Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1225616 > unrolled thread

[PATCH 4/8] PCI: iproc: Fix PCIe reset logic

Started byRay Jui <rjui@broadcom.com>
First post2015-09-16 02:40 +0200
Last post2015-09-16 02:40 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 4/8] PCI: iproc: Fix PCIe reset logic Ray Jui <rjui@broadcom.com> - 2015-09-16 02:40 +0200

#1225616 — [PATCH 4/8] PCI: iproc: Fix PCIe reset logic

FromRay Jui <rjui@broadcom.com>
Date2015-09-16 02:40 +0200
Subject[PATCH 4/8] PCI: iproc: Fix PCIe reset logic
Message-ID<q98Vs-5ap-11@gated-at.bofh.it>
The current iProc PCIe reset logic does not always properly reset the
device. For example, in the case when the perst_b signal is already
de-asserted in the bootloader, the current reset logic fails to trigger
a proper asssert -> de-assert reset sequence. This patch fixes the issue
by always triggering the proper reset sequence

This patch also explicitly selects the desired reset source, i.e.,
perst_b and reduces the wait time after the device comes out of reset
from 250 ms to 100 ms, based on recommendation from the ASIC team

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Vladimir Dreizin <vdreizin@broadcom.com>
Reviewed-by: Trac Hoang <trhoang@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Vladimir Dreizin <vdreizin@broadcom.com>
Tested-by: Darren Edamura <dedamura@broadcom.com>
---
 drivers/pci/host/pcie-iproc.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 52e7ff2..80e0541 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -31,6 +31,8 @@
 #include "pcie-iproc.h"
 
 #define CLK_CONTROL_OFFSET           0x000
+#define EP_PERST_SOURCE_SELECT_SHIFT 2
+#define EP_PERST_SOURCE_SELECT       BIT(EP_PERST_SOURCE_SELECT_SHIFT)
 #define EP_MODE_SURVIVE_PERST_SHIFT  1
 #define EP_MODE_SURVIVE_PERST        BIT(EP_MODE_SURVIVE_PERST_SHIFT)
 #define RC_PCIE_RST_OUTPUT_SHIFT     0
@@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct iproc_pcie *pcie)
 	u32 val;
 
 	/*
-	 * Configure the PCIe controller as root complex and send a downstream
-	 * reset
+	 * Select perst_b signal as reset source. Put the device into reset,
+	 * and then bring it out of reset
 	 */
-	val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT;
+	val = readl(pcie->base + CLK_CONTROL_OFFSET);
+	val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
+		~RC_PCIE_RST_OUTPUT;
 	writel(val, pcie->base + CLK_CONTROL_OFFSET);
 	udelay(250);
-	val &= ~EP_MODE_SURVIVE_PERST;
+
+	val |= RC_PCIE_RST_OUTPUT;
 	writel(val, pcie->base + CLK_CONTROL_OFFSET);
-	msleep(250);
+	msleep(100);
 }
 
 static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web