Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1214928 > unrolled thread

[PATCH 3.19.y-ckt 057/130] bonding: correctly handle bonding type change on enslave failure

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3.19.y-ckt 057/130] bonding: correctly handle bonding type change on enslave failure Kamal Mostafa <kamal@canonical.com> - 2015-08-28 00:40 +0200

#1214928 — [PATCH 3.19.y-ckt 057/130] bonding: correctly handle bonding type change on enslave failure

3.19.8-ckt6 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

commit 7d5cd2ce5292b45e555de776cb9e72975a07460d upstream.

If the bond is enslaving a device with different type it will be setup
by it, but if after being setup the enslave fails the bond doesn't
switch back its type and also keeps pointers to foreign structures that can
be long gone. Thus revert back any type changes if the enslave failed and
the bond had to change its type.
Example:
 Before patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
    link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff
(notice the MASTER flag is gone)

 After patch:
$ echo lo > bond0/bonding/slaves
-bash: echo: write error: Cannot assign requested address
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff
$ echo +eth1 > bond0/bonding/slaves
$ ip l sh bond0
21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
    link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/bonding/bond_main.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 68ad39a..19186bf 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1617,9 +1617,16 @@ err_free:
 
 err_undo_flags:
 	/* Enslave of first slave has failed and we need to fix master's mac */
-	if (!bond_has_slaves(bond) &&
-	    ether_addr_equal_64bits(bond_dev->dev_addr, slave_dev->dev_addr))
-		eth_hw_addr_random(bond_dev);
+	if (!bond_has_slaves(bond)) {
+		if (ether_addr_equal_64bits(bond_dev->dev_addr,
+					    slave_dev->dev_addr))
+			eth_hw_addr_random(bond_dev);
+		if (bond_dev->type != ARPHRD_ETHER) {
+			ether_setup(bond_dev);
+			bond_dev->flags |= IFF_MASTER;
+			bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+		}
+	}
 
 	return res;
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web