Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1213378 > unrolled thread
| Started by | Stephen Boyd <sboyd@codeaurora.org> |
|---|---|
| First post | 2015-08-25 23:40 +0200 |
| Last post | 2015-09-03 18:00 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v2 1/6] ARM: dts: ifc6410: Add pwrseq support for WLAN Stephen Boyd <sboyd@codeaurora.org> - 2015-08-25 23:40 +0200
Re: [PATCH v2 1/6] ARM: dts: ifc6410: Add pwrseq support for WLAN Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - 2015-09-03 18:00 +0200
| From | Stephen Boyd <sboyd@codeaurora.org> |
|---|---|
| Date | 2015-08-25 23:40 +0200 |
| Subject | Re: [PATCH v2 1/6] ARM: dts: ifc6410: Add pwrseq support for WLAN |
| Message-ID | <q1u6K-230-45@gated-at.bofh.it> |
On 08/18/2015 06:06 AM, Srinivas Kandagatla wrote:
> @@ -10,6 +11,20 @@
> serial1 = &gsbi6_serial;
> };
>
> + pwrseq {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
Why do we need any of these three properties?
> + compatible = "simple-bus";
> +
> + sdcc4_pwrseq: sdcc4_pwrseq {
> + pinctrl-names = "default";
> + pinctrl-0 = <&wlan_default_gpios>;
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
Especially because this node doesn't have a reg property.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
|---|---|
| Date | 2015-09-03 18:00 +0200 |
| Message-ID | <q4F5E-83m-21@gated-at.bofh.it> |
| In reply to | #1213378 |
On 25/08/15 22:33, Stephen Boyd wrote:
> On 08/18/2015 06:06 AM, Srinivas Kandagatla wrote:
>> @@ -10,6 +11,20 @@
>> serial1 = &gsbi6_serial;
>> };
>> + pwrseq {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>
> Why do we need any of these three properties?
>
Yep, you are right I will remove it and give it a try.
>> + compatible = "simple-bus";
>> +
>> + sdcc4_pwrseq: sdcc4_pwrseq {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&wlan_default_gpios>;
>> + compatible = "mmc-pwrseq-simple";
>> + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
>
> Especially because this node doesn't have a reg property.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web