Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1200077 > unrolled thread

[PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I <kishon@ti.com> - 2015-08-04 17:30 +0200
    Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off  the PHY during probe Felipe Balbi <balbi@ti.com> - 2015-08-04 18:10 +0200
      Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off  the PHY during probe Kishon Vijay Abraham I <kishon@ti.com> - 2015-08-05 16:20 +0200
        Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off  the PHY during probe Felipe Balbi <balbi@ti.com> - 2015-08-05 17:40 +0200

#1200077 — [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
to power off the PHY.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
---
 drivers/phy/phy-ti-pipe3.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 072d308..9782c16 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -474,8 +474,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	omap_control_phy_power(phy->control_dev, 0);
-
 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(phy->dev);
 
@@ -494,6 +492,8 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		return PTR_ERR(generic_phy);
 
 	phy_set_drvdata(generic_phy, phy);
+	ti_pipe3_power_off(generic_phy);
+
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 			of_phy_simple_xlate);
 	if (IS_ERR(phy_provider))
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1200123 — Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

[Multipart message — attachments visible in raw view] — view raw

On Tue, Aug 04, 2015 at 08:50:41PM +0530, Kishon Vijay Abraham I wrote:
> No functional change. Previously omap_control_phy_power() was used to power

there is a slight functional change. You moved PHY power off from before
to after pm_runtime_enable(), clk_prepare_enable() and creation of the
PHY device. That ought to have a slight impact on how the driver
behaves.

-- 
balbi

[toc] | [prev] | [next] | [standalone]

#1200819 — Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

Hi,

On Tuesday 04 August 2015 09:36 PM, Felipe Balbi wrote:
> On Tue, Aug 04, 2015 at 08:50:41PM +0530, Kishon Vijay Abraham I wrote:
>> No functional change. Previously omap_control_phy_power() was used to power
> 
> there is a slight functional change. You moved PHY power off from before
> to after pm_runtime_enable(), clk_prepare_enable() and creation of the
> PHY device. That ought to have a slight impact on how the driver
> behaves.

okay. I'll modify the commit log. I think it won't impact the functionality as
such since the ->init and ->power_on callbacks won't be invoked at that point.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1200919 — Re: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

[Multipart message — attachments visible in raw view] — view raw

On Wed, Aug 05, 2015 at 07:42:24PM +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Tuesday 04 August 2015 09:36 PM, Felipe Balbi wrote:
> > On Tue, Aug 04, 2015 at 08:50:41PM +0530, Kishon Vijay Abraham I wrote:
> >> No functional change. Previously omap_control_phy_power() was used to power
> > 
> > there is a slight functional change. You moved PHY power off from before
> > to after pm_runtime_enable(), clk_prepare_enable() and creation of the
> > PHY device. That ought to have a slight impact on how the driver
> > behaves.
> 
> okay. I'll modify the commit log. I think it won't impact the functionality as
> such since the ->init and ->power_on callbacks won't be invoked at that point.

all right, then

-- 
balbi

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web