Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1160408 > unrolled thread
| Started by | Vivek Gautam <gautam.vivek@samsung.com> |
|---|---|
| First post | 2015-06-08 13:10 +0200 |
| Last post | 2015-06-08 13:10 +0200 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.kernel
[PATCH v4 1/2] usb: ehci-exynos: Make provision for vdd regulators Vivek Gautam <gautam.vivek@samsung.com> - 2015-06-08 13:10 +0200
[PATCH v4 2/2] usb: ohci-exynos: Make provision for vdd regulators Vivek Gautam <gautam.vivek@samsung.com> - 2015-06-08 13:10 +0200
| From | Vivek Gautam <gautam.vivek@samsung.com> |
|---|---|
| Date | 2015-06-08 13:10 +0200 |
| Subject | [PATCH v4 1/2] usb: ehci-exynos: Make provision for vdd regulators |
| Message-ID | <pz36i-58h-11@gated-at.bofh.it> |
Facilitate getting required 3.3V and 1.0V VDD supply for
EHCI controller on Exynos.
For example, patches for regulators' nodes:
c8c253f ARM: dts: Add regulator entries to smdk5420
275dcd2 ARM: dts: add max77686 pmic node for smdk5250,
enable only minimum number of regulators on smdk5250.
So ensuring now that the controller driver requests the necessary
VDD regulators (if available, unless there are direct VDD rails),
and enable them so as to make them working on exynos systems.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
---
These patches had long been posted, and i lost track of them.
My apologies for that.
Thanks to Krzysztof for catching this.
Kindly review.
Changes since v3:
- added a if (!IS_ERR()) check for regulators before disabling
them in error path.
Changes since v2:
- replaced devm_regulator_get() with devm_regulator_get_optional().
- Added Documentation for the vdd supplies for the controller.
- Re-did the commit message.
.../devicetree/bindings/usb/exynos-usb.txt | 2 +
drivers/usb/host/ehci-exynos.c | 57 +++++++++++++++++++++-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index 9b4dbe3..776fa03 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -23,6 +23,8 @@ Required properties:
Optional properties:
- samsung,vbus-gpio: if present, specifies the GPIO that
needs to be pulled up for the bus to be powered.
+ - vdd33-supply: handle to 3.3V Vdd supply regulator for the controller.
+ - vdd10-supply: handle to 1.0V Vdd supply regulator for the controller.
Example:
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index df538fd..160ad66 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -21,6 +21,7 @@
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -45,6 +46,8 @@ static struct hc_driver __read_mostly exynos_ehci_hc_driver;
struct exynos_ehci_hcd {
struct clk *clk;
struct phy *phy[PHY_NUMBER];
+ struct regulator *vdd33;
+ struct regulator *vdd10;
};
#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
@@ -170,7 +173,27 @@ static int exynos_ehci_probe(struct platform_device *pdev)
err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
if (err)
- goto fail_clk;
+ goto fail_regulator1;
+
+ exynos_ehci->vdd33 = devm_regulator_get_optional(&pdev->dev, "vdd33");
+ if (!IS_ERR(exynos_ehci->vdd33)) {
+ err = regulator_enable(exynos_ehci->vdd33);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to enable 3.3V Vdd supply\n");
+ goto fail_regulator1;
+ }
+ }
+
+ exynos_ehci->vdd10 = devm_regulator_get_optional(&pdev->dev, "vdd10");
+ if (!IS_ERR(exynos_ehci->vdd10)) {
+ err = regulator_enable(exynos_ehci->vdd10);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to enable 1.0V Vdd supply\n");
+ goto fail_regulator2;
+ }
+ }
skip_phy:
@@ -231,6 +254,12 @@ fail_add_hcd:
fail_io:
clk_disable_unprepare(exynos_ehci->clk);
fail_clk:
+ if (!IS_ERR(exynos_ehci->vdd10))
+ regulator_disable(exynos_ehci->vdd10);
+fail_regulator2:
+ if (!IS_ERR(exynos_ehci->vdd33))
+ regulator_disable(exynos_ehci->vdd33);
+fail_regulator1:
usb_put_hcd(hcd);
return err;
}
@@ -246,6 +275,11 @@ static int exynos_ehci_remove(struct platform_device *pdev)
clk_disable_unprepare(exynos_ehci->clk);
+ if (!IS_ERR(exynos_ehci->vdd33))
+ regulator_disable(exynos_ehci->vdd33);
+ if (!IS_ERR(exynos_ehci->vdd10))
+ regulator_disable(exynos_ehci->vdd10);
+
usb_put_hcd(hcd);
return 0;
@@ -268,6 +302,11 @@ static int exynos_ehci_suspend(struct device *dev)
clk_disable_unprepare(exynos_ehci->clk);
+ if (!IS_ERR(exynos_ehci->vdd33))
+ regulator_disable(exynos_ehci->vdd33);
+ if (!IS_ERR(exynos_ehci->vdd10))
+ regulator_disable(exynos_ehci->vdd10);
+
return rc;
}
@@ -277,6 +316,22 @@ static int exynos_ehci_resume(struct device *dev)
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
int ret;
+ if (!IS_ERR(exynos_ehci->vdd33)) {
+ ret = regulator_enable(exynos_ehci->vdd33);
+ if (ret) {
+ dev_err(dev, "Failed to enable 3.3V Vdd supply\n");
+ return ret;
+ }
+ }
+
+ if (!IS_ERR(exynos_ehci->vdd10)) {
+ ret = regulator_enable(exynos_ehci->vdd10);
+ if (ret) {
+ dev_err(dev, "Failed to enable 1.0V Vdd supply\n");
+ return ret;
+ }
+ }
+
clk_prepare_enable(exynos_ehci->clk);
ret = exynos_ehci_phy_enable(dev);
--
2.2.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Vivek Gautam <gautam.vivek@samsung.com> |
|---|---|
| Date | 2015-06-08 13:10 +0200 |
| Subject | [PATCH v4 2/2] usb: ohci-exynos: Make provision for vdd regulators |
| Message-ID | <pz36i-58h-13@gated-at.bofh.it> |
| In reply to | #1160408 |
Facilitate getting required 3.3V and 1.0V VDD supply for
OHCI controller on Exynos.
For example, patches for regulators' nodes:
c8c253f ARM: dts: Add regulator entries to smdk5420
275dcd2 ARM: dts: add max77686 pmic node for smdk5250,
enable only minimum number of regulators on smdk5250.
So ensuring now that the controller driver requests the necessary
VDD regulators (if available, unless there are direct VDD rails),
and enable them so as to make them working on exynos systems.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
---
Changes since v3:
- added a if (!IS_ERR()) check for regulators before disabling
them in error path.
Changes since v2:
- replaced devm_regulator_get() with devm_regulator_get_optional().
- Added Documentation for the vdd supplies for the controller.
- Re-did the commit message.
.../devicetree/bindings/usb/exynos-usb.txt | 2 +
.../devicetree/bindings/usb/exynos-usb.txt | 4 ++
drivers/usb/host/ohci-exynos.c | 57 +++++++++++++++++++++-
2 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index 776fa03..3883baa 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -63,6 +63,10 @@ Required properties:
port 2 is HSIC phy1
- phys: from the *Generic PHY* bindings, specifying phy used by port.
+Optional properties:
+ - vdd33-supply: handle to 3.3V Vdd supply regulator for the controller.
+ - vdd10-supply: handle to 1.0V Vdd supply regulator for the controller.
+
Example:
usb@12120000 {
compatible = "samsung,exynos4210-ohci";
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 2cd105b..4d6dea4 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -36,6 +37,8 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver;
struct exynos_ohci_hcd {
struct clk *clk;
struct phy *phy[PHY_NUMBER];
+ struct regulator *vdd33;
+ struct regulator *vdd10;
};
static int exynos_ohci_get_phy(struct device *dev,
@@ -139,7 +142,27 @@ static int exynos_ohci_probe(struct platform_device *pdev)
err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci);
if (err)
- goto fail_clk;
+ goto fail_regulator1;
+
+ exynos_ohci->vdd33 = devm_regulator_get_optional(&pdev->dev, "vdd33");
+ if (!IS_ERR(exynos_ohci->vdd33)) {
+ err = regulator_enable(exynos_ohci->vdd33);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to enable 3.3V Vdd supply\n");
+ goto fail_regulator1;
+ }
+ }
+
+ exynos_ohci->vdd10 = devm_regulator_get_optional(&pdev->dev, "vdd10");
+ if (!IS_ERR(exynos_ohci->vdd10)) {
+ err = regulator_enable(exynos_ohci->vdd10);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to enable 1.0V Vdd supply\n");
+ goto fail_regulator2;
+ }
+ }
skip_phy:
exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
@@ -191,6 +214,12 @@ fail_add_hcd:
fail_io:
clk_disable_unprepare(exynos_ohci->clk);
fail_clk:
+ if (!IS_ERR(exynos_ohci->vdd10))
+ regulator_disable(exynos_ohci->vdd10);
+fail_regulator2:
+ if (!IS_ERR(exynos_ohci->vdd33))
+ regulator_disable(exynos_ohci->vdd33);
+fail_regulator1:
usb_put_hcd(hcd);
return err;
}
@@ -206,6 +235,11 @@ static int exynos_ohci_remove(struct platform_device *pdev)
clk_disable_unprepare(exynos_ohci->clk);
+ if (!IS_ERR(exynos_ohci->vdd33))
+ regulator_disable(exynos_ohci->vdd33);
+ if (!IS_ERR(exynos_ohci->vdd10))
+ regulator_disable(exynos_ohci->vdd10);
+
usb_put_hcd(hcd);
return 0;
@@ -234,6 +268,11 @@ static int exynos_ohci_suspend(struct device *dev)
clk_disable_unprepare(exynos_ohci->clk);
+ if (!IS_ERR(exynos_ohci->vdd33))
+ regulator_disable(exynos_ohci->vdd33);
+ if (!IS_ERR(exynos_ohci->vdd10))
+ regulator_disable(exynos_ohci->vdd10);
+
return 0;
}
@@ -243,6 +282,22 @@ static int exynos_ohci_resume(struct device *dev)
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
int ret;
+ if (!IS_ERR(exynos_ohci->vdd33)) {
+ ret = regulator_enable(exynos_ohci->vdd33);
+ if (ret) {
+ dev_err(dev, "Failed to enable 3.3V Vdd supply\n");
+ return ret;
+ }
+ }
+
+ if (!IS_ERR(exynos_ohci->vdd10)) {
+ ret = regulator_enable(exynos_ohci->vdd10);
+ if (ret) {
+ dev_err(dev, "Failed to enable 1.0V Vdd supply\n");
+ return ret;
+ }
+ }
+
clk_prepare_enable(exynos_ohci->clk);
ret = exynos_ohci_phy_enable(dev);
--
2.2.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web