arm64: dts: add all hi6220 i2c nodes |
| Message-ID | <qB51L-XZ-3@gated-at.bofh.it> |
On Thu, Nov 26, 2015 at 03:57:03PM +0800, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..85d4a8b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + i2c0: i2c@f7100000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7100000 0x0 0x1000>;
> + interrupts = <0 44 4>;
> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> + clock-names = "clk_i2c0";
Neither bindings doc i2c-designware.txt defines this property, nor
kernel i2c-designware driver uses this property. So I think this
clock-names property can just be dropped.
Otherwise, the patch looks good to me.
Shawn
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@f7101000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7101000 0x0 0x1000>;
> + interrupts = <0 45 4>;
> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> + clock-names = "clk_i2c1";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@f7102000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7102000 0x0 0x1000>;
> + interrupts = <0 46 4>;
> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> + clock-names = "clk_i2c2";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> + status = "disabled";
> + };
> +
> };
> };
> --
> 1.9.1
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Xinwei Kong <kong.kongxinwei@hisilicon.com> |
|---|---|
| Date | 2015-12-02 03:50 +0100 |
| Message-ID | <qB5Eu-1am-9@gated-at.bofh.it> |
| In reply to | #1281414 |
hi Shawn
On 2015/12/2 10:05, Shawn Guo wrote:
> On Thu, Nov 26, 2015 at 03:57:03PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..85d4a8b 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,42 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + clock-names = "clk_i2c0";
>
> Neither bindings doc i2c-designware.txt defines this property, nor
> kernel i2c-designware driver uses this property. So I think this
> clock-names property can just be dropped.
>
This property should been delete it. I will debug it in HiKey board then
send v3 patch.
Thank you
xinwei
> Otherwise, the patch looks good to me.
>
> Shawn
>
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + interrupts = <0 45 4>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + clock-names = "clk_i2c1";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + interrupts = <0 46 4>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + clock-names = "clk_i2c2";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>> --
>> 1.9.1
>>
>>
>>
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web