Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1219861 > unrolled thread

[PATCH 2/3] devicetree: Add new ANX7814 SlimPort transmitter binding.

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/3] devicetree: Add new ANX7814 SlimPort transmitter binding. Enric Balletbo i Serra <eballetbo@gmail.com> - 2015-09-06 23:20 +0200

#1219861 — [PATCH 2/3] devicetree: Add new ANX7814 SlimPort transmitter binding.

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.

You can add support to your board with current binding.

Example:

	anx7814: anx7814@38 {
		compatible = "analogix,anx7814";
		reg = <0x38>;
		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
 .../devicetree/bindings/video/bridge/anx7814.txt   | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt

diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 0000000..a8cc746
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,22 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible	: "analogix,anx7814"
+ - reg		: I2C address of the device
+ - pd-gpios	: Which GPIO to use for power down
+ - reset-gpios	: Which GPIO to use for reset
+
+Example:
+
+	anx7814: anx7814@38 {
+		compatible = "analogix,anx7814";
+		reg = <0x38>;
+		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web