Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1211176 > unrolled thread
| Started by | Sanchayan Maity <maitysanchayan@gmail.com> |
|---|---|
| First post | 2015-08-21 15:40 +0200 |
| Last post | 2015-08-23 18:20 +0200 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen Sanchayan Maity <maitysanchayan@gmail.com> - 2015-08-21 15:40 +0200
Re: [PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen Stefan Agner <stefan@agner.ch> - 2015-08-23 03:40 +0200
Re: [PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen maitysanchayan@gmail.com - 2015-08-23 18:20 +0200
| From | Sanchayan Maity <maitysanchayan@gmail.com> |
|---|---|
| Date | 2015-08-21 15:40 +0200 |
| Subject | [PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen |
| Message-ID | <pZUI2-548-11@gated-at.bofh.it> |
This adds device tree binding documentation for the Colibri VF50
touchscreen driver.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
.../bindings/input/touchscreen/colibri-vf50-ts.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
new file mode 100644
index 0000000..e615aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -0,0 +1,36 @@
+* Toradex Colibri VF50 Touchscreen driver
+
+Required Properties:
+- compatible must be toradex,vf50-touchscreen
+- io-channels: adc channels being used by the Colibri VF50 module
+- xp-gpios: FET gate driver for input of X+
+- xm-gpios: FET gate driver for input of X-
+- yp-gpios: FET gate driver for input of Y+
+- ym-gpios: FET gate driver for input of Y-
+- interrupt-parent: phandle for the interrupt controller
+- interrupts: pen irq interrupt for touch detection
+- pinctrl-names: "idle", "default", "gpios"
+- pinctrl-0: pinctrl node for idle state gpio pinmux
+- pinctrl-1: pinctrl node for touch detection state pinmux
+- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
+- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
+
+Example:
+
+ touchctrl: vf50_touchctrl {
+ compatible = "toradex,vf50-touchscreen";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "idle","default","gpios";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>;
+ pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ status = "disabled";
+ };
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Stefan Agner <stefan@agner.ch> |
|---|---|
| Date | 2015-08-23 03:40 +0200 |
| Subject | Re: [PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen |
| Message-ID | <q0sqm-2Xb-9@gated-at.bofh.it> |
| In reply to | #1211176 |
On 2015-08-21 06:26, Sanchayan Maity wrote:
> This adds device tree binding documentation for the Colibri VF50
> touchscreen driver.
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> .../bindings/input/touchscreen/colibri-vf50-ts.txt | 36 ++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
>
> diff --git
> a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> new file mode 100644
> index 0000000..e615aa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> @@ -0,0 +1,36 @@
> +* Toradex Colibri VF50 Touchscreen driver
> +
> +Required Properties:
> +- compatible must be toradex,vf50-touchscreen
> +- io-channels: adc channels being used by the Colibri VF50 module
> +- xp-gpios: FET gate driver for input of X+
> +- xm-gpios: FET gate driver for input of X-
> +- yp-gpios: FET gate driver for input of Y+
> +- ym-gpios: FET gate driver for input of Y-
> +- interrupt-parent: phandle for the interrupt controller
> +- interrupts: pen irq interrupt for touch detection
I like the use of the interrupt interface for the touch detection pin.
Maybe you can mention here that this is (typically) a GPIO...
> +- pinctrl-names: "idle", "default", "gpios"
> +- pinctrl-0: pinctrl node for idle state gpio pinmux
> +- pinctrl-1: pinctrl node for touch detection state pinmux
"touch detection" for default is rather confusing or even wrong. The
Idle state is used for pen/touch detection, default is used for X/Y and
Pressure measurement (maybe better described as touch measurement).
> +- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
> +- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
> +
> +Example:
> +
> + touchctrl: vf50_touchctrl {
> + compatible = "toradex,vf50-touchscreen";
> + io-channels = <&adc1 0>,<&adc0 0>,
> + <&adc0 1>,<&adc1 2>;
> + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
> + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
> + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
> + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "idle","default","gpios";
> + pinctrl-0 = <&pinctrl_touchctrl_idle>;
> + pinctrl-1 = <&pinctrl_touchctrl_default>;
> + pinctrl-2 = <&pinctrl_touchctrl_gpios>;
> + vf50-ts-min-pressure = <200>;
> + status = "disabled";
> + };
Otherwise I agree with 1 and 2:
Acked-by: Stefan Agner <stefan@agner.ch>
--
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | maitysanchayan@gmail.com |
|---|---|
| Date | 2015-08-23 18:20 +0200 |
| Subject | Re: [PATCH v4 2/3] input: Add DT binding documentation for Colibri VF50 touchscreen |
| Message-ID | <q0G9Y-5RV-1@gated-at.bofh.it> |
| In reply to | #1211550 |
On 15-08-22 18:36:54, Stefan Agner wrote:
> On 2015-08-21 06:26, Sanchayan Maity wrote:
> > This adds device tree binding documentation for the Colibri VF50
> > touchscreen driver.
> >
> > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> > ---
> > .../bindings/input/touchscreen/colibri-vf50-ts.txt | 36 ++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> > b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> > new file mode 100644
> > index 0000000..e615aa9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
> > @@ -0,0 +1,36 @@
> > +* Toradex Colibri VF50 Touchscreen driver
> > +
> > +Required Properties:
> > +- compatible must be toradex,vf50-touchscreen
> > +- io-channels: adc channels being used by the Colibri VF50 module
> > +- xp-gpios: FET gate driver for input of X+
> > +- xm-gpios: FET gate driver for input of X-
> > +- yp-gpios: FET gate driver for input of Y+
> > +- ym-gpios: FET gate driver for input of Y-
> > +- interrupt-parent: phandle for the interrupt controller
> > +- interrupts: pen irq interrupt for touch detection
>
> I like the use of the interrupt interface for the touch detection pin.
> Maybe you can mention here that this is (typically) a GPIO...
>
> > +- pinctrl-names: "idle", "default", "gpios"
> > +- pinctrl-0: pinctrl node for idle state gpio pinmux
> > +- pinctrl-1: pinctrl node for touch detection state pinmux
>
> "touch detection" for default is rather confusing or even wrong. The
> Idle state is used for pen/touch detection, default is used for X/Y and
> Pressure measurement (maybe better described as touch measurement).
Ok. Understood. I see how my wordings can create confusion or are
misleading. Will fix.
- Sanchayan.
>
> > +- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
> > +- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
> > +
> > +Example:
> > +
> > + touchctrl: vf50_touchctrl {
> > + compatible = "toradex,vf50-touchscreen";
> > + io-channels = <&adc1 0>,<&adc0 0>,
> > + <&adc0 1>,<&adc1 2>;
> > + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
> > + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
> > + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
> > + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> > + pinctrl-names = "idle","default","gpios";
> > + pinctrl-0 = <&pinctrl_touchctrl_idle>;
> > + pinctrl-1 = <&pinctrl_touchctrl_default>;
> > + pinctrl-2 = <&pinctrl_touchctrl_gpios>;
> > + vf50-ts-min-pressure = <200>;
> > + status = "disabled";
> > + };
>
> Otherwise I agree with 1 and 2:
>
> Acked-by: Stefan Agner <stefan@agner.ch>
>
> --
> Stefan
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web