Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1223621 > unrolled thread

Re: [PATCH] ARM: dts: Add the hdmi-ddc pinctrl settings for rk3288

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] ARM: dts: Add the hdmi-ddc pinctrl settings for rk3288 Heiko Stübner <heiko@sntech.de> - 2015-09-13 13:40 +0200

#1223621 — Re: [PATCH] ARM: dts: Add the hdmi-ddc pinctrl settings for rk3288

Am Mittwoch, 2. September 2015, 14:54:22 schrieb Douglas Anderson:
> The pins for i2c5 can either be configured as "I2C5" which means that
> they're controlled by the normal RK3288 I2C controller or as "EDP / HDMI
> I2C".  It's unclear why EDP is referenced here since apparently setting
> the mux to this position enables I2C communication using the dw_hdmi
> block with a patch like <https://patchwork.kernel.org/patch/7098101/>.
> 
> There appear to be some reasons why using the builtin I2C controller in
> dw_hdmi is better than using the normal RK3288 I2C controller, so boards
> based on rk3288 might eventually want to use this pinmux if it's known
> to work.
> 
> Once driver support in dw_hdmi lands, boards would use this by selecting
> this pinctrl for the HDMI block and then _not_ specifying a ddc-i2c-bus
> and _not_ setting the status to "okay" for i2c5 (which uses the same
> pins).
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

applied to my dts branch for 4.4


Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web