Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1193792 > unrolled thread

Re: [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset  controller. Michal Simek <monstr@monstr.eu> - 2015-07-28 07:50 +0200

#1193792 — Re: [RFCv2 2/3] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.

[Multipart message — attachments visible in raw view] — view raw

On 07/28/2015 07:03 AM, Moritz Fischer wrote:
> Hi Michal,
> 
> I agree we need to be careful with changing the bindings.
> 
> On Sun, Jul 26, 2015 at 11:56 PM, Michal Simek <monstr@monstr.eu> wrote:
>> Hi Moritz,
>>
>> On 07/25/2015 02:21 AM, Moritz Fischer wrote:
>>> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
>>> ---
>>>  arch/arm/boot/dts/zynq-7000.dtsi            | 43 ++++++++++++-
>>
>> This patch is nice in general but every change in binding should be
>> discussed separately. There is also necessary to wire them up in the
>> driver to do action. That's why I think that will be the best just to
>> add the code to slcr and keep others untouched.
> 
> Ok, just to clarify: You'd suggest to just add the rstc as child node
> to the slcr,
> and leave the other nodes untouched?

yes and then add it on case-by-case basis.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web