Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1206976 > unrolled thread
| Started by | Vivien Didelot <vivien.didelot@savoirfairelinux.com> |
|---|---|
| First post | 2015-08-13 19:00 +0200 |
| Last post | 2015-08-13 19:00 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH net-next 7/7] net: dsa: mv88e6xxx: use port 802.1Q mode Secure Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2015-08-13 19:00 +0200
| From | Vivien Didelot <vivien.didelot@savoirfairelinux.com> |
|---|---|
| Date | 2015-08-13 19:00 +0200 |
| Subject | [PATCH net-next 7/7] net: dsa: mv88e6xxx: use port 802.1Q mode Secure |
| Message-ID | <pX41c-Hx-19@gated-at.bofh.it> |
This commit changes the 802.1Q mode of each port from Disabled to
Secure. This enables the VLAN support, by checking the VTU entries on
ingress.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/mv88e6xxx.c | 14 +++++++-------
drivers/net/dsa/mv88e6xxx.h | 5 +++++
2 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index ca867e4..332f2c8 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2005,13 +2005,11 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
goto abort;
}
- /* Port Control 2: don't force a good FCS, set the maximum
- * frame size to 10240 bytes, don't let the switch add or
- * strip 802.1q tags, don't discard tagged or untagged frames
- * on this port, do a destination address lookup on all
- * received packets as usual, disable ARP mirroring and don't
- * send a copy of all transmitted/received frames on this port
- * to the CPU.
+ /* Port Control 2: don't force a good FCS, set the maximum frame size to
+ * 10240 bytes, enable secure 802.1q tags, don't discard tagged or
+ * untagged frames on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't send a
+ * copy of all transmitted/received frames on this port to the CPU.
*/
reg = 0;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
@@ -2033,6 +2031,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
reg |= PORT_CONTROL_2_FORWARD_UNKNOWN;
}
+ reg |= PORT_CONTROL_2_8021Q_SECURE;
+
if (reg) {
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_CONTROL_2, reg);
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index ca3268f..72ca887 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -140,6 +140,11 @@
#define PORT_CONTROL_2_JUMBO_1522 (0x00 << 12)
#define PORT_CONTROL_2_JUMBO_2048 (0x01 << 12)
#define PORT_CONTROL_2_JUMBO_10240 (0x02 << 12)
+#define PORT_CONTROL_2_8021Q_MASK (0x03 << 10)
+#define PORT_CONTROL_2_8021Q_DISABLED (0x00 << 10)
+#define PORT_CONTROL_2_8021Q_FALLBACK (0x01 << 10)
+#define PORT_CONTROL_2_8021Q_CHECK (0x02 << 10)
+#define PORT_CONTROL_2_8021Q_SECURE (0x03 << 10)
#define PORT_CONTROL_2_DISCARD_TAGGED BIT(9)
#define PORT_CONTROL_2_DISCARD_UNTAGGED BIT(8)
#define PORT_CONTROL_2_MAP_DA BIT(7)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to top | Article view | linux.kernel
csiph-web