Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1203686 > unrolled thread

[PATCH] ARM: dts: sunxi: Use the axp209 driver on the olimex lime2

Started byOlliver Schinagl <oliver@schinagl.nl>
First post2015-08-09 21:10 +0200
Last post2015-08-10 10:50 +0200
Articles 4 — 2 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH] ARM: dts: sunxi: Use the axp209 driver on the olimex lime2 Olliver Schinagl <oliver@schinagl.nl> - 2015-08-09 21:10 +0200
    [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2 Olliver Schinagl <oliver@schinagl.nl> - 2015-08-09 21:10 +0200
      Re: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the  sun7i-a20-olinuxino-lime2 Iain Paton <ipaton0@gmail.com> - 2015-08-10 01:10 +0200
        Re: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the  sun7i-a20-olinuxino-lime2 Olliver Schinagl <oliver@schinagl.nl> - 2015-08-10 10:50 +0200

#1203686 — [PATCH] ARM: dts: sunxi: Use the axp209 driver on the olimex lime2

FromOlliver Schinagl <oliver@schinagl.nl>
Date2015-08-09 21:10 +0200
Subject[PATCH] ARM: dts: sunxi: Use the axp209 driver on the olimex lime2
Message-ID<pVE8N-6HM-5@gated-at.bofh.it>
This patch enables usage of the axp209 on the OLinuXino Lime2 and was tested
the OLinuXino Lime2-4GB.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Olliver Schinagl (1):
  ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2

 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 131 ++++++++++++++----------
 1 file changed, 75 insertions(+), 56 deletions(-)

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1203687 — [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2

FromOlliver Schinagl <oliver@schinagl.nl>
Date2015-08-09 21:10 +0200
Subject[PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2
Message-ID<pVE8N-6HM-7@gated-at.bofh.it>
In reply to#1203686
From: Olliver Schinagl <o.schinagl@ultimaker.com>

This patch enables the musb-otg USB controller on the Lime2. The Lime2
differs from the Lime1 series in pins used for usb0 power.

Tested on a OlinuXino Lime2-4GB.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
---
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 131 ++++++++++++++----------
 1 file changed, 75 insertions(+), 56 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 22cd052..efd9ebb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -71,14 +71,6 @@
 			default-state = "on";
 		};
 	};
-
-	reg_axp_ipsout: axp_ipsout {
-		compatible = "regulator-fixed";
-		regulator-name = "axp-ipsout";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
 };
 
 &ahci {
@@ -86,6 +78,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -112,57 +108,9 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		acin-supply = <&reg_axp_ipsout>;
-		vin2-supply = <&reg_axp_ipsout>;
-		vin3-supply = <&reg_axp_ipsout>;
-		ldo24in-supply = <&reg_axp_ipsout>;
-		ldo3in-supply = <&reg_axp_ipsout>;
-
-		regulators {
-			vdd_rtc: ldo1 {
-				regulator-min-microvolt = <1300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			avcc: ldo2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_csi0: ldo3 {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-
-			vcc_csi1: ldo4 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_cpu: dcdc2 {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <2275000>;
-				regulator-always-on;
-			};
-
-			vdd_int: dcdc3 {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-		};
 	};
 };
 
@@ -196,6 +144,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -210,6 +162,27 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
+		allwinner,pins = "PC17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &reg_ahci_5v {
@@ -218,6 +191,42 @@
 	status = "okay";
 };
 
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_lime2>;
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -232,7 +241,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1203708 — Re: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2

FromIain Paton <ipaton0@gmail.com>
Date2015-08-10 01:10 +0200
SubjectRe: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2
Message-ID<pVHT4-3Fz-23@gated-at.bofh.it>
In reply to#1203687
NAK. This does much more than enabling the otg port.

Neither wholesale re-writing the regulator node or hooking up the 
dcdc2 regulator to the operating points definition is required in order 
to enable the otg port.  

At the very least you need to split your patches and describe them 
properly rather than trying to get additional changes that are likely 
to cause further discussion through unnoticed using a misleading 
subject.

Rgds,
Iain
 
On 09/08/15 20:02, Olliver Schinagl wrote:
> From: Olliver Schinagl <o.schinagl@ultimaker.com>
> 
> This patch enables the musb-otg USB controller on the Lime2. The Lime2
> differs from the Lime1 series in pins used for usb0 power.
> 
> Tested on a OlinuXino Lime2-4GB.
> 
> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> ---
>  arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 131 ++++++++++++++----------
>  1 file changed, 75 insertions(+), 56 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> index 22cd052..efd9ebb 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> @@ -71,14 +71,6 @@
>  			default-state = "on";
>  		};
>  	};
> -
> -	reg_axp_ipsout: axp_ipsout {
> -		compatible = "regulator-fixed";
> -		regulator-name = "axp-ipsout";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		regulator-always-on;
> -	};
>  };
>  
>  &ahci {
> @@ -86,6 +78,10 @@
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &ehci0 {
>  	status = "okay";
>  };
> @@ -112,57 +108,9 @@
>  	status = "okay";
>  
>  	axp209: pmic@34 {
> -		compatible = "x-powers,axp209";
>  		reg = <0x34>;
>  		interrupt-parent = <&nmi_intc>;
>  		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> -
> -		interrupt-controller;
> -		#interrupt-cells = <1>;
> -
> -		acin-supply = <&reg_axp_ipsout>;
> -		vin2-supply = <&reg_axp_ipsout>;
> -		vin3-supply = <&reg_axp_ipsout>;
> -		ldo24in-supply = <&reg_axp_ipsout>;
> -		ldo3in-supply = <&reg_axp_ipsout>;
> -
> -		regulators {
> -			vdd_rtc: ldo1 {
> -				regulator-min-microvolt = <1300000>;
> -				regulator-max-microvolt = <1300000>;
> -				regulator-always-on;
> -			};
> -
> -			avcc: ldo2 {
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-always-on;
> -			};
> -
> -			vcc_csi0: ldo3 {
> -				regulator-min-microvolt = <700000>;
> -				regulator-max-microvolt = <3500000>;
> -				regulator-always-on;
> -			};
> -
> -			vcc_csi1: ldo4 {
> -				regulator-min-microvolt = <1250000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-always-on;
> -			};
> -
> -			vdd_cpu: dcdc2 {
> -				regulator-min-microvolt = <700000>;
> -				regulator-max-microvolt = <2275000>;
> -				regulator-always-on;
> -			};
> -
> -			vdd_int: dcdc3 {
> -				regulator-min-microvolt = <700000>;
> -				regulator-max-microvolt = <3500000>;
> -				regulator-always-on;
> -			};
> -		};
>  	};
>  };
>  
> @@ -196,6 +144,10 @@
>  	status = "okay";
>  };
>  
> +&otg_sram {
> +	status = "okay";
> +};
> +
>  &pio {
>  	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
>  		allwinner,pins = "PC3";
> @@ -210,6 +162,27 @@
>  		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
>  		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>  	};
> +
> +	usb0_id_detect_pin: usb0_id_detect_pin@0 {
> +		allwinner,pins = "PH4";
> +		allwinner,function = "gpio_in";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> +	};
> +
> +	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
> +		allwinner,pins = "PH5";
> +		allwinner,function = "gpio_in";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
> +	};
> +
> +	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
> +		allwinner,pins = "PC17";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +	};
>  };
>  
>  &reg_ahci_5v {
> @@ -218,6 +191,42 @@
>  	status = "okay";
>  };
>  
> +#include "axp209.dtsi"
> +
> +&reg_dcdc2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1450000>;
> +	regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1300000>;
> +	regulator-max-microvolt = <1300000>;
> +	regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3000000>;
> +	regulator-max-microvolt = <3000000>;
> +	regulator-name = "avcc";
> +};
> +
> +&reg_usb0_vbus {
> +	pinctrl-0 = <&usb0_vbus_pin_lime2>;
> +	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +};
> +
>  &reg_usb1_vbus {
>  	status = "okay";
>  };
> @@ -232,7 +241,17 @@
>  	status = "okay";
>  };
>  
> +&usb_otg {
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
>  &usbphy {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> +	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> +	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> +	usb0_vbus-supply = <&reg_usb0_vbus>;
>  	usb1_vbus-supply = <&reg_usb1_vbus>;
>  	usb2_vbus-supply = <&reg_usb2_vbus>;
>  	status = "okay";
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1203894 — Re: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2

FromOlliver Schinagl <oliver@schinagl.nl>
Date2015-08-10 10:50 +0200
SubjectRe: [linux-sunxi] [PATCH] ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2
Message-ID<pVQWm-U9-3@gated-at.bofh.it>
In reply to#1203708
Yeah I just noticed as well that for some reason i've sent a merged patch :(

I all ready fixed it locally this morning and will re-send the patches. 
I wonder what I did though ..

Sorry again,

Olliver

On 10-08-15 01:05, Iain Paton wrote:
> NAK. This does much more than enabling the otg port.
>
> Neither wholesale re-writing the regulator node or hooking up the
> dcdc2 regulator to the operating points definition is required in order
> to enable the otg port.
>
> At the very least you need to split your patches and describe them
> properly rather than trying to get additional changes that are likely
> to cause further discussion through unnoticed using a misleading
> subject.
>
> Rgds,
> Iain
>   
> On 09/08/15 20:02, Olliver Schinagl wrote:
>> From: Olliver Schinagl <o.schinagl@ultimaker.com>
>>
>> This patch enables the musb-otg USB controller on the Lime2. The Lime2
>> differs from the Lime1 series in pins used for usb0 power.
>>
>> Tested on a OlinuXino Lime2-4GB.
>>
>> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
>> ---
>>   arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 131 ++++++++++++++----------
>>   1 file changed, 75 insertions(+), 56 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
>> index 22cd052..efd9ebb 100644
>> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
>> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
>> @@ -71,14 +71,6 @@
>>   			default-state = "on";
>>   		};
>>   	};
>> -
>> -	reg_axp_ipsout: axp_ipsout {
>> -		compatible = "regulator-fixed";
>> -		regulator-name = "axp-ipsout";
>> -		regulator-min-microvolt = <5000000>;
>> -		regulator-max-microvolt = <5000000>;
>> -		regulator-always-on;
>> -	};
>>   };
>>   
>>   &ahci {
>> @@ -86,6 +78,10 @@
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &ehci0 {
>>   	status = "okay";
>>   };
>> @@ -112,57 +108,9 @@
>>   	status = "okay";
>>   
>>   	axp209: pmic@34 {
>> -		compatible = "x-powers,axp209";
>>   		reg = <0x34>;
>>   		interrupt-parent = <&nmi_intc>;
>>   		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> -
>> -		interrupt-controller;
>> -		#interrupt-cells = <1>;
>> -
>> -		acin-supply = <&reg_axp_ipsout>;
>> -		vin2-supply = <&reg_axp_ipsout>;
>> -		vin3-supply = <&reg_axp_ipsout>;
>> -		ldo24in-supply = <&reg_axp_ipsout>;
>> -		ldo3in-supply = <&reg_axp_ipsout>;
>> -
>> -		regulators {
>> -			vdd_rtc: ldo1 {
>> -				regulator-min-microvolt = <1300000>;
>> -				regulator-max-microvolt = <1300000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			avcc: ldo2 {
>> -				regulator-min-microvolt = <1800000>;
>> -				regulator-max-microvolt = <3300000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			vcc_csi0: ldo3 {
>> -				regulator-min-microvolt = <700000>;
>> -				regulator-max-microvolt = <3500000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			vcc_csi1: ldo4 {
>> -				regulator-min-microvolt = <1250000>;
>> -				regulator-max-microvolt = <3300000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			vdd_cpu: dcdc2 {
>> -				regulator-min-microvolt = <700000>;
>> -				regulator-max-microvolt = <2275000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			vdd_int: dcdc3 {
>> -				regulator-min-microvolt = <700000>;
>> -				regulator-max-microvolt = <3500000>;
>> -				regulator-always-on;
>> -			};
>> -		};
>>   	};
>>   };
>>   
>> @@ -196,6 +144,10 @@
>>   	status = "okay";
>>   };
>>   
>> +&otg_sram {
>> +	status = "okay";
>> +};
>> +
>>   &pio {
>>   	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
>>   		allwinner,pins = "PC3";
>> @@ -210,6 +162,27 @@
>>   		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
>>   		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>>   	};
>> +
>> +	usb0_id_detect_pin: usb0_id_detect_pin@0 {
>> +		allwinner,pins = "PH4";
>> +		allwinner,function = "gpio_in";
>> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> +	};
>> +
>> +	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
>> +		allwinner,pins = "PH5";
>> +		allwinner,function = "gpio_in";
>> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
>> +	};
>> +
>> +	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
>> +		allwinner,pins = "PC17";
>> +		allwinner,function = "gpio_out";
>> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +	};
>>   };
>>   
>>   &reg_ahci_5v {
>> @@ -218,6 +191,42 @@
>>   	status = "okay";
>>   };
>>   
>> +#include "axp209.dtsi"
>> +
>> +&reg_dcdc2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1000000>;
>> +	regulator-max-microvolt = <1450000>;
>> +	regulator-name = "vdd-cpu";
>> +};
>> +
>> +&reg_dcdc3 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1000000>;
>> +	regulator-max-microvolt = <1400000>;
>> +	regulator-name = "vdd-int-dll";
>> +};
>> +
>> +&reg_ldo1 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1300000>;
>> +	regulator-max-microvolt = <1300000>;
>> +	regulator-name = "vdd-rtc";
>> +};
>> +
>> +&reg_ldo2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <3000000>;
>> +	regulator-max-microvolt = <3000000>;
>> +	regulator-name = "avcc";
>> +};
>> +
>> +&reg_usb0_vbus {
>> +	pinctrl-0 = <&usb0_vbus_pin_lime2>;
>> +	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
>> +	status = "okay";
>> +};
>> +
>>   &reg_usb1_vbus {
>>   	status = "okay";
>>   };
>> @@ -232,7 +241,17 @@
>>   	status = "okay";
>>   };
>>   
>> +&usb_otg {
>> +	dr_mode = "otg";
>> +	status = "okay";
>> +};
>> +
>>   &usbphy {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
>> +	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
>> +	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
>> +	usb0_vbus-supply = <&reg_usb0_vbus>;
>>   	usb1_vbus-supply = <&reg_usb1_vbus>;
>>   	usb2_vbus-supply = <&reg_usb2_vbus>;
>>   	status = "okay";
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web