Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1200352 > unrolled thread

Re: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver

Started byAlexandre Belloni <alexandre.belloni@free-electrons.com>
First post2015-08-05 04:00 +0200
Last post2015-08-05 09:30 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063  RTC driver Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2015-08-05 04:00 +0200
    RE: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063  RTC driver "Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com> - 2015-08-05 09:30 +0200

#1200352 — Re: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver

FromAlexandre Belloni <alexandre.belloni@free-electrons.com>
Date2015-08-05 04:00 +0200
SubjectRe: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
Message-ID<pTW9Q-3AW-9@gated-at.bofh.it>
On 21/07/2015 at 11:29:07 +0100, S Twiss wrote :
> From: S Twiss <stwiss.opensource@diasemi.com>
> 
> Add DA9062 RTC support into the existing DA9063 RTC driver component by
> using generic access tables for common register and bit mask definitions.
> 
> The following change will add generic register and bit mask support to the
> DA9063 RTC. The changes are slightly complicated by requiring support for
> three register sets: DA9063-AD, DA9063-BB and DA9062-AA.
> 
> The following alterations have been made to the DA9063 RTC:
> 
> - Addition of a da9063_compatible_rtc_regmap structure to hold all generic
>   registers and bitmasks for this type of RTC component.
> - A re-write of struct da9063 to use pointers for regmap and compatible
>   registers/masks definitions
> - Addition of a of_device_id table for DA9063 and DA9062 defaults
> - Refactoring functions to use struct da9063_compatible_rtc accesses to
>   generic registers/masks instead of using defines from registers.h
> - Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap()
>   to provide initialisation of generic registers and masks and access to
>   regmap
> 
> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1200475

From"Opensource [Steve Twiss]" <stwiss.opensource@diasemi.com>
Date2015-08-05 09:30 +0200
Message-ID<pU1jb-2Rg-9@gated-at.bofh.it>
In reply to#1200352
On 05 August 2015 02:55 Alexandre Belloni wrote:

> Subject: Re: [PATCH V3 3/3] rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
> 
> On 21/07/2015 at 11:29:07 +0100, S Twiss wrote :
> > From: S Twiss <stwiss.opensource@diasemi.com>
> >
> > Add DA9062 RTC support into the existing DA9063 RTC driver component by
> > using generic access tables for common register and bit mask definitions.
> >
> > The following change will add generic register and bit mask support to the
> > DA9063 RTC. The changes are slightly complicated by requiring support for
> > three register sets: DA9063-AD, DA9063-BB and DA9062-AA.
> >
> > The following alterations have been made to the DA9063 RTC:
> >
> > - Addition of a da9063_compatible_rtc_regmap structure to hold all generic
> >   registers and bitmasks for this type of RTC component.
> > - A re-write of struct da9063 to use pointers for regmap and compatible
> >   registers/masks definitions
> > - Addition of a of_device_id table for DA9063 and DA9062 defaults
> > - Refactoring functions to use struct da9063_compatible_rtc accesses to
> >   generic registers/masks instead of using defines from registers.h
> > - Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap()
> >   to provide initialisation of generic registers and masks and access to
> >   regmap
> >
> > Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
> >
> Applied, thanks.

Thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web