Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1200157 > unrolled thread

Re: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write

Started byMarek Vasut <marex@denx.de>
First post2015-08-04 18:50 +0200
Last post2015-08-05 11:20 +0200
Articles 3 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write Marek Vasut <marex@denx.de> - 2015-08-04 18:50 +0200
    Re: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write Michal Suchanek <hramrach@gmail.com> - 2015-08-05 10:30 +0200
      Re: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write Marek Vasut <marex@denx.de> - 2015-08-05 11:20 +0200

#1200157 — Re: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write

FromMarek Vasut <marex@denx.de>
Date2015-08-04 18:50 +0200
SubjectRe: [PATCH v2 1/6] mtd: spi-nor: change return value of read/write
Message-ID<pTNzB-7Ny-15@gated-at.bofh.it>
On Tuesday, August 04, 2015 at 08:42:51 AM, Michal Suchanek wrote:
> On 3 August 2015 at 23:46, Marek Vasut <marex@denx.de> wrote:
> > On Monday, August 03, 2015 at 08:39:01 PM, Michal Suchanek wrote:
> >> Change the return value of spi-nor device read and write methods to
> >> allow returning amount of data transferred and errors as
> >> read(2)/write(2) does.
> >> 
> >> Signed-off-by: Michal Suchanek <hramrach@gmail.com>
> >> ---
> >> 
> >>  include/linux/mtd/spi-nor.h | 4 ++--
> >>  1 file changed, 2 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> >> index e540952..7d782cb 100644
> >> --- a/include/linux/mtd/spi-nor.h
> >> +++ b/include/linux/mtd/spi-nor.h
> >> @@ -185,9 +185,9 @@ struct spi_nor {
> >> 
> >>       int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
> >>       
> >>                       int write_enable);
> >> 
> >> -     int (*read)(struct spi_nor *nor, loff_t from,
> >> +     ssize_t (*read)(struct spi_nor *nor, loff_t from,
> >> 
> >>                       size_t len, size_t *retlen, u_char *read_buf);
> >> 
> >> -     void (*write)(struct spi_nor *nor, loff_t to,
> >> +     ssize_t (*write)(struct spi_nor *nor, loff_t to,
> >> 
> >>                       size_t len, size_t *retlen, const u_char
> >>                       *write_buf);
> >>       
> >>       int (*erase)(struct spi_nor *nor, loff_t offs);
> > 
> > You realize that if someone does bisect and has only this patch applied,
> > the compiler will complain loudly about mismatching data types, right ?
> > :)
> 
> Yes, the compiler prints a warning. However, only the return value
> which is not used changes so it should not cause any real problem.

Are you certain that ssize_t is equal to int , always , everywhere ? :-)
Note that it is possible to do such conversion even without introducing
compiler warnings along the way -- just do the data type conversion first
and the other changes in subsequent patches. It will be clear that one
patch does one thing then.

> The
> data type in the fsl-quadspi and m25p80 drivers is matched in the
> following two patches.
> 
> Thanks
> 
> Michal

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1200520

FromMichal Suchanek <hramrach@gmail.com>
Date2015-08-05 10:30 +0200
Message-ID<pU2ff-4cC-5@gated-at.bofh.it>
In reply to#1200157
On 4 August 2015 at 18:42, Marek Vasut <marex@denx.de> wrote:
> On Tuesday, August 04, 2015 at 08:42:51 AM, Michal Suchanek wrote:
>> On 3 August 2015 at 23:46, Marek Vasut <marex@denx.de> wrote:
>> > On Monday, August 03, 2015 at 08:39:01 PM, Michal Suchanek wrote:
>> >> Change the return value of spi-nor device read and write methods to
>> >> allow returning amount of data transferred and errors as
>> >> read(2)/write(2) does.
>> >>
>> >> Signed-off-by: Michal Suchanek <hramrach@gmail.com>
>> >> ---
>> >>
>> >>  include/linux/mtd/spi-nor.h | 4 ++--
>> >>  1 file changed, 2 insertions(+), 2 deletions(-)
>> >>
>> >> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> >> index e540952..7d782cb 100644
>> >> --- a/include/linux/mtd/spi-nor.h
>> >> +++ b/include/linux/mtd/spi-nor.h
>> >> @@ -185,9 +185,9 @@ struct spi_nor {
>> >>
>> >>       int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
>> >>
>> >>                       int write_enable);
>> >>
>> >> -     int (*read)(struct spi_nor *nor, loff_t from,
>> >> +     ssize_t (*read)(struct spi_nor *nor, loff_t from,
>> >>
>> >>                       size_t len, size_t *retlen, u_char *read_buf);
>> >>
>> >> -     void (*write)(struct spi_nor *nor, loff_t to,
>> >> +     ssize_t (*write)(struct spi_nor *nor, loff_t to,
>> >>
>> >>                       size_t len, size_t *retlen, const u_char
>> >>                       *write_buf);
>> >>
>> >>       int (*erase)(struct spi_nor *nor, loff_t offs);
>> >
>> > You realize that if someone does bisect and has only this patch applied,
>> > the compiler will complain loudly about mismatching data types, right ?
>> > :)
>>
>> Yes, the compiler prints a warning. However, only the return value
>> which is not used changes so it should not cause any real problem.
>
> Are you certain that ssize_t is equal to int , always , everywhere ? :-)

No, it's larger or equal.

> Note that it is possible to do such conversion even without introducing
> compiler warnings along the way -- just do the data type conversion first
> and the other changes in subsequent patches. It will be clear that one
> patch does one thing then.

If this is the only concern with these patches it is easily amended ;-)

Thanks

Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]


#1200565

FromMarek Vasut <marex@denx.de>
Date2015-08-05 11:20 +0200
Message-ID<pU31E-5mp-5@gated-at.bofh.it>
In reply to#1200520
On Wednesday, August 05, 2015 at 10:27:05 AM, Michal Suchanek wrote:
> On 4 August 2015 at 18:42, Marek Vasut <marex@denx.de> wrote:
> > On Tuesday, August 04, 2015 at 08:42:51 AM, Michal Suchanek wrote:
> >> On 3 August 2015 at 23:46, Marek Vasut <marex@denx.de> wrote:
> >> > On Monday, August 03, 2015 at 08:39:01 PM, Michal Suchanek wrote:
> >> >> Change the return value of spi-nor device read and write methods to
> >> >> allow returning amount of data transferred and errors as
> >> >> read(2)/write(2) does.
> >> >> 
> >> >> Signed-off-by: Michal Suchanek <hramrach@gmail.com>
> >> >> ---
> >> >> 
> >> >>  include/linux/mtd/spi-nor.h | 4 ++--
> >> >>  1 file changed, 2 insertions(+), 2 deletions(-)
> >> >> 
> >> >> diff --git a/include/linux/mtd/spi-nor.h
> >> >> b/include/linux/mtd/spi-nor.h index e540952..7d782cb 100644
> >> >> --- a/include/linux/mtd/spi-nor.h
> >> >> +++ b/include/linux/mtd/spi-nor.h
> >> >> @@ -185,9 +185,9 @@ struct spi_nor {
> >> >> 
> >> >>       int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int
> >> >>       len,
> >> >>       
> >> >>                       int write_enable);
> >> >> 
> >> >> -     int (*read)(struct spi_nor *nor, loff_t from,
> >> >> +     ssize_t (*read)(struct spi_nor *nor, loff_t from,
> >> >> 
> >> >>                       size_t len, size_t *retlen, u_char *read_buf);
> >> >> 
> >> >> -     void (*write)(struct spi_nor *nor, loff_t to,
> >> >> +     ssize_t (*write)(struct spi_nor *nor, loff_t to,
> >> >> 
> >> >>                       size_t len, size_t *retlen, const u_char
> >> >>                       *write_buf);
> >> >>       
> >> >>       int (*erase)(struct spi_nor *nor, loff_t offs);
> >> > 
> >> > You realize that if someone does bisect and has only this patch
> >> > applied, the compiler will complain loudly about mismatching data
> >> > types, right ?
> >> > 
> >> > :)
> >> 
> >> Yes, the compiler prints a warning. However, only the return value
> >> which is not used changes so it should not cause any real problem.
> > 
> > Are you certain that ssize_t is equal to int , always , everywhere ? :-)
> 
> No, it's larger or equal.

Not per any standard to my knowledge, but yeah.  I don't think it's a good
idea to do this change alone.

> > Note that it is possible to do such conversion even without introducing
> > compiler warnings along the way -- just do the data type conversion first
> > and the other changes in subsequent patches. It will be clear that one
> > patch does one thing then.
> 
> If this is the only concern with these patches it is easily amended ;-)

It'd be nice if the others reviewed it as well, additional feedback would be 
nice.

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web