Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1280658 > unrolled thread
| Started by | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| First post | 2015-12-01 10:00 +0100 |
| Last post | 2015-12-01 10:00 +0100 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi Maxime Ripard <maxime.ripard@free-electrons.com> - 2015-12-01 10:00 +0100
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Date | 2015-12-01 10:00 +0100 |
| Subject | Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi |
| Message-ID | <qAOX0-7lw-13@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
Hi!
On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> + reg = <0x01c20800 0x400>;
> >> + clocks = <&osc24M>;
> >> + gpio-controller;
> >> + interrupt-controller;
> >> + #interrupt-cells = <3>;
> >> + #gpio-cells = <3>;
> >> +
> >> + i2c0_pins_a: i2c0@0 {
> >> + allwinner,pins = "PH0", "PH1";
> >> + allwinner,function = "i2c0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + i2c1_pins_a: i2c1@0 {
> >> + allwinner,pins = "PH2", "PH3";
> >> + allwinner,function = "i2c1";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + i2c2_pins_a: i2c2@0 {
> >> + allwinner,pins = "PH4", "PH5";
> >> + allwinner,function = "i2c2";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc0_pins_a: mmc0@0 {
> >> + allwinner,pins = "PF0", "PF1", "PF2",
> >> + "PF3", "PF4", "PF5";
> >> + allwinner,function = "mmc0";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc1_pins_a: mmc1@0 {
> >> + allwinner,pins = "PG0", "PG1", "PG2",
> >> + "PG3", "PG4", "PG5";
> >> + allwinner,function = "mmc1";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc2_8bit_pins: mmc2_8bit {
> >> + allwinner,pins = "PC5", "PC6", "PC8",
> >> + "PC9", "PC10", "PC11",
> >> + "PC12", "PC13", "PC14",
> >> + "PC15";
> >> + allwinner,function = "mmc2";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + uart0_pins_a: uart0@0 {
> >> + allwinner,pins = "PF2", "PF4";
> >> + allwinner,function = "uart0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + uart0_pins_b: uart0@1 {
> >> + allwinner,pins = "PB9", "PB10";
> >> + allwinner,function = "uart0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.
It bloats the DT for no particular reason.
> Let me know in case you want to remove, I'll do it.
Yes, please.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Back to top | Article view | linux.kernel
csiph-web