Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1160954 > unrolled thread

Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node for APM X-Gene platform

Started byDann Frazier <dann.frazier@canonical.com>
First post2015-06-09 05:50 +0200
Last post2015-06-11 01:10 +0200
Articles 3 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node  for APM X-Gene platform Dann Frazier <dann.frazier@canonical.com> - 2015-06-09 05:50 +0200
    Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node  for APM X-Gene platform Tai Tri Nguyen <ttnguyen@apm.com> - 2015-06-09 06:40 +0200
      Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node  for APM X-Gene platform Moritz Fischer <moritz.fischer@ettus.com> - 2015-06-11 01:10 +0200

#1160954 — Re: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node for APM X-Gene platform

FromDann Frazier <dann.frazier@canonical.com>
Date2015-06-09 05:50 +0200
SubjectRe: [PATCH 2/2 RESEND] power: reset: Add syscon poweroff device node for APM X-Gene platform
Message-ID<pziI2-2ST-7@gated-at.bofh.it>
On Tue, Jun 2, 2015 at 1:19 PM, Tai Nguyen <ttnguyen@apm.com> wrote:
> This patch adds syscon poweroff device node to support poweroff feature
> on APM X-Gene Mustang platform

hey Tai,
 The reboot changes work just fine for me, but poweroff does not:

[  OK  ] Reached target Final Step.
         Starting Power-Off...
reboot: Power down
Unable to poweroff system
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G        W       4.1.0-rc7+ #1
Hardware name: APM X-Gene Mustang board (DT)
Call trace:
[<ffffffc00008990c>] dump_backtrace+0x0/0x11c
[<ffffffc000089a38>] show_stack+0x10/0x1c
[<ffffffc0005b447c>] dump_stack+0x88/0xc8
[<ffffffc0005b3374>] panic+0xe0/0x220
[<ffffffc0000b5f24>] do_exit+0x990/0x994
[<ffffffc0000d06bc>] SyS_reboot+0x14c/0x208
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

  -dann

> Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
> ---
>  arch/arm64/boot/dts/apm/apm-mustang.dts |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
> index 83578e7..910d561 100644
> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
> @@ -23,6 +23,18 @@
>                 device_type = "memory";
>                 reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
>         };
> +
> +       poweroff_mbox: poweroff_mbox@10548000 {
> +               compatible = "syscon";
> +               reg = <0x0 0x10548000 0x0 0x30>;
> +       };
> +
> +       poweroff: poweroff@10548010 {
> +               compatible = "syscon-poweroff";
> +               regmap = <&poweroff_mbox>;
> +               offset = <0x10>;
> +               mask = <0x1>;
> +       };
>  };
>
>  &pcie0clk {
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1160972

FromTai Tri Nguyen <ttnguyen@apm.com>
Date2015-06-09 06:40 +0200
Message-ID<pzjup-45R-9@gated-at.bofh.it>
In reply to#1160954
Hi Dann,

On Mon, Jun 8, 2015 at 8:44 PM, Dann Frazier <dann.frazier@canonical.com> wrote:
> On Tue, Jun 2, 2015 at 1:19 PM, Tai Nguyen <ttnguyen@apm.com> wrote:
>> This patch adds syscon poweroff device node to support poweroff feature
>> on APM X-Gene Mustang platform
>
> hey Tai,
>  The reboot changes work just fine for me, but poweroff does not:
>
> [  OK  ] Reached target Final Step.
>          Starting Power-Off...
> reboot: Power down
> Unable to poweroff system
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>
> CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G        W       4.1.0-rc7+ #1
> Hardware name: APM X-Gene Mustang board (DT)
> Call trace:
> [<ffffffc00008990c>] dump_backtrace+0x0/0x11c
> [<ffffffc000089a38>] show_stack+0x10/0x1c
> [<ffffffc0005b447c>] dump_stack+0x88/0xc8
> [<ffffffc0005b3374>] panic+0xe0/0x220
> [<ffffffc0000b5f24>] do_exit+0x990/0x994
> [<ffffffc0000d06bc>] SyS_reboot+0x14c/0x208
> ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>
>   -dann
>

Thanks for testing my patches.
On APM X-Gene Mustang platform, power off circuit is controlled by firmware.
It requires a firmware update to support power off feature.
May I ask what firmware version you're running on?

Tai


>> Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
>> ---
>>  arch/arm64/boot/dts/apm/apm-mustang.dts |   12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
>> index 83578e7..910d561 100644
>> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
>> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
>> @@ -23,6 +23,18 @@
>>                 device_type = "memory";
>>                 reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
>>         };
>> +
>> +       poweroff_mbox: poweroff_mbox@10548000 {
>> +               compatible = "syscon";
>> +               reg = <0x0 0x10548000 0x0 0x30>;
>> +       };
>> +
>> +       poweroff: poweroff@10548010 {
>> +               compatible = "syscon-poweroff";
>> +               regmap = <&poweroff_mbox>;
>> +               offset = <0x10>;
>> +               mask = <0x1>;
>> +       };
>>  };
>>
>>  &pcie0clk {
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



-- 
Tai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1162931

FromMoritz Fischer <moritz.fischer@ettus.com>
Date2015-06-11 01:10 +0200
Message-ID<pzXi9-43d-5@gated-at.bofh.it>
In reply to#1160972
On Wed, Jun 10, 2015 at 12:13 PM, Dann Frazier
<dann.frazier@canonical.com> wrote:
> On Tue, Jun 9, 2015 at 9:31 AM, Dann Frazier <dann.frazier@canonical.com> wrote:
>> On Mon, Jun 8, 2015 at 10:34 PM, Tai Tri Nguyen <ttnguyen@apm.com> wrote:
>>> Hi Dann,
>>>
>>> On Mon, Jun 8, 2015 at 8:44 PM, Dann Frazier <dann.frazier@canonical.com> wrote:
>>>> On Tue, Jun 2, 2015 at 1:19 PM, Tai Nguyen <ttnguyen@apm.com> wrote:
>>>>> This patch adds syscon poweroff device node to support poweroff feature
>>>>> on APM X-Gene Mustang platform
>>>>
>>>> hey Tai,
>>>>  The reboot changes work just fine for me, but poweroff does not:
>>>>
>>>> [  OK  ] Reached target Final Step.
>>>>          Starting Power-Off...
>>>> reboot: Power down
>>>> Unable to poweroff system
>>>> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>>>>
>>>> CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G        W       4.1.0-rc7+ #1
>>>> Hardware name: APM X-Gene Mustang board (DT)
>>>> Call trace:
>>>> [<ffffffc00008990c>] dump_backtrace+0x0/0x11c
>>>> [<ffffffc000089a38>] show_stack+0x10/0x1c
>>>> [<ffffffc0005b447c>] dump_stack+0x88/0xc8
>>>> [<ffffffc0005b3374>] panic+0xe0/0x220
>>>> [<ffffffc0000b5f24>] do_exit+0x990/0x994
>>>> [<ffffffc0000d06bc>] SyS_reboot+0x14c/0x208
>>>> ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
>>>>
>>>>   -dann
>>>>
>>>
>>> Thanks for testing my patches.
>>> On APM X-Gene Mustang platform, power off circuit is controlled by firmware.
>>> It requires a firmware update to support power off feature.
>>> May I ask what firmware version you're running on?
>>
>> Sure, 1.15.12.
>
> Tai worked with me offline. For reference, this requires an updated
> SlimPro firmware in addition to the u-boot update. Verified it works
> for me after the update, so:
>
> Tested-by: dann frazier <dann.frazier@canoncial.com>

Looks good.

Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
>
>>   -dann
>>
>>> Tai
>>>
>>>
>>>>> Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
>>>>> ---
>>>>>  arch/arm64/boot/dts/apm/apm-mustang.dts |   12 ++++++++++++
>>>>>  1 file changed, 12 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>>> index 83578e7..910d561 100644
>>>>> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>>> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
>>>>> @@ -23,6 +23,18 @@
>>>>>                 device_type = "memory";
>>>>>                 reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
>>>>>         };
>>>>> +
>>>>> +       poweroff_mbox: poweroff_mbox@10548000 {
>>>>> +               compatible = "syscon";
>>>>> +               reg = <0x0 0x10548000 0x0 0x30>;
>>>>> +       };
>>>>> +
>>>>> +       poweroff: poweroff@10548010 {
>>>>> +               compatible = "syscon-poweroff";
>>>>> +               regmap = <&poweroff_mbox>;
>>>>> +               offset = <0x10>;
>>>>> +               mask = <0x1>;
>>>>> +       };
>>>>>  };
>>>>>
>>>>>  &pcie0clk {
>>>>> --
>>>>> 1.7.9.5
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> linux-arm-kernel mailing list
>>>>> linux-arm-kernel@lists.infradead.org
>>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>>
>>>
>>> --
>>> Tai
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web