Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1214303 > unrolled thread

[PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode()

Started byGuenter Roeck <linux@roeck-us.net>
First post2015-08-27 05:30 +0200
Last post2015-08-27 23:30 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode() Guenter Roeck <linux@roeck-us.net> - 2015-08-27 05:30 +0200
    Re: [PATCH -next v3 2/2] smsc911x: Ignore error return from  device_get_phy_mode() David Miller <davem@davemloft.net> - 2015-08-27 23:30 +0200

#1214303 — [PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode()

FromGuenter Roeck <linux@roeck-us.net>
Date2015-08-27 05:30 +0200
Subject[PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode()
Message-ID<q1W30-Dv-5@gated-at.bofh.it>
Commit 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is
configured or used") introduces an error check for the return value from
device_get_phy_mode() and bails out if there is an error. Unfortunately,
there are configurations where no phy is configured. Those configurations
now fail.

To fix the problem, accept error returns from device_get_phy_mode(),
and use the return value from device_property_read_u32() to determine
if there is a suitable firmware interface to read the configuration.

Fixes: 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used")
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: Dropped RFC
    Removed check for -ENODATA
    Depends on patch 1/2
v3: Added Tony's Tested-by:

Tested with non-devicetree and devicetree configurations.
Should be tested with ACPI configuration.

 drivers/net/ethernet/smsc/smsc911x.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 6eef3251d833..c8b26259c9cf 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2369,23 +2369,25 @@ static int smsc911x_probe_config(struct smsc911x_platform_config *config,
 {
 	int phy_interface;
 	u32 width = 0;
+	int err;
 
 	phy_interface = device_get_phy_mode(dev);
 	if (phy_interface < 0)
-		return phy_interface;
-
+		phy_interface = PHY_INTERFACE_MODE_NA;
 	config->phy_interface = phy_interface;
 
 	device_get_mac_address(dev, config->mac, ETH_ALEN);
 
-	device_property_read_u32(dev, "reg-shift", &config->shift);
-
-	device_property_read_u32(dev, "reg-io-width", &width);
-	if (width == 4)
+	err = device_property_read_u32(dev, "reg-io-width", &width);
+	if (err == -ENXIO)
+		return err;
+	if (!err && width == 4)
 		config->flags |= SMSC911X_USE_32BIT;
 	else
 		config->flags |= SMSC911X_USE_16BIT;
 
+	device_property_read_u32(dev, "reg-shift", &config->shift);
+
 	if (device_property_present(dev, "smsc,irq-active-high"))
 		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1214832 — Re: [PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode()

FromDavid Miller <davem@davemloft.net>
Date2015-08-27 23:30 +0200
SubjectRe: [PATCH -next v3 2/2] smsc911x: Ignore error return from device_get_phy_mode()
Message-ID<q2cUb-83v-13@gated-at.bofh.it>
In reply to#1214303
From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 26 Aug 2015 20:27:05 -0700

> Commit 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is
> configured or used") introduces an error check for the return value from
> device_get_phy_mode() and bails out if there is an error. Unfortunately,
> there are configurations where no phy is configured. Those configurations
> now fail.
> 
> To fix the problem, accept error returns from device_get_phy_mode(),
> and use the return value from device_property_read_u32() to determine
> if there is a suitable firmware interface to read the configuration.
> 
> Fixes: 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used")
> Tested-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web