Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1201626 > unrolled thread

[PATCH v6 2/2] Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v6 2/2] Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver Wenyou Yang <wenyou.yang@atmel.com> - 2015-08-06 12:30 +0200
    Re: [PATCH v6 2/2] Documentation: dt: binding: atmel-sama5d4-wdt:  for SAMA5D4 watchdog driver Guenter Roeck <linux@roeck-us.net> - 2015-08-07 17:30 +0200

#1201626 — [PATCH v6 2/2] Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver

The compatible "atmel,sama5d4-wdt" supports the SAMA5D4 watchdog driver
and the watchdog's WDT_MR register can be written more than once.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
 .../bindings/watchdog/atmel-sama5d4-wdt.txt        |   35 ++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
new file mode 100644
index 0000000..f7cc7c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
@@ -0,0 +1,35 @@
+* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible: "atmel,sama5d4-wdt"
+- reg: base physical address and length of memory mapped region.
+
+Optional properties:
+- timeout-sec: watchdog timeout value (in seconds).
+- interrupts: interrupt number to the CPU.
+- atmel,watchdog-type: should be "hardware" or "software".
+	"hardware": enable watchdog fault reset. A watchdog fault triggers
+		    watchdog reset.
+	"software": enable watchdog fault interrupt. A watchdog fault asserts
+		    watchdog interrupt.
+- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
+		   in idle state.
+	CAUTION: This property should be used with care, it actually makes the
+	watchdog not counting when the CPU is in idle state, therefore the
+	watchdog reset time depends on mean CPU usage and will not reset at all
+	if the CPU stop working while it is in idle state, which is probably
+	not what you want.
+- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
+		  in debug state.
+
+Example:
+	watchdog@fc068640 {
+		compatible = "atmel,sama5d4-wdt";
+		reg = <0xfc068640 0x10>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+		timeout-sec = <10>;
+		atmel,watchdog-type = "hardware";
+		atmel,dbg-halt;
+		atmel,idle-halt;
+		status = "okay";
+	};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1202820 — Re: [PATCH v6 2/2] Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver

On 08/06/2015 03:17 AM, Wenyou Yang wrote:
> The compatible "atmel,sama5d4-wdt" supports the SAMA5D4 watchdog driver
> and the watchdog's WDT_MR register can be written more than once.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   .../bindings/watchdog/atmel-sama5d4-wdt.txt        |   35 ++++++++++++++++++++
>   1 file changed, 35 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
> new file mode 100644
> index 0000000..f7cc7c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
> @@ -0,0 +1,35 @@
> +* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
> +
> +Required properties:
> +- compatible: "atmel,sama5d4-wdt"
> +- reg: base physical address and length of memory mapped region.
> +
> +Optional properties:
> +- timeout-sec: watchdog timeout value (in seconds).
> +- interrupts: interrupt number to the CPU.
> +- atmel,watchdog-type: should be "hardware" or "software".
> +	"hardware": enable watchdog fault reset. A watchdog fault triggers
> +		    watchdog reset.
> +	"software": enable watchdog fault interrupt. A watchdog fault asserts
> +		    watchdog interrupt.
> +- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
> +		   in idle state.
> +	CAUTION: This property should be used with care, it actually makes the
> +	watchdog not counting when the CPU is in idle state, therefore the
> +	watchdog reset time depends on mean CPU usage and will not reset at all
> +	if the CPU stop working while it is in idle state, which is probably
> +	not what you want.
> +- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
> +		  in debug state.
> +
> +Example:
> +	watchdog@fc068640 {
> +		compatible = "atmel,sama5d4-wdt";
> +		reg = <0xfc068640 0x10>;
> +		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
> +		timeout-sec = <10>;
> +		atmel,watchdog-type = "hardware";
> +		atmel,dbg-halt;
> +		atmel,idle-halt;
> +		status = "okay";
> +	};
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web