Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1280078 > unrolled thread
| Started by | Paul Burton <paul.burton@imgtec.com> |
|---|---|
| First post | 2015-11-30 17:30 +0100 |
| Last post | 2015-12-01 03:00 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 20/28] net: pch_gbe: clear interrupt FIFO during probe Paul Burton <paul.burton@imgtec.com> - 2015-11-30 17:30 +0100
Re: [PATCH 20/28] net: pch_gbe: clear interrupt FIFO during probe Florian Fainelli <f.fainelli@gmail.com> - 2015-12-01 03:00 +0100
| From | Paul Burton <paul.burton@imgtec.com> |
|---|---|
| Date | 2015-11-30 17:30 +0100 |
| Subject | [PATCH 20/28] net: pch_gbe: clear interrupt FIFO during probe |
| Message-ID | <qAzuY-5YC-57@gated-at.bofh.it> |
xilinx_pcie_init_port clears the pending interrupts in the interrupt
decode register, but does not clear the interrupt FIFO. This would lead
to spurious interrupts if any were present in the FIFO at probe time.
Clear the interrupt FIFO prior to the interrupt decode register in order
to start with a clean slate as expected.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
drivers/pci/host/pcie-xilinx.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index ac9da72..0edb612 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -566,6 +566,8 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
*/
static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
{
+ u32 val;
+
if (xilinx_pcie_link_is_up(port))
dev_info(port->dev, "PCIe Link is UP\n");
else
@@ -575,6 +577,17 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
XILINX_PCIE_REG_IMR);
+ /* Clear interrupt FIFO */
+ while (1) {
+ val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+ if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID))
+ break;
+
+ pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+ XILINX_PCIE_REG_RPIFR1);
+ }
+
/* Clear pending interrupts */
pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
XILINX_PCIE_IMR_ALL_MASK,
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| Date | 2015-12-01 03:00 +0100 |
| Message-ID | <qAIoy-360-19@gated-at.bofh.it> |
| In reply to | #1280078 |
On 30/11/15 08:21, Paul Burton wrote: > xilinx_pcie_init_port clears the pending interrupts in the interrupt > decode register, but does not clear the interrupt FIFO. This would lead > to spurious interrupts if any were present in the FIFO at probe time. > Clear the interrupt FIFO prior to the interrupt decode register in order > to start with a clean slate as expected. > > Signed-off-by: Paul Burton <paul.burton@imgtec.com> Seems like the subject should be "PCI: xilinx: ..." to be consistent with the changes you are making to this driver earlier in the series? -- Florian -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web