Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1197214 > unrolled thread

Re: [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI,  PWM, DMA_SUN6I, cryptodev Maxime Ripard <maxime.ripard@free-electrons.com> - 2015-07-31 19:10 +0200

#1197214 — Re: [PATCH v2 2/2] ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev

[Multipart message — attachments visible in raw view] — view raw

On Fri, Jul 31, 2015 at 10:56:42PM +0800, Chen-Yu Tsai wrote:
> Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
> sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/configs/multi_v7_defconfig | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 5fd8df6f50ea..5eaf39ce134e 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -301,6 +301,7 @@ CONFIG_I2C_S3C2410=y
>  CONFIG_I2C_SH_MOBILE=y
>  CONFIG_I2C_SIRF=y
>  CONFIG_I2C_ST=y
> +CONFIG_I2C_SUN6I_P2WI=y
>  CONFIG_I2C_TEGRA=y
>  CONFIG_I2C_XILINX=y
>  CONFIG_I2C_RCAR=y
> @@ -587,6 +588,7 @@ CONFIG_IMX_DMA=y
>  CONFIG_MXS_DMA=y
>  CONFIG_DMA_OMAP=y
>  CONFIG_XILINX_VDMA=y
> +CONFIG_DMA_SUN6I=y
>  CONFIG_STAGING=y
>  CONFIG_SENSORS_ISL29018=y
>  CONFIG_SENSORS_ISL29028=y
> @@ -612,6 +614,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y
>  CONFIG_PM_DEVFREQ=y
>  CONFIG_ARM_TEGRA_DEVFREQ=m
>  CONFIG_MEMORY=y
> +CONFIG_EXTCON=y
>  CONFIG_TI_AEMIF=y
>  CONFIG_IIO=y
>  CONFIG_AT91_ADC=m
> @@ -622,6 +625,7 @@ CONFIG_PWM_ATMEL=m
>  CONFIG_PWM_ATMEL_TCB=m
>  CONFIG_PWM_RENESAS_TPU=y
>  CONFIG_PWM_SAMSUNG=m
> +CONFIG_PWM_SUN4I=y
>  CONFIG_PWM_TEGRA=y
>  CONFIG_PWM_VT8500=y
>  CONFIG_PHY_HIX5HD2_SATA=y
> @@ -660,6 +664,7 @@ CONFIG_LOCKUP_DETECTOR=y
>  CONFIG_CRYPTO_DEV_TEGRA_AES=y
>  CONFIG_CPUFREQ_DT=y
>  CONFIG_KEYSTONE_IRQ=y
> +CONFIG_CRYPTO_DEV_SUN4I_SS=m

Why do you enable it as a module?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web