Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1206129 > unrolled thread
| Started by | Antoine Tenart <antoine.tenart@free-electrons.com> |
|---|---|
| First post | 2015-08-12 16:00 +0200 |
| Last post | 2015-08-12 16:00 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v3 3/5] ARM: berlin: add a PWM node on the BG2Q Antoine Tenart <antoine.tenart@free-electrons.com> - 2015-08-12 16:00 +0200
| From | Antoine Tenart <antoine.tenart@free-electrons.com> |
|---|---|
| Date | 2015-08-12 16:00 +0200 |
| Subject | [PATCH v3 3/5] ARM: berlin: add a PWM node on the BG2Q |
| Message-ID | <pWEJs-6cZ-9@gated-at.bofh.it> |
This patch adds a PWM node in the Berlin BG2Q device tree, using the
newly added Berlin PWM driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a48490e2f9..5bfa71a87617 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -477,6 +477,13 @@
status = "disabled";
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to top | Article view | linux.kernel
csiph-web