Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1193162 > unrolled thread

[PATCH v5 0/8] iio: mma8452: improve driver and support more chips

Back to article view | Back to linux.kernel

Contents

  [PATCH v5 0/8] iio: mma8452: improve driver and support more chips Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200
    [PATCH 1/8] iio: mma8452: refactor for seperating chip specific data Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200
    [PATCH 4/8] iio: mma8452: add support for MMA8652FC and MMA8653FC accelerometers Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200
    [PATCH 2/8] iio: mma8452: add support for MMA8453Q accelerometer chip Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200
    [PATCH 3/8] iio: mma8452: add freefall / motion interrupt source Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200
    [PATCH 6/8] iio: mma8452: add copyright notice comment Martin Kepplinger <martink@posteo.de> - 2015-07-27 16:20 +0200

#1193162 — [PATCH v5 0/8] iio: mma8452: improve driver and support more chips

Before I go away for holidays, this is version 5 of the mma8452 driver
improvements. This version removes the unnessasary DRIVER_NAME define and
improves the DT property "use_int2" to be extendible for any future additions
to the driver.

This is based on today's -next.


These changes add support for motion interrupts and 3 more accelerometer
chips, two of which use them because they don't support the until now
included transient interrupt sources:

MMA8453Q, MMA8652FC and MMA8653FC; datasheets are in the commit messages.
The driver and module name remains the same, seperating it from the device
names it now supports.

On top of this, there are minor documentation additions, and more notably,
it allows to use the driver, no matter how the interrupt pins are wired
on your board.

Please review and test if you can. For MMA8452Q, nothing should have
changed.

revision history
----------------
v5   DRIVER_NAME define removed; more flexible DT property
v4   cleanup; one bugfix patch removed from series; DT people added
v3   adds one patch to allow all possible pin wirings; adds more email
recipients
v2   splits the work into a series of smaller pieces
v1   initial post


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1193165 — [PATCH 1/8] iio: mma8452: refactor for seperating chip specific data

This adds a struct mma_chip_info to hold data that will remain specific to
the chip in use. It is provided during probe() and linked in
struct of_device_id.

Also this suggests that the driver is called "mma8452" and now handles the
MMA8452Q device, but is not limited to it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
---
 drivers/iio/accel/mma8452.c | 185 ++++++++++++++++++++++++++++++++------------
 1 file changed, 136 insertions(+), 49 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 13ea1ea..8965517 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -23,6 +23,7 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/events.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #define MMA8452_STATUS 0x00
 #define MMA8452_OUT_X 0x01 /* MSB first, 12-bit  */
@@ -78,6 +79,52 @@ struct mma8452_data {
 	struct mutex lock;
 	u8 ctrl_reg1;
 	u8 data_cfg;
+	const struct mma_chip_info *chip_info;
+};
+
+/**
+ * struct mma_chip_info - chip specific data for Freescale's accelerometers
+ * @chip_id:			WHO_AM_I register's value
+ * @channels:			struct iio_chan_spec matching the device's
+ *				capabilities
+ * @num_channels:		number of channels
+ * @mma_scales:			scale factors for converting register values
+ *				to m/s^2; 3 modes: 2g, 4g, 8g; 2 integers
+ *				per mode: m/s^2 and micro m/s^2
+ * @ev_cfg:			event config register address
+ * @ev_cfg_ele:			latch bit in event config register
+ * @ev_cfg_chan_shift:		number of the bit to enable events in X
+ *				direction; in event config register
+ * @ev_src:			event source register address
+ * @ev_src_xe:			bit in event source register that indicates
+ *				an event in X direction
+ * @ev_src_ye:			bit in event source register that indicates
+ *				an event in Y direction
+ * @ev_src_ze:			bit in event source register that indicates
+ *				an event in Z direction
+ * @ev_ths:			event threshold register address
+ * @ev_ths_mask:		mask for the threshold value
+ * @ev_count:			event count (period) register address
+ *
+ * Since not all chips supported by the driver support comparing high pass
+ * filtered data for events (interrupts), different interrupt sources are
+ * used for different chips and the relevant registers are included here.
+ */
+struct mma_chip_info {
+	u8 chip_id;
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	const int mma_scales[3][2];
+	u8 ev_cfg;
+	u8 ev_cfg_ele;
+	u8 ev_cfg_chan_shift;
+	u8 ev_src;
+	u8 ev_src_xe;
+	u8 ev_src_ye;
+	u8 ev_src_ze;
+	u8 ev_ths;
+	u8 ev_ths_mask;
+	u8 ev_count;
 };
 
 static int mma8452_drdy(struct mma8452_data *data)
@@ -143,16 +190,6 @@ static const int mma8452_samp_freq[8][2] = {
 	{6, 250000}, {1, 560000}
 };
 
-/*
- * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
- * The userspace interface uses m/s^2 and we declare micro units
- * So scale factor is given by:
- * 	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
- */
-static const int mma8452_scales[3][2] = {
-	{0, 9577}, {0, 19154}, {0, 38307}
-};
-
 /* Datasheet table 35  (step time vs sample frequency) */
 static const int mma8452_transient_time_step_us[8] = {
 	1250,
@@ -187,8 +224,11 @@ static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
 static ssize_t mma8452_show_scale_avail(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	return mma8452_show_int_plus_micros(buf, mma8452_scales,
-		ARRAY_SIZE(mma8452_scales));
+	struct mma8452_data *data = iio_priv(i2c_get_clientdata(
+					     to_i2c_client(dev)));
+
+	return mma8452_show_int_plus_micros(buf, data->chip_info->mma_scales,
+		ARRAY_SIZE(data->chip_info->mma_scales));
 }
 
 static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev,
@@ -219,8 +259,8 @@ static int mma8452_get_samp_freq_index(struct mma8452_data *data,
 static int mma8452_get_scale_index(struct mma8452_data *data,
 	int val, int val2)
 {
-	return mma8452_get_int_plus_micros_index(mma8452_scales,
-		ARRAY_SIZE(mma8452_scales), val, val2);
+	return mma8452_get_int_plus_micros_index(data->chip_info->mma_scales,
+		ARRAY_SIZE(data->chip_info->mma_scales), val, val2);
 }
 
 static int mma8452_get_hp_filter_index(struct mma8452_data *data,
@@ -229,7 +269,7 @@ static int mma8452_get_hp_filter_index(struct mma8452_data *data,
 	int i = mma8452_get_odr_index(data);
 
 	return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i],
-		ARRAY_SIZE(mma8452_scales[0]), val, val2);
+		ARRAY_SIZE(data->chip_info->mma_scales[0]), val, val2);
 }
 
 static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
@@ -266,13 +306,14 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
 		mutex_unlock(&data->lock);
 		if (ret < 0)
 			return ret;
-		*val = sign_extend32(
-			be16_to_cpu(buffer[chan->scan_index]) >> 4, 11);
+		*val = sign_extend32(be16_to_cpu(
+			buffer[chan->scan_index]) >> chan->scan_type.shift,
+			chan->scan_type.realbits - 1);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK;
-		*val = mma8452_scales[i][0];
-		*val2 = mma8452_scales[i][1];
+		*val = data->chip_info->mma_scales[i][0];
+		*val2 = data->chip_info->mma_scales[i][1];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		i = mma8452_get_odr_index(data);
@@ -420,16 +461,16 @@ static int mma8452_read_thresh(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		ret = i2c_smbus_read_byte_data(data->client,
-					       MMA8452_TRANSIENT_THS);
+					       data->chip_info->ev_ths);
 		if (ret < 0)
 			return ret;
 
-		*val = ret & MMA8452_TRANSIENT_THS_MASK;
+		*val = ret & data->chip_info->ev_ths_mask;
 		return IIO_VAL_INT;
 
 	case IIO_EV_INFO_PERIOD:
 		ret = i2c_smbus_read_byte_data(data->client,
-					       MMA8452_TRANSIENT_COUNT);
+					       data->chip_info->ev_count);
 		if (ret < 0)
 			return ret;
 
@@ -472,8 +513,11 @@ static int mma8452_write_thresh(struct iio_dev *indio_dev,
 
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
-		return mma8452_change_config(data, MMA8452_TRANSIENT_THS,
-					     val & MMA8452_TRANSIENT_THS_MASK);
+		if (val < 0 || val > 127) /* LSB 0.6178 m/s^2 */
+			return -EINVAL;
+
+		return mma8452_change_config(data, data->chip_info->ev_ths,
+					     val);
 
 	case IIO_EV_INFO_PERIOD:
 		steps = (val * USEC_PER_SEC + val2) /
@@ -483,7 +527,7 @@ static int mma8452_write_thresh(struct iio_dev *indio_dev,
 		if (steps > 0xff)
 			return -EINVAL;
 
-		return mma8452_change_config(data, MMA8452_TRANSIENT_COUNT,
+		return mma8452_change_config(data, data->chip_info->ev_count,
 					     steps);
 	case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
 		reg = i2c_smbus_read_byte_data(data->client,
@@ -512,13 +556,15 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
 				     enum iio_event_direction dir)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
+	const struct mma_chip_info *chip = data->chip_info;
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG);
+	ret = i2c_smbus_read_byte_data(data->client,
+				       data->chip_info->ev_cfg);
 	if (ret < 0)
 		return ret;
 
-	return ret & MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index) ? 1 : 0;
+	return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift));
 }
 
 static int mma8452_write_event_config(struct iio_dev *indio_dev,
@@ -528,20 +574,21 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
 				      int state)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
+	const struct mma_chip_info *chip = data->chip_info;
 	int val;
 
-	val = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG);
+	val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
 	if (val < 0)
 		return val;
 
 	if (state)
-		val |= MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index);
+		val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
 	else
-		val &= ~MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index);
+		val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
 
 	val |= MMA8452_TRANSIENT_CFG_ELE;
 
-	return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, val);
+	return mma8452_change_config(data, chip->ev_cfg, val);
 }
 
 static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
@@ -550,25 +597,25 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
 	s64 ts = iio_get_time_ns();
 	int src;
 
-	src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC);
+	src = i2c_smbus_read_byte_data(data->client, data->chip_info->ev_src);
 	if (src < 0)
 		return;
 
-	if (src & MMA8452_TRANSIENT_SRC_XTRANSE)
+	if (src & data->chip_info->ev_src_xe)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
 						  IIO_EV_TYPE_MAG,
 						  IIO_EV_DIR_RISING),
 			       ts);
 
-	if (src & MMA8452_TRANSIENT_SRC_YTRANSE)
+	if (src & data->chip_info->ev_src_ye)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y,
 						  IIO_EV_TYPE_MAG,
 						  IIO_EV_DIR_RISING),
 			       ts);
 
-	if (src & MMA8452_TRANSIENT_SRC_ZTRANSE)
+	if (src & data->chip_info->ev_src_ze)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z,
 						  IIO_EV_TYPE_MAG,
@@ -669,7 +716,7 @@ static struct attribute_group mma8452_event_attribute_group = {
 	.name = "events",
 };
 
-#define MMA8452_CHANNEL(axis, idx) { \
+#define MMA8452_CHANNEL(axis, idx, bits) { \
 	.type = IIO_ACCEL, \
 	.modified = 1, \
 	.channel2 = IIO_MOD_##axis, \
@@ -681,9 +728,9 @@ static struct attribute_group mma8452_event_attribute_group = {
 	.scan_index = idx, \
 	.scan_type = { \
 		.sign = 's', \
-		.realbits = 12, \
+		.realbits = (bits), \
 		.storagebits = 16, \
-		.shift = 4, \
+		.shift = 16 - (bits), \
 		.endianness = IIO_BE, \
 	}, \
 	.event_spec = mma8452_transient_event, \
@@ -691,12 +738,41 @@ static struct attribute_group mma8452_event_attribute_group = {
 }
 
 static const struct iio_chan_spec mma8452_channels[] = {
-	MMA8452_CHANNEL(X, 0),
-	MMA8452_CHANNEL(Y, 1),
-	MMA8452_CHANNEL(Z, 2),
+	MMA8452_CHANNEL(X, 0, 12),
+	MMA8452_CHANNEL(Y, 1, 12),
+	MMA8452_CHANNEL(Z, 2, 12),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+enum {
+	mma8452,
+};
+
+static const struct mma_chip_info mma_chip_info_table[] = {
+	[mma8452] = {
+		.chip_id = MMA8452_DEVICE_ID,
+		.channels = mma8452_channels,
+		.num_channels = ARRAY_SIZE(mma8452_channels),
+		/*
+		 * Hardware has fullscale of -2G, -4G, -8G corresponding to
+		 * raw value -2048 for 12 bit or -512 for 10 bit.
+		 * The userspace interface uses m/s^2 and we declare micro units
+		 * So scale factor for 12 bit here is given by:
+		 *	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+		 */
+		.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
+		.ev_cfg = MMA8452_TRANSIENT_CFG,
+		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+		.ev_cfg_chan_shift = 1,
+		.ev_src = MMA8452_TRANSIENT_SRC,
+		.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+		.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+		.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+		.ev_ths = MMA8452_TRANSIENT_THS,
+		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+		.ev_count = MMA8452_TRANSIENT_COUNT,
+	},
+};
 static struct attribute *mma8452_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
@@ -813,12 +889,18 @@ static int mma8452_reset(struct i2c_client *client)
 	return -ETIMEDOUT;
 }
 
+static const struct of_device_id mma8452_dt_ids[] = {
+	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
+	{ }
+};
+
 static int mma8452_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct mma8452_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
+	const struct of_device_id *match;
 
 	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
 	if (ret < 0)
@@ -826,6 +908,12 @@ static int mma8452_probe(struct i2c_client *client,
 	if (ret != MMA8452_DEVICE_ID)
 		return -ENODEV;
 
+	match = of_match_device(mma8452_dt_ids, &client->dev);
+	if (!match) {
+		dev_err(&client->dev, "unknown device model\n");
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -833,14 +921,18 @@ static int mma8452_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	data->client = client;
 	mutex_init(&data->lock);
+	data->chip_info = match->data;
+
+	dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
+		 match->compatible, data->chip_info->chip_id);
 
 	i2c_set_clientdata(client, indio_dev);
 	indio_dev->info = &mma8452_info;
 	indio_dev->name = id->name;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = mma8452_channels;
-	indio_dev->num_channels = ARRAY_SIZE(mma8452_channels);
+	indio_dev->channels = data->chip_info->channels;
+	indio_dev->num_channels = data->chip_info->num_channels;
 	indio_dev->available_scan_masks = mma8452_scan_masks;
 
 	ret = mma8452_reset(client);
@@ -959,16 +1051,11 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
 #endif
 
 static const struct i2c_device_id mma8452_id[] = {
-	{ "mma8452", 0 },
+	{ "mma8452", mma8452 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);
 
-static const struct of_device_id mma8452_dt_ids[] = {
-	{ .compatible = "fsl,mma8452" },
-	{ }
-};
-
 static struct i2c_driver mma8452_driver = {
 	.driver = {
 		.name	= "mma8452",
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193168 — [PATCH 4/8] iio: mma8452: add support for MMA8652FC and MMA8653FC accelerometers

MMA8652FC and MMA8653FC don't provide the transient interrupt source, so
the motion interrupt source is used by providing a new iio_chan_spec
definition, so that other supported devices are not affected by this.

Datasheets for the newly supported devices are available at Freescale's
website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8653FC.pdf

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
---
 drivers/iio/accel/Kconfig   |  2 +-
 drivers/iio/accel/mma8452.c | 98 +++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 92 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index dc80dc9..fdb59e0 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -93,7 +93,7 @@ config MMA8452
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the following Freescale 3-axis
-	  accelerometers: MMA8452Q, MMA8453Q.
+	  accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index d51ce63..5a8c738 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -3,6 +3,8 @@
  *
  *	MMA8452Q
  *	MMA8453Q
+ *	MMA8652FC
+ *	MMA8653FC
  *
  * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -87,6 +89,8 @@
 
 #define MMA8452_DEVICE_ID 0x2a
 #define MMA8453_DEVICE_ID 0x3a
+#define MMA8652_DEVICE_ID 0x4a
+#define MMA8653_DEVICE_ID 0x5a
 
 struct mma8452_data {
 	struct i2c_client *client;
@@ -766,6 +770,26 @@ static struct attribute_group mma8452_event_attribute_group = {
 	.num_event_specs = ARRAY_SIZE(mma8452_transient_event), \
 }
 
+#define MMA8652_CHANNEL(axis, idx, bits) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_CALIBBIAS), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_index = idx, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.shift = 16 - (bits), \
+		.endianness = IIO_BE, \
+	}, \
+	.event_spec = mma8452_motion_event, \
+	.num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
+}
+
 static const struct iio_chan_spec mma8452_channels[] = {
 	MMA8452_CHANNEL(X, 0, 12),
 	MMA8452_CHANNEL(Y, 1, 12),
@@ -780,9 +804,25 @@ static const struct iio_chan_spec mma8453_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec mma8652_channels[] = {
+	MMA8652_CHANNEL(X, 0, 12),
+	MMA8652_CHANNEL(Y, 1, 12),
+	MMA8652_CHANNEL(Z, 2, 12),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec mma8653_channels[] = {
+	MMA8652_CHANNEL(X, 0, 10),
+	MMA8652_CHANNEL(Y, 1, 10),
+	MMA8652_CHANNEL(Z, 2, 10),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 enum {
 	mma8452,
 	mma8453,
+	mma8652,
+	mma8653,
 };
 
 static const struct mma_chip_info mma_chip_info_table[] = {
@@ -825,6 +865,38 @@ static const struct mma_chip_info mma_chip_info_table[] = {
 		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
 		.ev_count = MMA8452_TRANSIENT_COUNT,
 	},
+	[mma8652] = {
+		.chip_id = MMA8652_DEVICE_ID,
+		.channels = mma8652_channels,
+		.num_channels = ARRAY_SIZE(mma8652_channels),
+		.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
+		.ev_cfg = MMA8452_FF_MT_CFG,
+		.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
+		.ev_cfg_chan_shift = 3,
+		.ev_src = MMA8452_FF_MT_SRC,
+		.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
+		.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
+		.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
+		.ev_ths = MMA8452_FF_MT_THS,
+		.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
+		.ev_count = MMA8452_FF_MT_COUNT,
+	},
+	[mma8653] = {
+		.chip_id = MMA8653_DEVICE_ID,
+		.channels = mma8653_channels,
+		.num_channels = ARRAY_SIZE(mma8653_channels),
+		.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+		.ev_cfg = MMA8452_FF_MT_CFG,
+		.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
+		.ev_cfg_chan_shift = 3,
+		.ev_src = MMA8452_FF_MT_SRC,
+		.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
+		.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
+		.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
+		.ev_ths = MMA8452_FF_MT_THS,
+		.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
+		.ev_count = MMA8452_FF_MT_COUNT,
+	},
 };
 
 static struct attribute *mma8452_attributes[] = {
@@ -946,6 +1018,8 @@ static int mma8452_reset(struct i2c_client *client)
 static const struct of_device_id mma8452_dt_ids[] = {
 	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
 	{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
+	{ .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
+	{ .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] },
 	{ }
 };
 
@@ -957,13 +1031,6 @@ static int mma8452_probe(struct i2c_client *client,
 	int ret;
 	const struct of_device_id *match;
 
-	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
-	if (ret < 0)
-		return ret;
-
-	if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
-		return -ENODEV;
-
 	match = of_match_device(mma8452_dt_ids, &client->dev);
 	if (!match) {
 		dev_err(&client->dev, "unknown device model\n");
@@ -979,6 +1046,21 @@ static int mma8452_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 	data->chip_info = match->data;
 
+	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case MMA8452_DEVICE_ID:
+	case MMA8453_DEVICE_ID:
+	case MMA8652_DEVICE_ID:
+	case MMA8653_DEVICE_ID:
+		if (ret == data->chip_info->chip_id)
+			break;
+	default:
+		return -ENODEV;
+	}
+
 	dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
 		 match->compatible, data->chip_info->chip_id);
 
@@ -1111,6 +1193,8 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
 static const struct i2c_device_id mma8452_id[] = {
 	{ "mma8452", mma8452 },
 	{ "mma8453", mma8453 },
+	{ "mma8652", mma8652 },
+	{ "mma8653", mma8653 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193172 — [PATCH 2/8] iio: mma8452: add support for MMA8453Q accelerometer chip

This adds support for the 10 bit version if Freescale's accelerometers
of this series. The datasheet is available at Freescale's website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
---
 drivers/iio/accel/Kconfig   |  6 +++---
 drivers/iio/accel/mma8452.c | 38 +++++++++++++++++++++++++++++++++++---
 2 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 00e7bcb..dc80dc9 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -87,13 +87,13 @@ config KXSD9
 	  will be called kxsd9.
 
 config MMA8452
-	tristate "Freescale MMA8452Q Accelerometer Driver"
+	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for the Freescale MMA8452Q 3-axis
-	  accelerometer.
+	  Say yes here to build support for the following Freescale 3-axis
+	  accelerometers: MMA8452Q, MMA8453Q.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 8965517..57b12eb 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,5 +1,8 @@
 /*
- * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ * mma8452.c - Support for following Freescale 3-axis accelerometers:
+ *
+ *	MMA8452Q
+ *	MMA8453Q
  *
  * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -26,7 +29,7 @@
 #include <linux/of_device.h>
 
 #define MMA8452_STATUS 0x00
-#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit  */
+#define MMA8452_OUT_X 0x01 /* MSB first, 10 or 12-bit  */
 #define MMA8452_OUT_Y 0x03
 #define MMA8452_OUT_Z 0x05
 #define MMA8452_INT_SRC 0x0c
@@ -73,6 +76,7 @@
 #define MMA8452_INT_TRANS	BIT(5)
 
 #define MMA8452_DEVICE_ID 0x2a
+#define MMA8453_DEVICE_ID 0x3a
 
 struct mma8452_data {
 	struct i2c_client *client;
@@ -744,8 +748,16 @@ static const struct iio_chan_spec mma8452_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec mma8453_channels[] = {
+	MMA8452_CHANNEL(X, 0, 10),
+	MMA8452_CHANNEL(Y, 1, 10),
+	MMA8452_CHANNEL(Z, 2, 10),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 enum {
 	mma8452,
+	mma8453,
 };
 
 static const struct mma_chip_info mma_chip_info_table[] = {
@@ -772,7 +784,24 @@ static const struct mma_chip_info mma_chip_info_table[] = {
 		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
 		.ev_count = MMA8452_TRANSIENT_COUNT,
 	},
+	[mma8453] = {
+		.chip_id = MMA8453_DEVICE_ID,
+		.channels = mma8453_channels,
+		.num_channels = ARRAY_SIZE(mma8453_channels),
+		.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+		.ev_cfg = MMA8452_TRANSIENT_CFG,
+		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+		.ev_cfg_chan_shift = 1,
+		.ev_src = MMA8452_TRANSIENT_SRC,
+		.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+		.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+		.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+		.ev_ths = MMA8452_TRANSIENT_THS,
+		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+		.ev_count = MMA8452_TRANSIENT_COUNT,
+	},
 };
+
 static struct attribute *mma8452_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
@@ -891,6 +920,7 @@ static int mma8452_reset(struct i2c_client *client)
 
 static const struct of_device_id mma8452_dt_ids[] = {
 	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
+	{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
 	{ }
 };
 
@@ -905,7 +935,8 @@ static int mma8452_probe(struct i2c_client *client,
 	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
 	if (ret < 0)
 		return ret;
-	if (ret != MMA8452_DEVICE_ID)
+
+	if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
 		return -ENODEV;
 
 	match = of_match_device(mma8452_dt_ids, &client->dev);
@@ -1052,6 +1083,7 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
 
 static const struct i2c_device_id mma8452_id[] = {
 	{ "mma8452", mma8452 },
+	{ "mma8453", mma8453 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193175 — [PATCH 3/8] iio: mma8452: add freefall / motion interrupt source

This adds the freefall / motion interrupt source definitions to the driver.
It is used in this series' next patch, for chips that don't support the
transient interrupt source.

The iio event type is IIO_EV_TYPE_MAG since the threshold for comparison
is no signed value. An interrupt occurs on positive and negative values
when the magnitude crosses the threshold value.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
---
 drivers/iio/accel/mma8452.c | 45 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 57b12eb..d51ce63 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -37,9 +37,18 @@
 #define MMA8452_DATA_CFG 0x0e
 #define MMA8452_HP_FILTER_CUTOFF 0x0f
 #define MMA8452_HP_FILTER_CUTOFF_SEL_MASK	(BIT(0) | BIT(1))
+#define MMA8452_FF_MT_CFG 0x15
+#define MMA8452_FF_MT_CFG_OAE			BIT(6)
+#define MMA8452_FF_MT_CFG_ELE			BIT(7)
+#define MMA8452_FF_MT_SRC 0x16
+#define MMA8452_FF_MT_SRC_XHE			BIT(1)
+#define MMA8452_FF_MT_SRC_YHE			BIT(3)
+#define MMA8452_FF_MT_SRC_ZHE			BIT(5)
+#define MMA8452_FF_MT_THS 0x17
+#define MMA8452_FF_MT_THS_MASK 0x7f
+#define MMA8452_FF_MT_COUNT 0x18
 #define MMA8452_TRANSIENT_CFG 0x1d
 #define MMA8452_TRANSIENT_CFG_ELE		BIT(4)
-#define MMA8452_TRANSIENT_CFG_CHAN(chan)	BIT(chan + 1)
 #define MMA8452_TRANSIENT_CFG_HPF_BYP		BIT(0)
 #define MMA8452_TRANSIENT_SRC 0x1e
 #define MMA8452_TRANSIENT_SRC_XTRANSE		BIT(1)
@@ -73,6 +82,7 @@
 #define MMA8452_DATA_CFG_HPF_MASK BIT(4)
 
 #define MMA8452_INT_DRDY	BIT(0)
+#define MMA8452_INT_FF_MT	BIT(2)
 #define MMA8452_INT_TRANS	BIT(5)
 
 #define MMA8452_DEVICE_ID 0x2a
@@ -590,7 +600,8 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
 	else
 		val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
 
-	val |= MMA8452_TRANSIENT_CFG_ELE;
+	val |= chip->ev_cfg_ele;
+	val |= MMA8452_FF_MT_CFG_OAE;
 
 	return mma8452_change_config(data, chip->ev_cfg, val);
 }
@@ -631,6 +642,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
 {
 	struct iio_dev *indio_dev = p;
 	struct mma8452_data *data = iio_priv(indio_dev);
+	const struct mma_chip_info *chip = data->chip_info;
 	int ret = IRQ_NONE;
 	int src;
 
@@ -643,7 +655,10 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
 		ret = IRQ_HANDLED;
 	}
 
-	if (src & MMA8452_INT_TRANS) {
+	if ((src & MMA8452_INT_TRANS &&
+	     chip->ev_src == MMA8452_TRANSIENT_SRC) ||
+	    (src & MMA8452_INT_FF_MT &&
+	     chip->ev_src == MMA8452_FF_MT_SRC)) {
 		mma8452_transient_interrupt(indio_dev);
 		ret = IRQ_HANDLED;
 	}
@@ -704,6 +719,16 @@ static const struct iio_event_spec mma8452_transient_event[] = {
 	},
 };
 
+static const struct iio_event_spec mma8452_motion_event[] = {
+	{
+		.type = IIO_EV_TYPE_MAG,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+					BIT(IIO_EV_INFO_PERIOD)
+	},
+};
+
 /*
  * Threshold is configured in fixed 8G/127 steps regardless of
  * currently selected scale for measurement.
@@ -987,13 +1012,15 @@ static int mma8452_probe(struct i2c_client *client,
 
 	if (client->irq) {
 		/*
-		 * Although we enable the transient interrupt source once and
-		 * for all here the transient event detection itself is not
-		 * enabled until userspace asks for it by
-		 * mma8452_write_event_config()
+		 * Although we enable the interrupt sources once and for
+		 * all here the event detection itself is not enabled until
+		 * userspace asks for it by mma8452_write_event_config()
 		 */
-		int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
-		int enabled_interrupts = MMA8452_INT_TRANS;
+		int supported_interrupts = MMA8452_INT_DRDY |
+					   MMA8452_INT_TRANS |
+					   MMA8452_INT_FF_MT;
+		int enabled_interrupts = MMA8452_INT_TRANS |
+					 MMA8452_INT_FF_MT;
 
 		/* Assume wired to INT1 pin */
 		ret = i2c_smbus_write_byte_data(client,
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193179 — [PATCH 6/8] iio: mma8452: add copyright notice comment

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
---
 drivers/iio/accel/mma8452.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 5a8c738..dc66815 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -6,6 +6,7 @@
  *	MMA8652FC
  *	MMA8653FC
  *
+ * Copyright 2015 Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
  * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
  * This file is subject to the terms and conditions of version 2 of
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web