Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1224431 > unrolled thread

[PATCH v2 2/2] irqchip: gic: Document optional Clock and Power Domain properties

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 2/2] irqchip: gic: Document optional Clock and Power Domain properties Geert Uytterhoeven <geert+renesas@glider.be> - 2015-09-14 22:10 +0200
    Re: [PATCH v2 2/2] irqchip: gic: Document optional Clock and Power  Domain properties Rob Herring <robh@kernel.org> - 2015-09-15 21:00 +0200

#1224431 — [PATCH v2 2/2] irqchip: gic: Document optional Clock and Power Domain properties

Depending on the GIC variant, the GIC module has one or more clock
inputs. Document the optional "clocks" and "clock-names" properties,
and their possible values, based on the Technical Reference Manuals.
optional.

Add the optional "power-domains" property.

This will allow to describe in DT the relationship between the GIC and
the Clock and/or Power Domain topology on SoCs where this is relevant
and needed for proper operation.

Note: As the current GIC driver doesn't support Runtime PM yet, PM
Domain constraints must be handled elsewhere in e.g. platform code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Note: v1 was Acked-by: Rob Herring <robh@kernel.org>, but I didn't add
      it, due to the addition of clock-names.

v2:
  - Add "clock-names",
  - Document clock inputs on various GIC variants.

Clock inputs are based on the following documentation:
  - "ARM11 MPCore Processor Technical Reference Manual" (r2p0),
  - "Cortex-A9 MPCore Technical Reference Manual" (r4p1, r2p0),
  - "Cortex-A15 Technical Reference Manual" (r4p0, r2p0),
  - "CoreLink GIC-400 Generic Interrupt Controller Technical Reference
    Manual" (r0p1, r0p0),
  - "PrimeCell Generic Interrupt Controller (PL390) Technical Reference
    Manual" (r0p0).

I could not find clock input information in:
  - "ARM1176JZF Development Chip Technical Reference Manual" (r0p0),
  - "Cortex-A7 MPCore processors" (r0p5, r0p3).

Other:
  - "brcm,brahma-b15-gic" seems to be always used together with
    "arm,cortex-a15-gic".

No access to datasheets:
  - "qcom,msm-8660-qgic",
  - "qcom,msm-qgic2".
---
 Documentation/devicetree/bindings/arm/gic.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 24742853ba460223..cc56021eb60babea 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -59,6 +59,21 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
+- clocks        : List of phandle and clock-specific pairs, one for each entry
+  in clock-names.
+- clock-names   : List of names for the GIC clock input(s). Valid clock names
+  depend on the GIC variant:
+	"ic_clk" (for "arm,arm11mp-gic")
+	"PERIPHCLKEN" (for "arm,cortex-a15-gic")
+	"PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic")
+	"clk" (for "arm,gic-400")
+	"gclk" (for "arm,pl390")
+
+- power-domains : A phandle and PM domain specifier as defined by bindings of
+		  the power controller specified by phandle, used when the GIC
+		  is part of a Power or Clock Domain.
+
+
 Example:
 
 	intc: interrupt-controller@fff11000 {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1225507 — Re: [PATCH v2 2/2] irqchip: gic: Document optional Clock and Power Domain properties

On 09/14/2015 03:06 PM, Geert Uytterhoeven wrote:
> Depending on the GIC variant, the GIC module has one or more clock
> inputs. Document the optional "clocks" and "clock-names" properties,
> and their possible values, based on the Technical Reference Manuals.
> optional.
> 
> Add the optional "power-domains" property.
> 
> This will allow to describe in DT the relationship between the GIC and
> the Clock and/or Power Domain topology on SoCs where this is relevant
> and needed for proper operation.
> 
> Note: As the current GIC driver doesn't support Runtime PM yet, PM
> Domain constraints must be handled elsewhere in e.g. platform code.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Note: v1 was Acked-by: Rob Herring <robh@kernel.org>, but I didn't add
>       it, due to the addition of clock-names.

For both: ack.

> 
> v2:
>   - Add "clock-names",
>   - Document clock inputs on various GIC variants.
> 
> Clock inputs are based on the following documentation:
>   - "ARM11 MPCore Processor Technical Reference Manual" (r2p0),
>   - "Cortex-A9 MPCore Technical Reference Manual" (r4p1, r2p0),
>   - "Cortex-A15 Technical Reference Manual" (r4p0, r2p0),
>   - "CoreLink GIC-400 Generic Interrupt Controller Technical Reference
>     Manual" (r0p1, r0p0),
>   - "PrimeCell Generic Interrupt Controller (PL390) Technical Reference
>     Manual" (r0p0).
> 
> I could not find clock input information in:
>   - "ARM1176JZF Development Chip Technical Reference Manual" (r0p0),
>   - "Cortex-A7 MPCore processors" (r0p5, r0p3).
> 
> Other:
>   - "brcm,brahma-b15-gic" seems to be always used together with
>     "arm,cortex-a15-gic".
> 
> No access to datasheets:
>   - "qcom,msm-8660-qgic",
>   - "qcom,msm-qgic2".
> ---
>  Documentation/devicetree/bindings/arm/gic.txt | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index 24742853ba460223..cc56021eb60babea 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -59,6 +59,21 @@ Optional
>    regions, used when the GIC doesn't have banked registers. The offset is
>    cpu-offset * cpu-nr.
>  
> +- clocks        : List of phandle and clock-specific pairs, one for each entry
> +  in clock-names.
> +- clock-names   : List of names for the GIC clock input(s). Valid clock names
> +  depend on the GIC variant:
> +	"ic_clk" (for "arm,arm11mp-gic")
> +	"PERIPHCLKEN" (for "arm,cortex-a15-gic")
> +	"PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic")
> +	"clk" (for "arm,gic-400")
> +	"gclk" (for "arm,pl390")
> +
> +- power-domains : A phandle and PM domain specifier as defined by bindings of
> +		  the power controller specified by phandle, used when the GIC
> +		  is part of a Power or Clock Domain.
> +
> +
>  Example:
>  
>  	intc: interrupt-controller@fff11000 {
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web