Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1189976 > unrolled thread

(none)

Back to article view | Back to linux.kernel

Contents

  (none) Chunfeng Yun <chunfeng.yun@mediatek.com> - 2015-07-22 16:10 +0200
    [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun <chunfeng.yun@mediatek.com> - 2015-07-22 16:10 +0200
      Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Felipe Balbi <balbi@ti.com> - 2015-07-22 16:30 +0200
        Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs chunfeng yun <chunfeng.yun@mediatek.com> - 2015-07-26 05:00 +0200
          Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Kishon Vijay Abraham I <kishon@ti.com> - 2015-07-28 07:50 +0200
            Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs chunfeng yun <chunfeng.yun@mediatek.com> - 2015-08-01 04:50 +0200
      Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Ricky Liang <jcliang@chromium.org> - 2015-07-27 16:00 +0200
    [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun <chunfeng.yun@mediatek.com> - 2015-07-22 16:10 +0200
    [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun <chunfeng.yun@mediatek.com> - 2015-07-22 16:10 +0200
      Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host  controller Mark Rutland <mark.rutland@arm.com> - 2015-07-22 16:30 +0200
        Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI  host controller chunfeng yun <chunfeng.yun@mediatek.com> - 2015-07-26 05:50 +0200
          Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI  host controller chunfeng yun <chunfeng.yun@mediatek.com> - 2015-08-01 05:50 +0200
    [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun <chunfeng.yun@mediatek.com> - 2015-07-22 16:10 +0200
      Re: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for  mt8173 chunfeng yun <chunfeng.yun@mediatek.com> - 2015-07-26 04:50 +0200

#1189976 — (none)

From ac1e8724bfa47494223bad0af450c1a63cd2fe0c Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Wed, 22 Jul 2015 21:15:15 +0800
Subject: [PATCH 0/5] *** SUBJECT HERE ***

The patch supports MediaTek's xHCI controller.

There are some differences from xHCI spec:
1. The interval is specified in 250 * 8ns increments for Interrupt Moderation
Interval(IMODI) of the Interrupter Moderation(IMOD) register, it is 8 times as
much as that defined in xHCI spec.

2. For the value of TD Size in Normal TRB, MTK's xHCI controller defines a
number of packets that remain to be transferred for a TD after processing all
Max packets in all previous TRBs,that means don't include the current TRB's,
but in xHCI spec it includes the current ones.

3. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK
architecture defines some extra SW scheduling parameters for HW. According to
these parameters provided by SW, the xHC can easily decide whether a
synchronous endpoint should be scheduled in a specific uFrame. The extra SW
scheduling parameters are put into reserved DWs in Slot and Endpoint Context.
And a bandwidth scheduler algorithm is added to support such feature.

A usb3.0 phy driver is also added which used by mt65xx SoCs platform, it
supports two usb2.0 ports and one usb3.0 port.

Change in v3:
1. implement generic phy
2. move opperations for IPPC and wakeup from phy driver to xHCI driver
3. seperate quirk functions into a single C file to fix up dependence issue

Chunfeng Yun (5):
  dt-bindings: Add usb3.0 phy binding for MT65xx SoCs
  dt-bindings: Add a binding for Mediatek xHCI host controller
  usb: phy: add usb3.0 phy driver for mt65xx SoCs
  xhci: mediatek: support MTK xHCI host controller
  arm64: dts: mediatek: add xHCI & usb phy for mt8173

 .../devicetree/bindings/phy/phy-mt65xx-u3.txt      |  21 +
 .../devicetree/bindings/usb/mt8173-xhci.txt        |  50 ++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |  15 +
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  31 +
 drivers/phy/Kconfig                                |   9 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-mt65xx-usb3.c                      | 426 +++++++++++
 drivers/usb/host/Kconfig                           |   9 +
 drivers/usb/host/Makefile                          |   4 +
 drivers/usb/host/xhci-mtk-sch.c                    | 436 +++++++++++
 drivers/usb/host/xhci-mtk.c                        | 836 +++++++++++++++++++++
 drivers/usb/host/xhci-mtk.h                        | 135 ++++
 drivers/usb/host/xhci-ring.c                       |  35 +-
 drivers/usb/host/xhci.c                            |  19 +-
 drivers/usb/host/xhci.h                            |   1 +
 15 files changed, 2021 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
 create mode 100644 drivers/phy/phy-mt65xx-usb3.c
 create mode 100644 drivers/usb/host/xhci-mtk-sch.c
 create mode 100644 drivers/usb/host/xhci-mtk.c
 create mode 100644 drivers/usb/host/xhci-mtk.h

--
1.8.1.1.dirty

In-Reply-To: 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1189983 — [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

support usb3.0 phy of mt65xx SoCs

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/phy/Kconfig           |   9 +
 drivers/phy/Makefile          |   1 +
 drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 436 insertions(+)
 create mode 100644 drivers/phy/phy-mt65xx-usb3.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index c0e6ede..019cf8b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
 	help
 	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
 
+config PHY_MT65XX_USB3
+	tristate "Mediatek USB3.0 PHY Driver"
+	depends on ARCH_MEDIATEK && OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
+	  for mt65xx SoCs. it supports two usb2.0 ports and
+	  one usb3.0 port.
+
 config PHY_SUN4I_USB
 	tristate "Allwinner sunxi SoC USB PHY driver"
 	depends on ARCH_SUNXI && HAS_IOMEM && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f344e1b..3ceff2a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
new file mode 100644
index 0000000..5da4534
--- /dev/null
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -0,0 +1,426 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/resource.h>
+
+/*
+ * for sifslv2 register
+ * relative to USB3_SIF2_BASE base address
+ */
+#define SSUSB_SIFSLV_SPLLC	(0x0000)
+#define SSUSB_SIFSLV_U2PHY_COM_BASE	(0x0800)
+#define SSUSB_SIFSLV_U3PHYD_BASE	(0x0900)
+#define SSUSB_USB30_PHYA_SIV_B_BASE	(0x0b00)
+#define SSUSB_SIFSLV_U3PHYA_DA_BASE	(0x0c00)
+
+/*port1 refs. +0x800(refer to port0)*/
+#define U3P_PORT_INTERVAL (0x800)	/*based on port0 */
+#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
+
+#define U3P_USBPHYACR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
+#define PA0_RG_U2PLL_FORCE_ON	(0x1 << 15)
+
+#define U3P_USBPHYACR2	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
+#define PA2_RG_SIF_U2PLL_FORCE_EN	(0x1 << 18)
+
+#define U3P_USBPHYACR5	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
+#define PA5_RG_U2_HSTX_SRCTRL		(0x7 << 12)
+#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
+#define PA5_RG_U2_HS_100U_U3_EN		(0x1 << 11)
+
+#define U3P_USBPHYACR6	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
+#define PA6_RG_U2_ISO_EN		(0x1 << 31)
+#define PA6_RG_U2_BC11_SW_EN	(0x1 << 23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN	(0x1 << 20)
+
+#define U3P_U2PHYACR4	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
+#define P2C_RG_USB20_GPIO_CTL	(0x1 << 9)
+#define P2C_USB20_GPIO_MODE	(0x1 << 8)
+#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3D_U2PHYDCR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
+#define P2C_RG_SIF_U2PLL_FORCE_ON	(0x1 << 24)
+
+#define U3P_U2PHYDTM0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
+#define P2C_FORCE_UART_EN	(0x1 << 26)
+#define P2C_FORCE_DATAIN	(0x1 << 23)
+#define P2C_FORCE_DM_PULLDOWN	(0x1 << 21)
+#define P2C_FORCE_DP_PULLDOWN	(0x1 << 20)
+#define P2C_FORCE_XCVRSEL	(0x1 << 19)
+#define P2C_FORCE_SUSPENDM	(0x1 << 18)
+#define P2C_FORCE_TERMSEL	(0x1 << 17)
+#define P2C_RG_DATAIN		(0xf << 10)
+#define P2C_RG_DATAIN_VAL(x)	((0xf & (x)) << 10)
+#define P2C_RG_DMPULLDOWN	(0x1 << 7)
+#define P2C_RG_DPPULLDOWN	(0x1 << 6)
+#define P2C_RG_XCVRSEL		(0x3 << 4)
+#define P2C_RG_XCVRSEL_VAL(x)	((0x3 & (x)) << 4)
+#define P2C_RG_SUSPENDM		(0x1 << 3)
+#define P2C_RG_TERMSEL		(0x1 << 2)
+#define P2C_DTM0_PART_MASK \
+		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
+#define P2C_RG_UART_EN		(0x1 << 16)
+#define P2C_RG_VBUSVALID	(0x1 << 5)
+#define P2C_RG_SESSEND		(0x1 << 4)
+#define P2C_RG_AVALID		(0x1 << 2)
+
+#define U3P_U3_PHYA_REG0	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
+#define P3A_RG_U3_VUSB10_ON	(1 << 5)
+
+#define U3P_U3_PHYA_REG6	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
+#define P3A_RG_TX_EIDLE_CM	(0xf << 28)
+#define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
+
+#define U3P_U3_PHYA_REG9	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
+#define P3A_RG_RX_DAC_MUX	(0x1f << 1)
+#define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
+
+#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
+#define P3A_RG_XTAL_EXT_EN_U3	(0x3 << 10)
+#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
+
+#define U3P_PHYD_CDR1	(SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
+#define P3D_RG_CDR_BIR_LTD1		(0x1f << 24)
+#define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
+#define P3D_RG_CDR_BIR_LTD0		(0x1f << 8)
+#define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
+
+#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x18)
+#define XC3_RG_U3_XTAL_RX_PWD		(0x1 << 9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD	(0x1 << 8)
+
+#define MT65XX_MAX_PHYS	2
+
+struct mt65xx_phy_instance {
+	struct phy *phy;
+	u32 index;
+	u32 delta; /* increament refers to port0 */
+};
+
+struct mt65xx_u3phy {
+	struct device *dev;
+	void __iomem *sif_base;	/* include sif2 */
+	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
+	struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
+};
+
+static struct mt65xx_u3phy *to_usbdrd_phy(
+	struct mt65xx_phy_instance *instance)
+{
+	return container_of((instance), struct mt65xx_u3phy,
+			    phys[(instance)->index]);
+}
+
+static void phy_instance_init(struct mt65xx_phy_instance *instance)
+{
+	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
+	void __iomem *sif_base = u3phy->sif_base + instance->delta;
+	u32 index = instance->index;
+	u32 tmp;
+
+	/* switch to USB function. (system register, force ip into usb mode) */
+	tmp = readl(sif_base + U3P_U2PHYDTM0);
+	tmp &= ~P2C_FORCE_UART_EN;
+	writel(tmp, sif_base + U3P_U2PHYDTM0);
+
+	tmp = readl(sif_base + U3P_U2PHYDTM1);
+	tmp &= ~P2C_RG_UART_EN;
+	writel(tmp, sif_base + U3P_U2PHYDTM1);
+
+	if (!index) {
+		tmp = readl(sif_base + U3P_U2PHYACR4);
+		tmp &= ~P2C_U2_GPIO_CTR_MSK;
+		writel(tmp, sif_base + U3P_U2PHYACR4);
+	}
+
+	/* DP/DM BC1.1 path Disable */
+	tmp = readl(sif_base + U3P_USBPHYACR6);
+	tmp &= ~PA6_RG_U2_BC11_SW_EN;
+	writel(tmp, sif_base + U3P_USBPHYACR6);
+
+	tmp = readl(sif_base + U3P_U3PHYA_DA_REG0);
+	tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
+	tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
+	writel(tmp, sif_base + U3P_U3PHYA_DA_REG0);
+
+	tmp = readl(sif_base + U3P_U3_PHYA_REG9);
+	tmp &= ~P3A_RG_RX_DAC_MUX;
+	tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
+	writel(tmp, sif_base + U3P_U3_PHYA_REG9);
+
+	tmp = readl(sif_base + U3P_U3_PHYA_REG6);
+	tmp &= ~P3A_RG_TX_EIDLE_CM;
+	tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
+	writel(tmp, sif_base + U3P_U3_PHYA_REG6);
+
+	tmp = readl(sif_base + U3P_PHYD_CDR1);
+	tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
+	tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
+	writel(tmp, sif_base + U3P_PHYD_CDR1);
+
+	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void phy_instance_power_on(struct mt65xx_phy_instance *instance)
+{
+	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
+	void __iomem *sif_base = u3phy->sif_base + instance->delta;
+	u32 index = instance->index;
+	u32 tmp;
+
+	if (!index) {
+		/* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
+		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
+		tmp |= P3A_RG_U3_VUSB10_ON;
+		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
+	}
+
+	/* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
+	tmp = readl(sif_base + U3P_U2PHYDTM0);
+	tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
+	tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+	writel(tmp, sif_base + U3P_U2PHYDTM0);
+
+	/* OTG Enable */
+	tmp = readl(sif_base + U3P_USBPHYACR6);
+	tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
+	writel(tmp, sif_base + U3P_USBPHYACR6);
+
+	if (!index) {
+		tmp = readl(sif_base + U3P_XTALCTL3);
+		tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
+		writel(tmp, sif_base + U3P_XTALCTL3);
+		/* [mt8173]disable Change 100uA current from SSUSB */
+		tmp = readl(sif_base + U3P_USBPHYACR5);
+		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+		writel(tmp, sif_base + U3P_USBPHYACR5);
+	}
+	udelay(800);
+
+	tmp = readl(sif_base + U3P_U2PHYDTM1);
+	tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
+	tmp &= ~P2C_RG_SESSEND;
+	writel(tmp, sif_base + U3P_U2PHYDTM1);
+	/* USB 2.0 slew rate calibration */
+	tmp = readl(sif_base + U3P_USBPHYACR5);
+	tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+	tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
+	writel(tmp, sif_base + U3P_USBPHYACR5);
+
+	dev_dbg(u3phy->dev, "%s(%d)(delta: 0x%x)\n", __func__,
+		index, u3phy->phys[index].delta);
+}
+
+static void phy_instance_power_off(struct mt65xx_phy_instance *instance)
+{
+	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
+	void __iomem *sif_base = u3phy->sif_base + instance->delta;
+	u32 index = instance->index;
+	u32 tmp;
+
+	tmp = readl(sif_base + U3P_U2PHYDTM0);
+	tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
+	tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
+	tmp |= P2C_FORCE_SUSPENDM;
+	writel(tmp, sif_base + U3P_U2PHYDTM0);
+
+	/* OTG Disable */
+	tmp = readl(sif_base + U3P_USBPHYACR6);
+	tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
+	writel(tmp, sif_base + U3P_USBPHYACR6);
+	if (!index) {
+		/* (also disable)Change 100uA current switch to USB2.0 */
+		tmp = readl(sif_base + U3P_USBPHYACR5);
+		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+		writel(tmp, sif_base + U3P_USBPHYACR5);
+	}
+	udelay(800);
+
+	/* let suspendm=0, set utmi into analog power down */
+	tmp = readl(sif_base + U3P_U2PHYDTM0);
+	tmp &= ~P2C_RG_SUSPENDM;
+	writel(tmp, sif_base + U3P_U2PHYDTM0);
+	udelay(1);
+
+	tmp = readl(sif_base + U3P_U2PHYDTM1);
+	tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
+	tmp |= P2C_RG_SESSEND;
+	writel(tmp, sif_base + U3P_U2PHYDTM1);
+
+	if (!index) {
+		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
+		tmp &= ~P3A_RG_U3_VUSB10_ON;
+		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
+	}
+
+	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+}
+
+static int u3phy_clk_enable(struct mt65xx_u3phy *u3phy)
+{
+	int ret;
+
+	ret = clk_prepare_enable(u3phy->u3phya_ref);
+	if (ret) {
+		dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
+		return ret;
+	}
+	udelay(100);
+
+	return 0;
+}
+
+static int mt65xx_phy_init(struct phy *phy)
+{
+	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
+
+	phy_instance_init(instance);
+	return 0;
+}
+
+static int mt65xx_phy_power_on(struct phy *phy)
+{
+	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
+
+	phy_instance_power_on(instance);
+	msleep(20);
+	return 0;
+}
+
+static int mt65xx_phy_power_off(struct phy *phy)
+{
+	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
+
+	phy_instance_power_off(instance);
+	return 0;
+}
+
+static struct phy *mt65xx_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	return u3phy->phys[args->args[0]].phy;
+}
+
+static struct phy_ops mt65xx_u3phy_ops = {
+	.init		= mt65xx_phy_init,
+	.power_on	= mt65xx_phy_power_on,
+	.power_off	= mt65xx_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id mt65xx_u3phy_id_table[] = {
+	{ .compatible = "mediatek,mt8173-u3phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+
+
+static int mt65xx_u3phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct resource *sif_res;
+	struct mt65xx_u3phy *u3phy;
+	int i;
+
+	u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
+	if (!u3phy)
+		return -ENOMEM;
+
+	u3phy->dev = dev;
+	platform_set_drvdata(pdev, u3phy);
+
+	sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
+	if (IS_ERR(u3phy->sif_base)) {
+		dev_err(dev, "failed to remap sif regs\n");
+		return PTR_ERR(u3phy->sif_base);
+	}
+
+	u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
+	if (IS_ERR(u3phy->u3phya_ref)) {
+		dev_err(dev, "error to get u3phya_ref\n");
+		return PTR_ERR(u3phy->u3phya_ref);
+	}
+
+	for (i = 0; i < MT65XX_MAX_PHYS; i++) {
+		struct mt65xx_phy_instance *instance;
+		struct phy *phy;
+
+		phy = devm_phy_create(dev, NULL, &mt65xx_u3phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create mt65xx_u3phy phy\n");
+			return PTR_ERR(phy);
+		}
+		instance = &u3phy->phys[i];
+		instance->phy = phy;
+		instance->index = i;
+		instance->delta = U3P_PHY_DELTA(i);
+		phy_set_drvdata(phy, instance);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register phy provider\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return u3phy_clk_enable(u3phy);
+}
+
+static int mt65xx_u3phy_remove(struct platform_device *pdev)
+{
+	struct mt65xx_u3phy *u3phy = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(u3phy->u3phya_ref);
+
+	return 0;
+}
+
+static struct platform_driver mt65xx_u3phy_driver = {
+	.probe		= mt65xx_u3phy_probe,
+	.remove		= mt65xx_u3phy_remove,
+	.driver		= {
+		.name	= "mt65xx-u3phy",
+		.of_match_table = mt65xx_u3phy_id_table,
+	},
+};
+
+module_platform_driver(mt65xx_u3phy_driver);
+
+MODULE_DESCRIPTION("Mt65xx USB PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1190004 — Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

[Multipart message — attachments visible in raw view] — view raw

Hi,

On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
> support usb3.0 phy of mt65xx SoCs
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

you missed Kishon here.

> ---
>  drivers/phy/Kconfig           |   9 +
>  drivers/phy/Makefile          |   1 +
>  drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 436 insertions(+)
>  create mode 100644 drivers/phy/phy-mt65xx-usb3.c
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index c0e6ede..019cf8b 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
>  	help
>  	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
>  
> +config PHY_MT65XX_USB3
> +	tristate "Mediatek USB3.0 PHY Driver"
> +	depends on ARCH_MEDIATEK && OF
> +	select GENERIC_PHY
> +	help
> +	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> +	  for mt65xx SoCs. it supports two usb2.0 ports and
> +	  one usb3.0 port.
> +
>  config PHY_SUN4I_USB
>  	tristate "Allwinner sunxi SoC USB PHY driver"
>  	depends on ARCH_SUNXI && HAS_IOMEM && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f344e1b..3ceff2a 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
>  obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
>  obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
>  obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
>  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
>  obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
>  obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> new file mode 100644
> index 0000000..5da4534
> --- /dev/null
> +++ b/drivers/phy/phy-mt65xx-usb3.c
> @@ -0,0 +1,426 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/resource.h>
> +
> +/*
> + * for sifslv2 register
> + * relative to USB3_SIF2_BASE base address
> + */
> +#define SSUSB_SIFSLV_SPLLC	(0x0000)
> +#define SSUSB_SIFSLV_U2PHY_COM_BASE	(0x0800)
> +#define SSUSB_SIFSLV_U3PHYD_BASE	(0x0900)
> +#define SSUSB_USB30_PHYA_SIV_B_BASE	(0x0b00)
> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE	(0x0c00)
> +
> +/*port1 refs. +0x800(refer to port0)*/
> +#define U3P_PORT_INTERVAL (0x800)	/*based on port0 */
> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
> +
> +#define U3P_USBPHYACR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
> +#define PA0_RG_U2PLL_FORCE_ON	(0x1 << 15)
> +
> +#define U3P_USBPHYACR2	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
> +#define PA2_RG_SIF_U2PLL_FORCE_EN	(0x1 << 18)
> +
> +#define U3P_USBPHYACR5	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
> +#define PA5_RG_U2_HSTX_SRCTRL		(0x7 << 12)
> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
> +#define PA5_RG_U2_HS_100U_U3_EN		(0x1 << 11)
> +
> +#define U3P_USBPHYACR6	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
> +#define PA6_RG_U2_ISO_EN		(0x1 << 31)
> +#define PA6_RG_U2_BC11_SW_EN	(0x1 << 23)
> +#define PA6_RG_U2_OTG_VBUSCMP_EN	(0x1 << 20)
> +
> +#define U3P_U2PHYACR4	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
> +#define P2C_RG_USB20_GPIO_CTL	(0x1 << 9)
> +#define P2C_USB20_GPIO_MODE	(0x1 << 8)
> +#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> +
> +#define U3D_U2PHYDCR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
> +#define P2C_RG_SIF_U2PLL_FORCE_ON	(0x1 << 24)
> +
> +#define U3P_U2PHYDTM0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
> +#define P2C_FORCE_UART_EN	(0x1 << 26)
> +#define P2C_FORCE_DATAIN	(0x1 << 23)
> +#define P2C_FORCE_DM_PULLDOWN	(0x1 << 21)
> +#define P2C_FORCE_DP_PULLDOWN	(0x1 << 20)
> +#define P2C_FORCE_XCVRSEL	(0x1 << 19)
> +#define P2C_FORCE_SUSPENDM	(0x1 << 18)
> +#define P2C_FORCE_TERMSEL	(0x1 << 17)
> +#define P2C_RG_DATAIN		(0xf << 10)
> +#define P2C_RG_DATAIN_VAL(x)	((0xf & (x)) << 10)
> +#define P2C_RG_DMPULLDOWN	(0x1 << 7)
> +#define P2C_RG_DPPULLDOWN	(0x1 << 6)
> +#define P2C_RG_XCVRSEL		(0x3 << 4)
> +#define P2C_RG_XCVRSEL_VAL(x)	((0x3 & (x)) << 4)
> +#define P2C_RG_SUSPENDM		(0x1 << 3)
> +#define P2C_RG_TERMSEL		(0x1 << 2)
> +#define P2C_DTM0_PART_MASK \
> +		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
> +		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
> +		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
> +		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
> +
> +#define U3P_U2PHYDTM1	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
> +#define P2C_RG_UART_EN		(0x1 << 16)
> +#define P2C_RG_VBUSVALID	(0x1 << 5)
> +#define P2C_RG_SESSEND		(0x1 << 4)
> +#define P2C_RG_AVALID		(0x1 << 2)
> +
> +#define U3P_U3_PHYA_REG0	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
> +#define P3A_RG_U3_VUSB10_ON	(1 << 5)
> +
> +#define U3P_U3_PHYA_REG6	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
> +#define P3A_RG_TX_EIDLE_CM	(0xf << 28)
> +#define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
> +
> +#define U3P_U3_PHYA_REG9	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
> +#define P3A_RG_RX_DAC_MUX	(0x1f << 1)
> +#define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
> +
> +#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
> +#define P3A_RG_XTAL_EXT_EN_U3	(0x3 << 10)
> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
> +
> +#define U3P_PHYD_CDR1	(SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
> +#define P3D_RG_CDR_BIR_LTD1		(0x1f << 24)
> +#define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
> +#define P3D_RG_CDR_BIR_LTD0		(0x1f << 8)
> +#define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
> +
> +#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x18)
> +#define XC3_RG_U3_XTAL_RX_PWD		(0x1 << 9)
> +#define XC3_RG_U3_FRC_XTAL_RX_PWD	(0x1 << 8)
> +
> +#define MT65XX_MAX_PHYS	2
> +
> +struct mt65xx_phy_instance {
> +	struct phy *phy;
> +	u32 index;
> +	u32 delta; /* increament refers to port0 */
> +};
> +
> +struct mt65xx_u3phy {
> +	struct device *dev;
> +	void __iomem *sif_base;	/* include sif2 */
> +	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
> +	struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
> +};
> +
> +static struct mt65xx_u3phy *to_usbdrd_phy(
> +	struct mt65xx_phy_instance *instance)
> +{
> +	return container_of((instance), struct mt65xx_u3phy,
> +			    phys[(instance)->index]);
> +}
> +
> +static void phy_instance_init(struct mt65xx_phy_instance *instance)
> +{
> +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +	u32 index = instance->index;
> +	u32 tmp;
> +
> +	/* switch to USB function. (system register, force ip into usb mode) */
> +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> +	tmp &= ~P2C_FORCE_UART_EN;
> +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> +	tmp &= ~P2C_RG_UART_EN;
> +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> +
> +	if (!index) {
> +		tmp = readl(sif_base + U3P_U2PHYACR4);
> +		tmp &= ~P2C_U2_GPIO_CTR_MSK;
> +		writel(tmp, sif_base + U3P_U2PHYACR4);
> +	}
> +
> +	/* DP/DM BC1.1 path Disable */
> +	tmp = readl(sif_base + U3P_USBPHYACR6);
> +	tmp &= ~PA6_RG_U2_BC11_SW_EN;
> +	writel(tmp, sif_base + U3P_USBPHYACR6);
> +
> +	tmp = readl(sif_base + U3P_U3PHYA_DA_REG0);
> +	tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
> +	tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
> +	writel(tmp, sif_base + U3P_U3PHYA_DA_REG0);
> +
> +	tmp = readl(sif_base + U3P_U3_PHYA_REG9);
> +	tmp &= ~P3A_RG_RX_DAC_MUX;
> +	tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
> +	writel(tmp, sif_base + U3P_U3_PHYA_REG9);
> +
> +	tmp = readl(sif_base + U3P_U3_PHYA_REG6);
> +	tmp &= ~P3A_RG_TX_EIDLE_CM;
> +	tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
> +	writel(tmp, sif_base + U3P_U3_PHYA_REG6);
> +
> +	tmp = readl(sif_base + U3P_PHYD_CDR1);
> +	tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
> +	tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
> +	writel(tmp, sif_base + U3P_PHYD_CDR1);
> +
> +	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> +}
> +
> +static void phy_instance_power_on(struct mt65xx_phy_instance *instance)
> +{
> +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +	u32 index = instance->index;
> +	u32 tmp;
> +
> +	if (!index) {
> +		/* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
> +		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> +		tmp |= P3A_RG_U3_VUSB10_ON;
> +		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> +	}
> +
> +	/* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
> +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> +	tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
> +	tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
> +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +	/* OTG Enable */
> +	tmp = readl(sif_base + U3P_USBPHYACR6);
> +	tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
> +	writel(tmp, sif_base + U3P_USBPHYACR6);
> +
> +	if (!index) {
> +		tmp = readl(sif_base + U3P_XTALCTL3);
> +		tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
> +		writel(tmp, sif_base + U3P_XTALCTL3);
> +		/* [mt8173]disable Change 100uA current from SSUSB */
> +		tmp = readl(sif_base + U3P_USBPHYACR5);
> +		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> +		writel(tmp, sif_base + U3P_USBPHYACR5);
> +	}
> +	udelay(800);
> +
> +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> +	tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
> +	tmp &= ~P2C_RG_SESSEND;
> +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> +	/* USB 2.0 slew rate calibration */
> +	tmp = readl(sif_base + U3P_USBPHYACR5);
> +	tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
> +	tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
> +	writel(tmp, sif_base + U3P_USBPHYACR5);
> +
> +	dev_dbg(u3phy->dev, "%s(%d)(delta: 0x%x)\n", __func__,
> +		index, u3phy->phys[index].delta);
> +}
> +
> +static void phy_instance_power_off(struct mt65xx_phy_instance *instance)
> +{
> +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +	u32 index = instance->index;
> +	u32 tmp;
> +
> +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> +	tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
> +	tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
> +	tmp |= P2C_FORCE_SUSPENDM;
> +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +	/* OTG Disable */
> +	tmp = readl(sif_base + U3P_USBPHYACR6);
> +	tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
> +	writel(tmp, sif_base + U3P_USBPHYACR6);
> +	if (!index) {
> +		/* (also disable)Change 100uA current switch to USB2.0 */
> +		tmp = readl(sif_base + U3P_USBPHYACR5);
> +		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> +		writel(tmp, sif_base + U3P_USBPHYACR5);
> +	}
> +	udelay(800);
> +
> +	/* let suspendm=0, set utmi into analog power down */
> +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> +	tmp &= ~P2C_RG_SUSPENDM;
> +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> +	udelay(1);
> +
> +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> +	tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
> +	tmp |= P2C_RG_SESSEND;
> +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> +
> +	if (!index) {
> +		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> +		tmp &= ~P3A_RG_U3_VUSB10_ON;
> +		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> +	}
> +
> +	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> +}
> +
> +static int u3phy_clk_enable(struct mt65xx_u3phy *u3phy)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(u3phy->u3phya_ref);
> +	if (ret) {
> +		dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
> +		return ret;
> +	}
> +	udelay(100);
> +
> +	return 0;
> +}
> +
> +static int mt65xx_phy_init(struct phy *phy)
> +{
> +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +	phy_instance_init(instance);
> +	return 0;
> +}
> +
> +static int mt65xx_phy_power_on(struct phy *phy)
> +{
> +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +	phy_instance_power_on(instance);
> +	msleep(20);
> +	return 0;
> +}
> +
> +static int mt65xx_phy_power_off(struct phy *phy)
> +{
> +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +	phy_instance_power_off(instance);
> +	return 0;
> +}
> +
> +static struct phy *mt65xx_phy_xlate(struct device *dev,
> +					struct of_phandle_args *args)
> +{
> +	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> +
> +	if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
> +		return ERR_PTR(-ENODEV);
> +
> +	return u3phy->phys[args->args[0]].phy;
> +}
> +
> +static struct phy_ops mt65xx_u3phy_ops = {
> +	.init		= mt65xx_phy_init,
> +	.power_on	= mt65xx_phy_power_on,
> +	.power_off	= mt65xx_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static const struct of_device_id mt65xx_u3phy_id_table[] = {
> +	{ .compatible = "mediatek,mt8173-u3phy",},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
> +
> +
> +static int mt65xx_u3phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *phy_provider;
> +	struct resource *sif_res;
> +	struct mt65xx_u3phy *u3phy;
> +	int i;
> +
> +	u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
> +	if (!u3phy)
> +		return -ENOMEM;
> +
> +	u3phy->dev = dev;
> +	platform_set_drvdata(pdev, u3phy);
> +
> +	sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
> +	if (IS_ERR(u3phy->sif_base)) {
> +		dev_err(dev, "failed to remap sif regs\n");
> +		return PTR_ERR(u3phy->sif_base);
> +	}
> +
> +	u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> +	if (IS_ERR(u3phy->u3phya_ref)) {
> +		dev_err(dev, "error to get u3phya_ref\n");
> +		return PTR_ERR(u3phy->u3phya_ref);
> +	}
> +
> +	for (i = 0; i < MT65XX_MAX_PHYS; i++) {
> +		struct mt65xx_phy_instance *instance;
> +		struct phy *phy;
> +
> +		phy = devm_phy_create(dev, NULL, &mt65xx_u3phy_ops);
> +		if (IS_ERR(phy)) {
> +			dev_err(dev, "failed to create mt65xx_u3phy phy\n");
> +			return PTR_ERR(phy);
> +		}
> +		instance = &u3phy->phys[i];
> +		instance->phy = phy;
> +		instance->index = i;
> +		instance->delta = U3P_PHY_DELTA(i);
> +		phy_set_drvdata(phy, instance);
> +	}
> +
> +	phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
> +	if (IS_ERR(phy_provider)) {
> +		dev_err(dev, "Failed to register phy provider\n");
> +		return PTR_ERR(phy_provider);
> +	}
> +
> +	return u3phy_clk_enable(u3phy);
> +}
> +
> +static int mt65xx_u3phy_remove(struct platform_device *pdev)
> +{
> +	struct mt65xx_u3phy *u3phy = platform_get_drvdata(pdev);
> +
> +	clk_disable_unprepare(u3phy->u3phya_ref);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver mt65xx_u3phy_driver = {
> +	.probe		= mt65xx_u3phy_probe,
> +	.remove		= mt65xx_u3phy_remove,
> +	.driver		= {
> +		.name	= "mt65xx-u3phy",
> +		.of_match_table = mt65xx_u3phy_id_table,
> +	},
> +};
> +
> +module_platform_driver(mt65xx_u3phy_driver);
> +
> +MODULE_DESCRIPTION("Mt65xx USB PHY driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.8.1.1.dirty
> 

-- 
balbi

[toc] | [prev] | [next] | [standalone]

#1192464 — Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

hi,
On Wed, 2015-07-22 at 09:21 -0500, Felipe Balbi wrote:
> Hi,
> 
> On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
> > support usb3.0 phy of mt65xx SoCs
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> 
> you missed Kishon here.
> 
Thank you.
> > ---
> >  drivers/phy/Kconfig           |   9 +
> >  drivers/phy/Makefile          |   1 +
> >  drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 436 insertions(+)
> >  create mode 100644 drivers/phy/phy-mt65xx-usb3.c
> > 
> > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> > index c0e6ede..019cf8b 100644
> > --- a/drivers/phy/Kconfig
> > +++ b/drivers/phy/Kconfig
> > @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
> >  	help
> >  	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
> >  
> > +config PHY_MT65XX_USB3
> > +	tristate "Mediatek USB3.0 PHY Driver"
> > +	depends on ARCH_MEDIATEK && OF
> > +	select GENERIC_PHY
> > +	help
> > +	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> > +	  for mt65xx SoCs. it supports two usb2.0 ports and
> > +	  one usb3.0 port.
> > +
> >  config PHY_SUN4I_USB
> >  	tristate "Allwinner sunxi SoC USB PHY driver"
> >  	depends on ARCH_SUNXI && HAS_IOMEM && OF
> > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> > index f344e1b..3ceff2a 100644
> > --- a/drivers/phy/Makefile
> > +++ b/drivers/phy/Makefile
> > @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
> >  obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
> >  obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
> >  obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
> > +obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
> >  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
> >  obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
> >  obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
> > diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> > new file mode 100644
> > index 0000000..5da4534
> > --- /dev/null
> > +++ b/drivers/phy/phy-mt65xx-usb3.c
> > @@ -0,0 +1,426 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
> > + *
> > + * This software is licensed under the terms of the GNU General Public
> > + * License version 2, as published by the Free Software Foundation, and
> > + * may be copied, distributed, and modified under those terms.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/of.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/resource.h>
> > +
> > +/*
> > + * for sifslv2 register
> > + * relative to USB3_SIF2_BASE base address
> > + */
> > +#define SSUSB_SIFSLV_SPLLC	(0x0000)
> > +#define SSUSB_SIFSLV_U2PHY_COM_BASE	(0x0800)
> > +#define SSUSB_SIFSLV_U3PHYD_BASE	(0x0900)
> > +#define SSUSB_USB30_PHYA_SIV_B_BASE	(0x0b00)
> > +#define SSUSB_SIFSLV_U3PHYA_DA_BASE	(0x0c00)
> > +
> > +/*port1 refs. +0x800(refer to port0)*/
> > +#define U3P_PORT_INTERVAL (0x800)	/*based on port0 */
> > +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
> > +
> > +#define U3P_USBPHYACR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
> > +#define PA0_RG_U2PLL_FORCE_ON	(0x1 << 15)
> > +
> > +#define U3P_USBPHYACR2	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
> > +#define PA2_RG_SIF_U2PLL_FORCE_EN	(0x1 << 18)
> > +
> > +#define U3P_USBPHYACR5	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
> > +#define PA5_RG_U2_HSTX_SRCTRL		(0x7 << 12)
> > +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
> > +#define PA5_RG_U2_HS_100U_U3_EN		(0x1 << 11)
> > +
> > +#define U3P_USBPHYACR6	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
> > +#define PA6_RG_U2_ISO_EN		(0x1 << 31)
> > +#define PA6_RG_U2_BC11_SW_EN	(0x1 << 23)
> > +#define PA6_RG_U2_OTG_VBUSCMP_EN	(0x1 << 20)
> > +
> > +#define U3P_U2PHYACR4	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
> > +#define P2C_RG_USB20_GPIO_CTL	(0x1 << 9)
> > +#define P2C_USB20_GPIO_MODE	(0x1 << 8)
> > +#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> > +
> > +#define U3D_U2PHYDCR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
> > +#define P2C_RG_SIF_U2PLL_FORCE_ON	(0x1 << 24)
> > +
> > +#define U3P_U2PHYDTM0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
> > +#define P2C_FORCE_UART_EN	(0x1 << 26)
> > +#define P2C_FORCE_DATAIN	(0x1 << 23)
> > +#define P2C_FORCE_DM_PULLDOWN	(0x1 << 21)
> > +#define P2C_FORCE_DP_PULLDOWN	(0x1 << 20)
> > +#define P2C_FORCE_XCVRSEL	(0x1 << 19)
> > +#define P2C_FORCE_SUSPENDM	(0x1 << 18)
> > +#define P2C_FORCE_TERMSEL	(0x1 << 17)
> > +#define P2C_RG_DATAIN		(0xf << 10)
> > +#define P2C_RG_DATAIN_VAL(x)	((0xf & (x)) << 10)
> > +#define P2C_RG_DMPULLDOWN	(0x1 << 7)
> > +#define P2C_RG_DPPULLDOWN	(0x1 << 6)
> > +#define P2C_RG_XCVRSEL		(0x3 << 4)
> > +#define P2C_RG_XCVRSEL_VAL(x)	((0x3 & (x)) << 4)
> > +#define P2C_RG_SUSPENDM		(0x1 << 3)
> > +#define P2C_RG_TERMSEL		(0x1 << 2)
> > +#define P2C_DTM0_PART_MASK \
> > +		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
> > +		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
> > +		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
> > +		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
> > +
> > +#define U3P_U2PHYDTM1	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
> > +#define P2C_RG_UART_EN		(0x1 << 16)
> > +#define P2C_RG_VBUSVALID	(0x1 << 5)
> > +#define P2C_RG_SESSEND		(0x1 << 4)
> > +#define P2C_RG_AVALID		(0x1 << 2)
> > +
> > +#define U3P_U3_PHYA_REG0	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
> > +#define P3A_RG_U3_VUSB10_ON	(1 << 5)
> > +
> > +#define U3P_U3_PHYA_REG6	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
> > +#define P3A_RG_TX_EIDLE_CM	(0xf << 28)
> > +#define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
> > +
> > +#define U3P_U3_PHYA_REG9	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
> > +#define P3A_RG_RX_DAC_MUX	(0x1f << 1)
> > +#define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
> > +
> > +#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
> > +#define P3A_RG_XTAL_EXT_EN_U3	(0x3 << 10)
> > +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
> > +
> > +#define U3P_PHYD_CDR1	(SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
> > +#define P3D_RG_CDR_BIR_LTD1		(0x1f << 24)
> > +#define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
> > +#define P3D_RG_CDR_BIR_LTD0		(0x1f << 8)
> > +#define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
> > +
> > +#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x18)
> > +#define XC3_RG_U3_XTAL_RX_PWD		(0x1 << 9)
> > +#define XC3_RG_U3_FRC_XTAL_RX_PWD	(0x1 << 8)
> > +
> > +#define MT65XX_MAX_PHYS	2
> > +
> > +struct mt65xx_phy_instance {
> > +	struct phy *phy;
> > +	u32 index;
> > +	u32 delta; /* increament refers to port0 */
> > +};
> > +
> > +struct mt65xx_u3phy {
> > +	struct device *dev;
> > +	void __iomem *sif_base;	/* include sif2 */
> > +	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
> > +	struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
> > +};
> > +
> > +static struct mt65xx_u3phy *to_usbdrd_phy(
> > +	struct mt65xx_phy_instance *instance)
> > +{
> > +	return container_of((instance), struct mt65xx_u3phy,
> > +			    phys[(instance)->index]);
> > +}
> > +
> > +static void phy_instance_init(struct mt65xx_phy_instance *instance)
> > +{
> > +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> > +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> > +	u32 index = instance->index;
> > +	u32 tmp;
> > +
> > +	/* switch to USB function. (system register, force ip into usb mode) */
> > +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> > +	tmp &= ~P2C_FORCE_UART_EN;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> > +
> > +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> > +	tmp &= ~P2C_RG_UART_EN;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> > +
> > +	if (!index) {
> > +		tmp = readl(sif_base + U3P_U2PHYACR4);
> > +		tmp &= ~P2C_U2_GPIO_CTR_MSK;
> > +		writel(tmp, sif_base + U3P_U2PHYACR4);
> > +	}
> > +
> > +	/* DP/DM BC1.1 path Disable */
> > +	tmp = readl(sif_base + U3P_USBPHYACR6);
> > +	tmp &= ~PA6_RG_U2_BC11_SW_EN;
> > +	writel(tmp, sif_base + U3P_USBPHYACR6);
> > +
> > +	tmp = readl(sif_base + U3P_U3PHYA_DA_REG0);
> > +	tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
> > +	tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
> > +	writel(tmp, sif_base + U3P_U3PHYA_DA_REG0);
> > +
> > +	tmp = readl(sif_base + U3P_U3_PHYA_REG9);
> > +	tmp &= ~P3A_RG_RX_DAC_MUX;
> > +	tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
> > +	writel(tmp, sif_base + U3P_U3_PHYA_REG9);
> > +
> > +	tmp = readl(sif_base + U3P_U3_PHYA_REG6);
> > +	tmp &= ~P3A_RG_TX_EIDLE_CM;
> > +	tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
> > +	writel(tmp, sif_base + U3P_U3_PHYA_REG6);
> > +
> > +	tmp = readl(sif_base + U3P_PHYD_CDR1);
> > +	tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
> > +	tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
> > +	writel(tmp, sif_base + U3P_PHYD_CDR1);
> > +
> > +	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> > +}
> > +
> > +static void phy_instance_power_on(struct mt65xx_phy_instance *instance)
> > +{
> > +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> > +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> > +	u32 index = instance->index;
> > +	u32 tmp;
> > +
> > +	if (!index) {
> > +		/* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
> > +		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> > +		tmp |= P3A_RG_U3_VUSB10_ON;
> > +		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> > +	}
> > +
> > +	/* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
> > +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> > +	tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
> > +	tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
> > +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> > +
> > +	/* OTG Enable */
> > +	tmp = readl(sif_base + U3P_USBPHYACR6);
> > +	tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
> > +	writel(tmp, sif_base + U3P_USBPHYACR6);
> > +
> > +	if (!index) {
> > +		tmp = readl(sif_base + U3P_XTALCTL3);
> > +		tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
> > +		writel(tmp, sif_base + U3P_XTALCTL3);
> > +		/* [mt8173]disable Change 100uA current from SSUSB */
> > +		tmp = readl(sif_base + U3P_USBPHYACR5);
> > +		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> > +		writel(tmp, sif_base + U3P_USBPHYACR5);
> > +	}
> > +	udelay(800);
> > +
> > +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> > +	tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
> > +	tmp &= ~P2C_RG_SESSEND;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> > +	/* USB 2.0 slew rate calibration */
> > +	tmp = readl(sif_base + U3P_USBPHYACR5);
> > +	tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
> > +	tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
> > +	writel(tmp, sif_base + U3P_USBPHYACR5);
> > +
> > +	dev_dbg(u3phy->dev, "%s(%d)(delta: 0x%x)\n", __func__,
> > +		index, u3phy->phys[index].delta);
> > +}
> > +
> > +static void phy_instance_power_off(struct mt65xx_phy_instance *instance)
> > +{
> > +	struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> > +	void __iomem *sif_base = u3phy->sif_base + instance->delta;
> > +	u32 index = instance->index;
> > +	u32 tmp;
> > +
> > +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> > +	tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
> > +	tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
> > +	tmp |= P2C_FORCE_SUSPENDM;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> > +
> > +	/* OTG Disable */
> > +	tmp = readl(sif_base + U3P_USBPHYACR6);
> > +	tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
> > +	writel(tmp, sif_base + U3P_USBPHYACR6);
> > +	if (!index) {
> > +		/* (also disable)Change 100uA current switch to USB2.0 */
> > +		tmp = readl(sif_base + U3P_USBPHYACR5);
> > +		tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> > +		writel(tmp, sif_base + U3P_USBPHYACR5);
> > +	}
> > +	udelay(800);
> > +
> > +	/* let suspendm=0, set utmi into analog power down */
> > +	tmp = readl(sif_base + U3P_U2PHYDTM0);
> > +	tmp &= ~P2C_RG_SUSPENDM;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM0);
> > +	udelay(1);
> > +
> > +	tmp = readl(sif_base + U3P_U2PHYDTM1);
> > +	tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
> > +	tmp |= P2C_RG_SESSEND;
> > +	writel(tmp, sif_base + U3P_U2PHYDTM1);
> > +
> > +	if (!index) {
> > +		tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> > +		tmp &= ~P3A_RG_U3_VUSB10_ON;
> > +		writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> > +	}
> > +
> > +	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> > +}
> > +
> > +static int u3phy_clk_enable(struct mt65xx_u3phy *u3phy)
> > +{
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(u3phy->u3phya_ref);
> > +	if (ret) {
> > +		dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
> > +		return ret;
> > +	}
> > +	udelay(100);
> > +
> > +	return 0;
> > +}
> > +
> > +static int mt65xx_phy_init(struct phy *phy)
> > +{
> > +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> > +
> > +	phy_instance_init(instance);
> > +	return 0;
> > +}
> > +
> > +static int mt65xx_phy_power_on(struct phy *phy)
> > +{
> > +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> > +
> > +	phy_instance_power_on(instance);
> > +	msleep(20);
> > +	return 0;
> > +}
> > +
> > +static int mt65xx_phy_power_off(struct phy *phy)
> > +{
> > +	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> > +
> > +	phy_instance_power_off(instance);
> > +	return 0;
> > +}
> > +
> > +static struct phy *mt65xx_phy_xlate(struct device *dev,
> > +					struct of_phandle_args *args)
> > +{
> > +	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> > +
> > +	if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
> > +		return ERR_PTR(-ENODEV);
> > +
> > +	return u3phy->phys[args->args[0]].phy;
> > +}
> > +
> > +static struct phy_ops mt65xx_u3phy_ops = {
> > +	.init		= mt65xx_phy_init,
> > +	.power_on	= mt65xx_phy_power_on,
> > +	.power_off	= mt65xx_phy_power_off,
> > +	.owner		= THIS_MODULE,
> > +};
> > +
> > +static const struct of_device_id mt65xx_u3phy_id_table[] = {
> > +	{ .compatible = "mediatek,mt8173-u3phy",},
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
> > +
> > +
> > +static int mt65xx_u3phy_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct phy_provider *phy_provider;
> > +	struct resource *sif_res;
> > +	struct mt65xx_u3phy *u3phy;
> > +	int i;
> > +
> > +	u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
> > +	if (!u3phy)
> > +		return -ENOMEM;
> > +
> > +	u3phy->dev = dev;
> > +	platform_set_drvdata(pdev, u3phy);
> > +
> > +	sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
> > +	if (IS_ERR(u3phy->sif_base)) {
> > +		dev_err(dev, "failed to remap sif regs\n");
> > +		return PTR_ERR(u3phy->sif_base);
> > +	}
> > +
> > +	u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> > +	if (IS_ERR(u3phy->u3phya_ref)) {
> > +		dev_err(dev, "error to get u3phya_ref\n");
> > +		return PTR_ERR(u3phy->u3phya_ref);
> > +	}
> > +
> > +	for (i = 0; i < MT65XX_MAX_PHYS; i++) {
> > +		struct mt65xx_phy_instance *instance;
> > +		struct phy *phy;
> > +
> > +		phy = devm_phy_create(dev, NULL, &mt65xx_u3phy_ops);
> > +		if (IS_ERR(phy)) {
> > +			dev_err(dev, "failed to create mt65xx_u3phy phy\n");
> > +			return PTR_ERR(phy);
> > +		}
> > +		instance = &u3phy->phys[i];
> > +		instance->phy = phy;
> > +		instance->index = i;
> > +		instance->delta = U3P_PHY_DELTA(i);
> > +		phy_set_drvdata(phy, instance);
> > +	}
> > +
> > +	phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
> > +	if (IS_ERR(phy_provider)) {
> > +		dev_err(dev, "Failed to register phy provider\n");
> > +		return PTR_ERR(phy_provider);
> > +	}
> > +
> > +	return u3phy_clk_enable(u3phy);
> > +}
> > +
> > +static int mt65xx_u3phy_remove(struct platform_device *pdev)
> > +{
> > +	struct mt65xx_u3phy *u3phy = platform_get_drvdata(pdev);
> > +
> > +	clk_disable_unprepare(u3phy->u3phya_ref);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct platform_driver mt65xx_u3phy_driver = {
> > +	.probe		= mt65xx_u3phy_probe,
> > +	.remove		= mt65xx_u3phy_remove,
> > +	.driver		= {
> > +		.name	= "mt65xx-u3phy",
> > +		.of_match_table = mt65xx_u3phy_id_table,
> > +	},
> > +};
> > +
> > +module_platform_driver(mt65xx_u3phy_driver);
> > +
> > +MODULE_DESCRIPTION("Mt65xx USB PHY driver");
> > +MODULE_LICENSE("GPL v2");
> > -- 
> > 1.8.1.1.dirty
> > 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193790 — Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

Hi,

On Sunday 26 July 2015 08:21 AM, chunfeng yun wrote:
> hi,
> On Wed, 2015-07-22 at 09:21 -0500, Felipe Balbi wrote:
>> Hi,
>>
>> On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
>>> support usb3.0 phy of mt65xx SoCs
>>>
>>> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
>>
>> you missed Kishon here.
>>
> Thank you.
>>> ---
>>>  drivers/phy/Kconfig           |   9 +
>>>  drivers/phy/Makefile          |   1 +
>>>  drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 436 insertions(+)
>>>  create mode 100644 drivers/phy/phy-mt65xx-usb3.c
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index c0e6ede..019cf8b 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
>>>  	help
>>>  	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
>>>  
>>> +config PHY_MT65XX_USB3
>>> +	tristate "Mediatek USB3.0 PHY Driver"
>>> +	depends on ARCH_MEDIATEK && OF
>>> +	select GENERIC_PHY
>>> +	help
>>> +	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
>>> +	  for mt65xx SoCs. it supports two usb2.0 ports and
>>> +	  one usb3.0 port.
>>> +
>>>  config PHY_SUN4I_USB
>>>  	tristate "Allwinner sunxi SoC USB PHY driver"
>>>  	depends on ARCH_SUNXI && HAS_IOMEM && OF
>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>>> index f344e1b..3ceff2a 100644
>>> --- a/drivers/phy/Makefile
>>> +++ b/drivers/phy/Makefile
>>> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
>>>  obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
>>>  obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
>>>  obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
>>> +obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
>>>  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
>>>  obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
>>>  obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
>>> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
>>> new file mode 100644
>>> index 0000000..5da4534
>>> --- /dev/null
>>> +++ b/drivers/phy/phy-mt65xx-usb3.c
>>> @@ -0,0 +1,426 @@
>>> +/*
>>> + * Copyright (c) 2015 MediaTek Inc.
>>> + * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
>>> + *
>>> + * This software is licensed under the terms of the GNU General Public
>>> + * License version 2, as published by the Free Software Foundation, and
>>> + * may be copied, distributed, and modified under those terms.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/of.h>
>>> +#include <linux/phy/phy.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/regulator/consumer.h>

Lot of these #include are not required. Add only those what are required by
this driver.
>>> +#include <linux/resource.h>
>>> +
>>> +/*
>>> + * for sifslv2 register
>>> + * relative to USB3_SIF2_BASE base address
>>> + */
>>> +#define SSUSB_SIFSLV_SPLLC	(0x0000)
>>> +#define SSUSB_SIFSLV_U2PHY_COM_BASE	(0x0800)

Looks like all this base address can come from dt.
>>> +#define SSUSB_SIFSLV_U3PHYD_BASE	(0x0900)
>>> +#define SSUSB_USB30_PHYA_SIV_B_BASE	(0x0b00)
>>> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE	(0x0c00)
>>> +
>>> +/*port1 refs. +0x800(refer to port0)*/
>>> +#define U3P_PORT_INTERVAL (0x800)	/*based on port0 */
>>> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
>>> +
>>> +#define U3P_USBPHYACR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
>>> +#define PA0_RG_U2PLL_FORCE_ON	(0x1 << 15)
>>> +
>>> +#define U3P_USBPHYACR2	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
>>> +#define PA2_RG_SIF_U2PLL_FORCE_EN	(0x1 << 18)
>>> +
>>> +#define U3P_USBPHYACR5	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
>>> +#define PA5_RG_U2_HSTX_SRCTRL		(0x7 << 12)
>>> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
>>> +#define PA5_RG_U2_HS_100U_U3_EN		(0x1 << 11)
>>> +
>>> +#define U3P_USBPHYACR6	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
>>> +#define PA6_RG_U2_ISO_EN		(0x1 << 31)
>>> +#define PA6_RG_U2_BC11_SW_EN	(0x1 << 23)
>>> +#define PA6_RG_U2_OTG_VBUSCMP_EN	(0x1 << 20)
>>> +
>>> +#define U3P_U2PHYACR4	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
>>> +#define P2C_RG_USB20_GPIO_CTL	(0x1 << 9)
>>> +#define P2C_USB20_GPIO_MODE	(0x1 << 8)
>>> +#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
>>> +
>>> +#define U3D_U2PHYDCR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
>>> +#define P2C_RG_SIF_U2PLL_FORCE_ON	(0x1 << 24)
>>> +
>>> +#define U3P_U2PHYDTM0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
>>> +#define P2C_FORCE_UART_EN	(0x1 << 26)
>>> +#define P2C_FORCE_DATAIN	(0x1 << 23)
>>> +#define P2C_FORCE_DM_PULLDOWN	(0x1 << 21)
>>> +#define P2C_FORCE_DP_PULLDOWN	(0x1 << 20)
>>> +#define P2C_FORCE_XCVRSEL	(0x1 << 19)
>>> +#define P2C_FORCE_SUSPENDM	(0x1 << 18)
>>> +#define P2C_FORCE_TERMSEL	(0x1 << 17)
>>> +#define P2C_RG_DATAIN		(0xf << 10)
>>> +#define P2C_RG_DATAIN_VAL(x)	((0xf & (x)) << 10)
>>> +#define P2C_RG_DMPULLDOWN	(0x1 << 7)
>>> +#define P2C_RG_DPPULLDOWN	(0x1 << 6)
>>> +#define P2C_RG_XCVRSEL		(0x3 << 4)
>>> +#define P2C_RG_XCVRSEL_VAL(x)	((0x3 & (x)) << 4)
>>> +#define P2C_RG_SUSPENDM		(0x1 << 3)
>>> +#define P2C_RG_TERMSEL		(0x1 << 2)
>>> +#define P2C_DTM0_PART_MASK \
>>> +		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
>>> +		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
>>> +		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
>>> +		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
>>> +
>>> +#define U3P_U2PHYDTM1	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
>>> +#define P2C_RG_UART_EN		(0x1 << 16)
>>> +#define P2C_RG_VBUSVALID	(0x1 << 5)
>>> +#define P2C_RG_SESSEND		(0x1 << 4)
>>> +#define P2C_RG_AVALID		(0x1 << 2)
>>> +
>>> +#define U3P_U3_PHYA_REG0	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
>>> +#define P3A_RG_U3_VUSB10_ON	(1 << 5)
>>> +
>>> +#define U3P_U3_PHYA_REG6	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
>>> +#define P3A_RG_TX_EIDLE_CM	(0xf << 28)
>>> +#define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
>>> +
>>> +#define U3P_U3_PHYA_REG9	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
>>> +#define P3A_RG_RX_DAC_MUX	(0x1f << 1)
>>> +#define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
>>> +
>>> +#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
>>> +#define P3A_RG_XTAL_EXT_EN_U3	(0x3 << 10)
>>> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
>>> +
>>> +#define U3P_PHYD_CDR1	(SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
>>> +#define P3D_RG_CDR_BIR_LTD1		(0x1f << 24)
>>> +#define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
>>> +#define P3D_RG_CDR_BIR_LTD0		(0x1f << 8)
>>> +#define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
>>> +
>>> +#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x18)
>>> +#define XC3_RG_U3_XTAL_RX_PWD		(0x1 << 9)
>>> +#define XC3_RG_U3_FRC_XTAL_RX_PWD	(0x1 << 8)
>>> +
>>> +#define MT65XX_MAX_PHYS	2
>>> +
>>> +struct mt65xx_phy_instance {
>>> +	struct phy *phy;
>>> +	u32 index;
>>> +	u32 delta; /* increament refers to port0 */
>>> +};
>>> +
>>> +struct mt65xx_u3phy {
>>> +	struct device *dev;
>>> +	void __iomem *sif_base;	/* include sif2 */
>>> +	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
>>> +	struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
>>> +};
>>> +
>>> +static struct mt65xx_u3phy *to_usbdrd_phy(
>>> +	struct mt65xx_phy_instance *instance)
>>> +{
>>> +	return container_of((instance), struct mt65xx_u3phy,
>>> +			    phys[(instance)->index]);
>>> +}
>>> +
.
.
<<snip>>
.
.

>>> +static struct phy *mt65xx_phy_xlate(struct device *dev,
>>> +					struct of_phandle_args *args)
>>> +{
>>> +	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
>>> +
>>> +	if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
>>> +		return ERR_PTR(-ENODEV);
>>> +
>>> +	return u3phy->phys[args->args[0]].phy;
>>> +}

If the driver doesn't have to get any data from dt, then custom xlate is not
required at all. All you have to do is create separate nodes for every
individual phy and keep it as the child node of the phy_provider dt node. Note
that the phy consumer dt node should now use the label given for the chld-nodes
and not the phy_provider. Look at drivers/phy/phy-miphy365x.c for reference.

Cheers
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1197920 — Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

On Fri, 2015-07-31 at 19:48 +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Friday 31 July 2015 05:55 PM, chunfeng yun wrote:
> > hi,
> > On Tue, 2015-07-28 at 11:17 +0530, Kishon Vijay Abraham I wrote:
> >> Hi,
> >>
> >> On Sunday 26 July 2015 08:21 AM, chunfeng yun wrote:
> >>> hi,
> >>> On Wed, 2015-07-22 at 09:21 -0500, Felipe Balbi wrote:
> >>>> Hi,
> >>>>
> >>>> On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
> >>>>> support usb3.0 phy of mt65xx SoCs
> >>>>>
> >>>>> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> >>>>
> >>>> you missed Kishon here.
> >>>>
> >>> Thank you.
> >>>>> ---
> >>>>>  drivers/phy/Kconfig           |   9 +
> >>>>>  drivers/phy/Makefile          |   1 +
> >>>>>  drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
> >>>>>  3 files changed, 436 insertions(+)
> >>>>>  create mode 100644 drivers/phy/phy-mt65xx-usb3.c
> >>>>>
> >>>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> >>>>> index c0e6ede..019cf8b 100644
> >>>>> --- a/drivers/phy/Kconfig
> >>>>> +++ b/drivers/phy/Kconfig
> >>>>> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
> >>>>>  	help
> >>>>>  	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
> >>>>>  
> >>>>> +config PHY_MT65XX_USB3
> >>>>> +	tristate "Mediatek USB3.0 PHY Driver"
> >>>>> +	depends on ARCH_MEDIATEK && OF
> >>>>> +	select GENERIC_PHY
> >>>>> +	help
> >>>>> +	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> >>>>> +	  for mt65xx SoCs. it supports two usb2.0 ports and
> >>>>> +	  one usb3.0 port.
> >>>>> +
> >>>>>  config PHY_SUN4I_USB
> >>>>>  	tristate "Allwinner sunxi SoC USB PHY driver"
> >>>>>  	depends on ARCH_SUNXI && HAS_IOMEM && OF
> >>>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> >>>>> index f344e1b..3ceff2a 100644
> >>>>> --- a/drivers/phy/Makefile
> >>>>> +++ b/drivers/phy/Makefile
> >>>>> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
> >>>>>  obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
> >>>>>  obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
> >>>>>  obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
> >>>>> +obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
> >>>>>  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
> >>>>>  obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
> >>>>>  obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
> >>>>> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> >>>>> new file mode 100644
> >>>>> index 0000000..5da4534
> >>>>> --- /dev/null
> >>>>> +++ b/drivers/phy/phy-mt65xx-usb3.c
> >>>>> @@ -0,0 +1,426 @@
> >>>>> +/*
> >>>>> + * Copyright (c) 2015 MediaTek Inc.
> >>>>> + * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
> >>>>> + *
> >>>>> + * This software is licensed under the terms of the GNU General Public
> >>>>> + * License version 2, as published by the Free Software Foundation, and
> >>>>> + * may be copied, distributed, and modified under those terms.
> >>>>> + *
> >>>>> + * This program is distributed in the hope that it will be useful,
> >>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >>>>> + * GNU General Public License for more details.
> >>>>> + *
> >>>>> + */
> >>>>> +
> >>>>> +#include <linux/clk.h>
> >>>>> +#include <linux/delay.h>
> >>>>> +#include <linux/io.h>
> >>>>> +#include <linux/module.h>
> >>>>> +#include <linux/of_address.h>
> >>>>> +#include <linux/of_device.h>
> >>>>> +#include <linux/of_gpio.h>
> >>>>> +#include <linux/of.h>
> >>>>> +#include <linux/phy/phy.h>
> >>>>> +#include <linux/platform_device.h>
> >>>>> +#include <linux/pm_runtime.h>
> >>>>> +#include <linux/regulator/consumer.h>
> >>
> >> Lot of these #include are not required. Add only those what are required by
> >> this driver.
> > The dummy header files will be removed later
> > 
> >>>>> +#include <linux/resource.h>
> >>>>> +
> >>>>> +/*
> >>>>> + * for sifslv2 register
> >>>>> + * relative to USB3_SIF2_BASE base address
> >>>>> + */
> >>>>> +#define SSUSB_SIFSLV_SPLLC	(0x0000)
> >>>>> +#define SSUSB_SIFSLV_U2PHY_COM_BASE	(0x0800)
> >>
> >> Looks like all this base address can come from dt.
> > The phy supports multi-ports, and these are sub-segment registers for
> > port0, and other ports can be calculated from the bases. So I think it's
> > better to use the same base address in dts
> 
> Nope. Except for the register offsets everything else can come from dt.
> > 
> >>>>> +#define SSUSB_SIFSLV_U3PHYD_BASE	(0x0900)
> >>>>> +#define SSUSB_USB30_PHYA_SIV_B_BASE	(0x0b00)
> >>>>> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE	(0x0c00)
> >>>>> +
> >>>>> +/*port1 refs. +0x800(refer to port0)*/
> >>>>> +#define U3P_PORT_INTERVAL (0x800)	/*based on port0 */
> >>>>> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
> >>>>> +
> >>>>> +#define U3P_USBPHYACR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
> >>>>> +#define PA0_RG_U2PLL_FORCE_ON	(0x1 << 15)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR2	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
> >>>>> +#define PA2_RG_SIF_U2PLL_FORCE_EN	(0x1 << 18)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR5	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
> >>>>> +#define PA5_RG_U2_HSTX_SRCTRL		(0x7 << 12)
> >>>>> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)	((0x7 & (x)) << 12)
> >>>>> +#define PA5_RG_U2_HS_100U_U3_EN		(0x1 << 11)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR6	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
> >>>>> +#define PA6_RG_U2_ISO_EN		(0x1 << 31)
> >>>>> +#define PA6_RG_U2_BC11_SW_EN	(0x1 << 23)
> >>>>> +#define PA6_RG_U2_OTG_VBUSCMP_EN	(0x1 << 20)
> >>>>> +
> >>>>> +#define U3P_U2PHYACR4	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
> >>>>> +#define P2C_RG_USB20_GPIO_CTL	(0x1 << 9)
> >>>>> +#define P2C_USB20_GPIO_MODE	(0x1 << 8)
> >>>>> +#define P2C_U2_GPIO_CTR_MSK	(P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> >>>>> +
> >>>>> +#define U3D_U2PHYDCR0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
> >>>>> +#define P2C_RG_SIF_U2PLL_FORCE_ON	(0x1 << 24)
> >>>>> +
> >>>>> +#define U3P_U2PHYDTM0	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
> >>>>> +#define P2C_FORCE_UART_EN	(0x1 << 26)
> >>>>> +#define P2C_FORCE_DATAIN	(0x1 << 23)
> >>>>> +#define P2C_FORCE_DM_PULLDOWN	(0x1 << 21)
> >>>>> +#define P2C_FORCE_DP_PULLDOWN	(0x1 << 20)
> >>>>> +#define P2C_FORCE_XCVRSEL	(0x1 << 19)
> >>>>> +#define P2C_FORCE_SUSPENDM	(0x1 << 18)
> >>>>> +#define P2C_FORCE_TERMSEL	(0x1 << 17)
> >>>>> +#define P2C_RG_DATAIN		(0xf << 10)
> >>>>> +#define P2C_RG_DATAIN_VAL(x)	((0xf & (x)) << 10)
> >>>>> +#define P2C_RG_DMPULLDOWN	(0x1 << 7)
> >>>>> +#define P2C_RG_DPPULLDOWN	(0x1 << 6)
> >>>>> +#define P2C_RG_XCVRSEL		(0x3 << 4)
> >>>>> +#define P2C_RG_XCVRSEL_VAL(x)	((0x3 & (x)) << 4)
> >>>>> +#define P2C_RG_SUSPENDM		(0x1 << 3)
> >>>>> +#define P2C_RG_TERMSEL		(0x1 << 2)
> >>>>> +#define P2C_DTM0_PART_MASK \
> >>>>> +		(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
> >>>>> +		P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
> >>>>> +		P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
> >>>>> +		P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
> >>>>> +
> >>>>> +#define U3P_U2PHYDTM1	(SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
> >>>>> +#define P2C_RG_UART_EN		(0x1 << 16)
> >>>>> +#define P2C_RG_VBUSVALID	(0x1 << 5)
> >>>>> +#define P2C_RG_SESSEND		(0x1 << 4)
> >>>>> +#define P2C_RG_AVALID		(0x1 << 2)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG0	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
> >>>>> +#define P3A_RG_U3_VUSB10_ON	(1 << 5)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG6	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
> >>>>> +#define P3A_RG_TX_EIDLE_CM	(0xf << 28)
> >>>>> +#define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG9	(SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
> >>>>> +#define P3A_RG_RX_DAC_MUX	(0x1f << 1)
> >>>>> +#define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
> >>>>> +
> >>>>> +#define U3P_U3PHYA_DA_REG0	(SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
> >>>>> +#define P3A_RG_XTAL_EXT_EN_U3	(0x3 << 10)
> >>>>> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
> >>>>> +
> >>>>> +#define U3P_PHYD_CDR1	(SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
> >>>>> +#define P3D_RG_CDR_BIR_LTD1		(0x1f << 24)
> >>>>> +#define P3D_RG_CDR_BIR_LTD1_VAL(x)	((0x1f & (x)) << 24)
> >>>>> +#define P3D_RG_CDR_BIR_LTD0		(0x1f << 8)
> >>>>> +#define P3D_RG_CDR_BIR_LTD0_VAL(x)	((0x1f & (x)) << 8)
> >>>>> +
> >>>>> +#define U3P_XTALCTL3		(SSUSB_SIFSLV_SPLLC + 0x18)
> >>>>> +#define XC3_RG_U3_XTAL_RX_PWD		(0x1 << 9)
> >>>>> +#define XC3_RG_U3_FRC_XTAL_RX_PWD	(0x1 << 8)
> >>>>> +
> >>>>> +#define MT65XX_MAX_PHYS	2
> >>>>> +
> >>>>> +struct mt65xx_phy_instance {
> >>>>> +	struct phy *phy;
> >>>>> +	u32 index;
> >>>>> +	u32 delta; /* increament refers to port0 */
> >>>>> +};
> >>>>> +
> >>>>> +struct mt65xx_u3phy {
> >>>>> +	struct device *dev;
> >>>>> +	void __iomem *sif_base;	/* include sif2 */
> >>>>> +	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
> >>>>> +	struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
> >>>>> +};
> >>>>> +
> >>>>> +static struct mt65xx_u3phy *to_usbdrd_phy(
> >>>>> +	struct mt65xx_phy_instance *instance)
> >>>>> +{
> >>>>> +	return container_of((instance), struct mt65xx_u3phy,
> >>>>> +			    phys[(instance)->index]);
> >>>>> +}
> >>>>> +
> >> .
> >> .
> >> <<snip>>
> >> .
> >> .
> >>
> >>>>> +static struct phy *mt65xx_phy_xlate(struct device *dev,
> >>>>> +					struct of_phandle_args *args)
> >>>>> +{
> >>>>> +	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> >>>>> +
> >>>>> +	if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
> >>>>> +		return ERR_PTR(-ENODEV);
> >>>>> +
> >>>>> +	return u3phy->phys[args->args[0]].phy;
> >>>>> +}
> >>
> >> If the driver doesn't have to get any data from dt, then custom xlate is not
> >> required at all. All you have to do is create separate nodes for every
> >> individual phy and keep it as the child node of the phy_provider dt node. Note
> >> that the phy consumer dt node should now use the label given for the chld-nodes
> >> and not the phy_provider. Look at drivers/phy/phy-miphy365x.c for reference.
> >>
> > It is multi-port PHY, and these ports share some registers from offset
> > [0, 0x7ff], and port0 segment is [0x800, 0xfff], port1 segment is
> 
> The shared registers can be added in the 'phy_provider' dt node and the port
> specific registers can be added in the sub-node of phy_provider.
> > [0x1000, 0x17ff], etc, so I think maybe it is not suitable to create
> > separate nodes in dts for each port.
> 
> Sorry, don't agree with you here.
> > BTW: I refer to phy-exynos5-usbdrd.c which is multi-channel usb3.0 phy
> > to write this driver.
> 
> Bad driver to refer to. It was added when phy-core was just merged to the linux
> kernel. And later new features had been added to the phy-core just to better
> support multi-phy phy-providers. If it is not for maintaining old dtbs
> compatibility, that driver would have been changed as well.
> 
I know a little about it now, and re-write the driver later.
Thanks a lot for your kindly explanation and guidance:-)

> Thanks
> Kishon


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1193132 — Re: [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs

Hi Chungfeng,

Comments inline.

On Wed, Jul 22, 2015 at 10:05 PM, Chunfeng Yun
<chunfeng.yun@mediatek.com> wrote:
> support usb3.0 phy of mt65xx SoCs
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>  drivers/phy/Kconfig           |   9 +
>  drivers/phy/Makefile          |   1 +
>  drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 436 insertions(+)
>  create mode 100644 drivers/phy/phy-mt65xx-usb3.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index c0e6ede..019cf8b 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
>         help
>           Support for SATA PHY on Hisilicon hix5hd2 Soc.
>
> +config PHY_MT65XX_USB3
> +       tristate "Mediatek USB3.0 PHY Driver"
> +       depends on ARCH_MEDIATEK && OF
> +       select GENERIC_PHY
> +       help
> +         Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> +         for mt65xx SoCs. it supports two usb2.0 ports and
> +         one usb3.0 port.
> +
>  config PHY_SUN4I_USB
>         tristate "Allwinner sunxi SoC USB PHY driver"
>         depends on ARCH_SUNXI && HAS_IOMEM && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f344e1b..3ceff2a 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3)                        += phy-ti-pipe3.o
>  obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o
>  obj-$(CONFIG_PHY_EXYNOS5250_SATA)      += phy-exynos5250-sata.o
>  obj-$(CONFIG_PHY_HIX5HD2_SATA)         += phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_MT65XX_USB3)          += phy-mt65xx-usb3.o
>  obj-$(CONFIG_PHY_SUN4I_USB)            += phy-sun4i-usb.o
>  obj-$(CONFIG_PHY_SUN9I_USB)            += phy-sun9i-usb.o
>  obj-$(CONFIG_PHY_SAMSUNG_USB2)         += phy-exynos-usb2.o
> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> new file mode 100644
> index 0000000..5da4534
> --- /dev/null
> +++ b/drivers/phy/phy-mt65xx-usb3.c
> @@ -0,0 +1,426 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/resource.h>
> +
> +/*
> + * for sifslv2 register
> + * relative to USB3_SIF2_BASE base address
> + */
> +#define SSUSB_SIFSLV_SPLLC     (0x0000)
> +#define SSUSB_SIFSLV_U2PHY_COM_BASE    (0x0800)
> +#define SSUSB_SIFSLV_U3PHYD_BASE       (0x0900)
> +#define SSUSB_USB30_PHYA_SIV_B_BASE    (0x0b00)
> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE    (0x0c00)

You don't need () here. Same for all following numeric constants.

> +
> +/*port1 refs. +0x800(refer to port0)*/
> +#define U3P_PORT_INTERVAL (0x800)      /*based on port0 */
> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))

Indent with tab. It might also be a good idea to align the
indentations of all the macros.

> +
> +#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
> +#define PA0_RG_U2PLL_FORCE_ON  (0x1 << 15)

Use BIT() instead? Same for all following (0x1 << xx) macros.

> +
> +#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
> +#define PA2_RG_SIF_U2PLL_FORCE_EN      (0x1 << 18)
> +
> +#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
> +#define PA5_RG_U2_HSTX_SRCTRL          (0x7 << 12)
> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x)   ((0x7 & (x)) << 12)
> +#define PA5_RG_U2_HS_100U_U3_EN                (0x1 << 11)
> +
> +#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
> +#define PA6_RG_U2_ISO_EN               (0x1 << 31)
> +#define PA6_RG_U2_BC11_SW_EN   (0x1 << 23)
> +#define PA6_RG_U2_OTG_VBUSCMP_EN       (0x1 << 20)
> +
> +#define U3P_U2PHYACR4  (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
> +#define P2C_RG_USB20_GPIO_CTL  (0x1 << 9)
> +#define P2C_USB20_GPIO_MODE    (0x1 << 8)
> +#define P2C_U2_GPIO_CTR_MSK    (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> +
> +#define U3D_U2PHYDCR0  (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
> +#define P2C_RG_SIF_U2PLL_FORCE_ON      (0x1 << 24)
> +
> +#define U3P_U2PHYDTM0  (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
> +#define P2C_FORCE_UART_EN      (0x1 << 26)
> +#define P2C_FORCE_DATAIN       (0x1 << 23)
> +#define P2C_FORCE_DM_PULLDOWN  (0x1 << 21)
> +#define P2C_FORCE_DP_PULLDOWN  (0x1 << 20)
> +#define P2C_FORCE_XCVRSEL      (0x1 << 19)
> +#define P2C_FORCE_SUSPENDM     (0x1 << 18)
> +#define P2C_FORCE_TERMSEL      (0x1 << 17)
> +#define P2C_RG_DATAIN          (0xf << 10)
> +#define P2C_RG_DATAIN_VAL(x)   ((0xf & (x)) << 10)
> +#define P2C_RG_DMPULLDOWN      (0x1 << 7)
> +#define P2C_RG_DPPULLDOWN      (0x1 << 6)
> +#define P2C_RG_XCVRSEL         (0x3 << 4)
> +#define P2C_RG_XCVRSEL_VAL(x)  ((0x3 & (x)) << 4)
> +#define P2C_RG_SUSPENDM                (0x1 << 3)
> +#define P2C_RG_TERMSEL         (0x1 << 2)
> +#define P2C_DTM0_PART_MASK \
> +               (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
> +               P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
> +               P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
> +               P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
> +
> +#define U3P_U2PHYDTM1  (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
> +#define P2C_RG_UART_EN         (0x1 << 16)
> +#define P2C_RG_VBUSVALID       (0x1 << 5)
> +#define P2C_RG_SESSEND         (0x1 << 4)
> +#define P2C_RG_AVALID          (0x1 << 2)
> +
> +#define U3P_U3_PHYA_REG0       (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
> +#define P3A_RG_U3_VUSB10_ON    (1 << 5)
> +
> +#define U3P_U3_PHYA_REG6       (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
> +#define P3A_RG_TX_EIDLE_CM     (0xf << 28)
> +#define P3A_RG_TX_EIDLE_CM_VAL(x)      ((0xf & (x)) << 28)
> +
> +#define U3P_U3_PHYA_REG9       (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
> +#define P3A_RG_RX_DAC_MUX      (0x1f << 1)
> +#define P3A_RG_RX_DAC_MUX_VAL(x)       ((0x1f & (x)) << 1)
> +
> +#define U3P_U3PHYA_DA_REG0     (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
> +#define P3A_RG_XTAL_EXT_EN_U3  (0x3 << 10)
> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x)   ((0x3 & (x)) << 10)
> +
> +#define U3P_PHYD_CDR1  (SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
> +#define P3D_RG_CDR_BIR_LTD1            (0x1f << 24)
> +#define P3D_RG_CDR_BIR_LTD1_VAL(x)     ((0x1f & (x)) << 24)
> +#define P3D_RG_CDR_BIR_LTD0            (0x1f << 8)
> +#define P3D_RG_CDR_BIR_LTD0_VAL(x)     ((0x1f & (x)) << 8)
> +
> +#define U3P_XTALCTL3           (SSUSB_SIFSLV_SPLLC + 0x18)
> +#define XC3_RG_U3_XTAL_RX_PWD          (0x1 << 9)
> +#define XC3_RG_U3_FRC_XTAL_RX_PWD      (0x1 << 8)
> +
> +#define MT65XX_MAX_PHYS        2
> +
> +struct mt65xx_phy_instance {
> +       struct phy *phy;
> +       u32 index;
> +       u32 delta; /* increament refers to port0 */
> +};
> +
> +struct mt65xx_u3phy {
> +       struct device *dev;
> +       void __iomem *sif_base; /* include sif2 */
> +       struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
> +       struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
> +};
> +
> +static struct mt65xx_u3phy *to_usbdrd_phy(
> +       struct mt65xx_phy_instance *instance)
> +{
> +       return container_of((instance), struct mt65xx_u3phy,
> +                           phys[(instance)->index]);
> +}
> +
> +static void phy_instance_init(struct mt65xx_phy_instance *instance)
> +{
> +       struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +       void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +       u32 index = instance->index;
> +       u32 tmp;
> +
> +       /* switch to USB function. (system register, force ip into usb mode) */
> +       tmp = readl(sif_base + U3P_U2PHYDTM0);
> +       tmp &= ~P2C_FORCE_UART_EN;
> +       writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +       tmp = readl(sif_base + U3P_U2PHYDTM1);
> +       tmp &= ~P2C_RG_UART_EN;
> +       writel(tmp, sif_base + U3P_U2PHYDTM1);
> +
> +       if (!index) {
> +               tmp = readl(sif_base + U3P_U2PHYACR4);
> +               tmp &= ~P2C_U2_GPIO_CTR_MSK;
> +               writel(tmp, sif_base + U3P_U2PHYACR4);
> +       }
> +
> +       /* DP/DM BC1.1 path Disable */
> +       tmp = readl(sif_base + U3P_USBPHYACR6);
> +       tmp &= ~PA6_RG_U2_BC11_SW_EN;
> +       writel(tmp, sif_base + U3P_USBPHYACR6);
> +
> +       tmp = readl(sif_base + U3P_U3PHYA_DA_REG0);
> +       tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
> +       tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
> +       writel(tmp, sif_base + U3P_U3PHYA_DA_REG0);
> +
> +       tmp = readl(sif_base + U3P_U3_PHYA_REG9);
> +       tmp &= ~P3A_RG_RX_DAC_MUX;
> +       tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
> +       writel(tmp, sif_base + U3P_U3_PHYA_REG9);
> +
> +       tmp = readl(sif_base + U3P_U3_PHYA_REG6);
> +       tmp &= ~P3A_RG_TX_EIDLE_CM;
> +       tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
> +       writel(tmp, sif_base + U3P_U3_PHYA_REG6);
> +
> +       tmp = readl(sif_base + U3P_PHYD_CDR1);
> +       tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
> +       tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
> +       writel(tmp, sif_base + U3P_PHYD_CDR1);
> +
> +       dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> +}
> +
> +static void phy_instance_power_on(struct mt65xx_phy_instance *instance)
> +{
> +       struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +       void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +       u32 index = instance->index;
> +       u32 tmp;
> +
> +       if (!index) {
> +               /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
> +               tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> +               tmp |= P3A_RG_U3_VUSB10_ON;
> +               writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> +       }
> +
> +       /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
> +       tmp = readl(sif_base + U3P_U2PHYDTM0);
> +       tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
> +       tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
> +       writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +       /* OTG Enable */
> +       tmp = readl(sif_base + U3P_USBPHYACR6);
> +       tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
> +       writel(tmp, sif_base + U3P_USBPHYACR6);
> +
> +       if (!index) {
> +               tmp = readl(sif_base + U3P_XTALCTL3);
> +               tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
> +               writel(tmp, sif_base + U3P_XTALCTL3);
> +               /* [mt8173]disable Change 100uA current from SSUSB */
> +               tmp = readl(sif_base + U3P_USBPHYACR5);
> +               tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> +               writel(tmp, sif_base + U3P_USBPHYACR5);
> +       }
> +       udelay(800);
> +
> +       tmp = readl(sif_base + U3P_U2PHYDTM1);
> +       tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
> +       tmp &= ~P2C_RG_SESSEND;
> +       writel(tmp, sif_base + U3P_U2PHYDTM1);
> +       /* USB 2.0 slew rate calibration */
> +       tmp = readl(sif_base + U3P_USBPHYACR5);
> +       tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
> +       tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
> +       writel(tmp, sif_base + U3P_USBPHYACR5);
> +
> +       dev_dbg(u3phy->dev, "%s(%d)(delta: 0x%x)\n", __func__,
> +               index, u3phy->phys[index].delta);
> +}
> +
> +static void phy_instance_power_off(struct mt65xx_phy_instance *instance)
> +{
> +       struct mt65xx_u3phy *u3phy = to_usbdrd_phy(instance);
> +       void __iomem *sif_base = u3phy->sif_base + instance->delta;
> +       u32 index = instance->index;
> +       u32 tmp;
> +
> +       tmp = readl(sif_base + U3P_U2PHYDTM0);
> +       tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
> +       tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
> +       tmp |= P2C_FORCE_SUSPENDM;
> +       writel(tmp, sif_base + U3P_U2PHYDTM0);
> +
> +       /* OTG Disable */
> +       tmp = readl(sif_base + U3P_USBPHYACR6);
> +       tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
> +       writel(tmp, sif_base + U3P_USBPHYACR6);
> +       if (!index) {
> +               /* (also disable)Change 100uA current switch to USB2.0 */
> +               tmp = readl(sif_base + U3P_USBPHYACR5);
> +               tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
> +               writel(tmp, sif_base + U3P_USBPHYACR5);
> +       }
> +       udelay(800);
> +
> +       /* let suspendm=0, set utmi into analog power down */
> +       tmp = readl(sif_base + U3P_U2PHYDTM0);
> +       tmp &= ~P2C_RG_SUSPENDM;
> +       writel(tmp, sif_base + U3P_U2PHYDTM0);
> +       udelay(1);
> +
> +       tmp = readl(sif_base + U3P_U2PHYDTM1);
> +       tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
> +       tmp |= P2C_RG_SESSEND;
> +       writel(tmp, sif_base + U3P_U2PHYDTM1);
> +
> +       if (!index) {
> +               tmp = readl(sif_base + U3P_U3_PHYA_REG0);
> +               tmp &= ~P3A_RG_U3_VUSB10_ON;
> +               writel(tmp, sif_base + U3P_U3_PHYA_REG0);
> +       }
> +
> +       dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> +}
> +
> +static int u3phy_clk_enable(struct mt65xx_u3phy *u3phy)
> +{
> +       int ret;
> +
> +       ret = clk_prepare_enable(u3phy->u3phya_ref);
> +       if (ret) {
> +               dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
> +               return ret;
> +       }
> +       udelay(100);
> +
> +       return 0;
> +}
> +
> +static int mt65xx_phy_init(struct phy *phy)
> +{
> +       struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +       phy_instance_init(instance);
> +       return 0;
> +}
> +
> +static int mt65xx_phy_power_on(struct phy *phy)
> +{
> +       struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +       phy_instance_power_on(instance);
> +       msleep(20);
> +       return 0;
> +}
> +
> +static int mt65xx_phy_power_off(struct phy *phy)
> +{
> +       struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
> +
> +       phy_instance_power_off(instance);
> +       return 0;
> +}
> +
> +static struct phy *mt65xx_phy_xlate(struct device *dev,
> +                                       struct of_phandle_args *args)
> +{
> +       struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> +
> +       if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
> +               return ERR_PTR(-ENODEV);
> +
> +       return u3phy->phys[args->args[0]].phy;
> +}
> +
> +static struct phy_ops mt65xx_u3phy_ops = {
> +       .init           = mt65xx_phy_init,
> +       .power_on       = mt65xx_phy_power_on,
> +       .power_off      = mt65xx_phy_power_off,
> +       .owner          = THIS_MODULE,
> +};
> +
> +static const struct of_device_id mt65xx_u3phy_id_table[] = {
> +       { .compatible = "mediatek,mt8173-u3phy",},
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
> +
> +
> +static int mt65xx_u3phy_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct phy_provider *phy_provider;
> +       struct resource *sif_res;
> +       struct mt65xx_u3phy *u3phy;
> +       int i;
> +
> +       u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
> +       if (!u3phy)
> +               return -ENOMEM;
> +
> +       u3phy->dev = dev;
> +       platform_set_drvdata(pdev, u3phy);
> +
> +       sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
> +       if (IS_ERR(u3phy->sif_base)) {
> +               dev_err(dev, "failed to remap sif regs\n");
> +               return PTR_ERR(u3phy->sif_base);
> +       }
> +
> +       u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> +       if (IS_ERR(u3phy->u3phya_ref)) {
> +               dev_err(dev, "error to get u3phya_ref\n");
> +               return PTR_ERR(u3phy->u3phya_ref);
> +       }
> +
> +       for (i = 0; i < MT65XX_MAX_PHYS; i++) {
> +               struct mt65xx_phy_instance *instance;
> +               struct phy *phy;
> +
> +               phy = devm_phy_create(dev, NULL, &mt65xx_u3phy_ops);
> +               if (IS_ERR(phy)) {
> +                       dev_err(dev, "failed to create mt65xx_u3phy phy\n");
> +                       return PTR_ERR(phy);
> +               }
> +               instance = &u3phy->phys[i];
> +               instance->phy = phy;
> +               instance->index = i;
> +               instance->delta = U3P_PHY_DELTA(i);
> +               phy_set_drvdata(phy, instance);
> +       }
> +
> +       phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
> +       if (IS_ERR(phy_provider)) {
> +               dev_err(dev, "Failed to register phy provider\n");
> +               return PTR_ERR(phy_provider);
> +       }
> +
> +       return u3phy_clk_enable(u3phy);
> +}
> +
> +static int mt65xx_u3phy_remove(struct platform_device *pdev)
> +{
> +       struct mt65xx_u3phy *u3phy = platform_get_drvdata(pdev);
> +
> +       clk_disable_unprepare(u3phy->u3phya_ref);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver mt65xx_u3phy_driver = {
> +       .probe          = mt65xx_u3phy_probe,
> +       .remove         = mt65xx_u3phy_remove,
> +       .driver         = {
> +               .name   = "mt65xx-u3phy",
> +               .of_match_table = mt65xx_u3phy_id_table,
> +       },
> +};
> +
> +module_platform_driver(mt65xx_u3phy_driver);
> +
> +MODULE_DESCRIPTION("Mt65xx USB PHY driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.8.1.1.dirty
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1189984 — [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs

add a DT binding documentation of usb3.0 phy for MT65xx
SoCs from Mediatek.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 .../devicetree/bindings/phy/phy-mt65xx-u3.txt       | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt
new file mode 100644
index 0000000..752abc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt
@@ -0,0 +1,21 @@
+MT65xx USB3.0 PHY
+
+The device node for Mediatek SOC usb3.0 phy
+
+Required properties:
+ - compatible : Should be "mediatek,mt8173-u3phy"
+ - reg        : Offset and length of registers for phy domain
+ - clocks     : must support all clocks that phy need
+ - clock-names: should be "u3phya_ref" for u3phya reference clock.
+ - #phy-cells : must be 1 for the phy
+
+Example:
+
+u3phy: usb-phy@11290000 {
+	compatible = "mediatek,mt8173-u3phy";
+	reg = <0 0x11290000 0 0x3000>;
+	clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+	clock-names = "u3phya_ref";
+	#phy-cells = <1>;
+	status = "okay";
+};
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1189985 — [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 .../devicetree/bindings/usb/mt8173-xhci.txt        | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt

diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..444494d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,50 @@
+MT65XX xhci
+
+The device node for Mediatek SOC usb3.0 host controller
+
+Required properties:
+ - compatible : supports "mediatek,mt8173-xhci"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt mode, number and trigger mode
+ - power-domains: to enable usb's mtcmos
+ - vusb33-supply:  regulator of usb avdd3.3v
+ - clocks     : must support all clocks that xhci needs
+ - clock-names: should be "sys_mac" for sys and mac clocks, and
+	"wakeup_deb_p0", "wakeup_deb_p1" for wakeup debounce control
+	clocks
+ - phys	: the phys that xhci will bind, currently supports up to two
+	phys, so phy index should not greater than one.
+ - phy-names : should be "phy-X" format, X equals to 0 or 1
+ - usb3-lpm-capable: supports USB3 LPM
+ - mediatek,usb-wakeup: to access usb wakeup control register
+ - mediatek,wakeup-src: 1: ip sleep wakeup mode; 2: line state wakeup
+	mode; others means don't enable wakeup source of usb
+ - mediatek,u2port-num: the number should not greater than the number
+	of phys
+
+Optional properties:
+ - vbus-supply : reference to the VBUS regulator;
+
+Example:
+usb: usb30@11270000 {
+	compatible = "mediatek,mt8173-xhci";
+	reg = <0 0x11270000 0 0x4000>,
+	      <0 0x11280000 0 0x0800>;
+	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	clocks = <&topckgen CLK_TOP_USB30_SEL>,
+		 <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB1>;
+	clock-names = "sys_mac",
+		      "wakeup_deb_p0",
+		      "wakeup_deb_p1";
+	phys = <&u3phy 0>, <&u3phy 1>;
+	phy-names = "phy-0", "phy-1";
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	usb3-lpm-capable;
+	mediatek,usb-wakeup = <&pericfg>;
+	mediatek,wakeup-src = <1>;
+	mediatek,u2port-num = <2>;
+	status = "okay";
+};
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1190012 — Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

On Wed, Jul 22, 2015 at 03:05:42PM +0100, Chunfeng Yun wrote:
> add a DT binding documentation of xHCI host controller for the
> MT8173 SoC from Mediatek.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>  .../devicetree/bindings/usb/mt8173-xhci.txt        | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> new file mode 100644
> index 0000000..444494d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> @@ -0,0 +1,50 @@
> +MT65XX xhci
> +
> +The device node for Mediatek SOC usb3.0 host controller
> +
> +Required properties:
> + - compatible : supports "mediatek,mt8173-xhci"
> + - reg        : Offset and length of registers

Your example has multiple reg entries.

Please list what each entry is, and the order you expect them in.

> + - interrupts : Interrupt mode, number and trigger mode
> + - power-domains: to enable usb's mtcmos
> + - vusb33-supply:  regulator of usb avdd3.3v
> + - clocks     : must support all clocks that xhci needs
> + - clock-names: should be "sys_mac" for sys and mac clocks, and
> +	"wakeup_deb_p0", "wakeup_deb_p1" for wakeup debounce control
> +	clocks
> + - phys	: the phys that xhci will bind, currently supports up to two
> +	phys, so phy index should not greater than one.
> + - phy-names : should be "phy-X" format, X equals to 0 or 1

This seems somewhat pointless.

> + - usb3-lpm-capable: supports USB3 LPM
> + - mediatek,usb-wakeup: to access usb wakeup control register

What exactly does this property imply?

> + - mediatek,wakeup-src: 1: ip sleep wakeup mode; 2: line state wakeup
> +	mode; others means don't enable wakeup source of usb

This sounds like configuration rather than a hardware property. Why do
you think this needs to be in the DT?

> + - mediatek,u2port-num: the number should not greater than the number
> +	of phys

What exactly does this property imply?

Mark.

> +
> +Optional properties:
> + - vbus-supply : reference to the VBUS regulator;
> +
> +Example:
> +usb: usb30@11270000 {
> +	compatible = "mediatek,mt8173-xhci";
> +	reg = <0 0x11270000 0 0x4000>,
> +	      <0 0x11280000 0 0x0800>;
> +	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> +	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> +	clocks = <&topckgen CLK_TOP_USB30_SEL>,
> +		 <&pericfg CLK_PERI_USB0>,
> +		 <&pericfg CLK_PERI_USB1>;
> +	clock-names = "sys_mac",
> +		      "wakeup_deb_p0",
> +		      "wakeup_deb_p1";
> +	phys = <&u3phy 0>, <&u3phy 1>;
> +	phy-names = "phy-0", "phy-1";
> +	vusb33-supply = <&mt6397_vusb_reg>;
> +	vbus-supply = <&usb_p1_vbus>;
> +	usb3-lpm-capable;
> +	mediatek,usb-wakeup = <&pericfg>;
> +	mediatek,wakeup-src = <1>;
> +	mediatek,u2port-num = <2>;
> +	status = "okay";
> +};
> -- 
> 1.8.1.1.dirty
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1192465 — Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

Hi,
On Wed, 2015-07-22 at 15:22 +0100, Mark Rutland wrote:
> On Wed, Jul 22, 2015 at 03:05:42PM +0100, Chunfeng Yun wrote:
> > add a DT binding documentation of xHCI host controller for the
> > MT8173 SoC from Mediatek.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >  .../devicetree/bindings/usb/mt8173-xhci.txt        | 50 ++++++++++++++++++++++
> >  1 file changed, 50 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> > new file mode 100644
> > index 0000000..444494d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> > @@ -0,0 +1,50 @@
> > +MT65XX xhci
> > +
> > +The device node for Mediatek SOC usb3.0 host controller
> > +
> > +Required properties:
> > + - compatible : supports "mediatek,mt8173-xhci"
> > + - reg        : Offset and length of registers
> 
> Your example has multiple reg entries.
> 
> Please list what each entry is, and the order you expect them in.
> 
Ok
> > + - interrupts : Interrupt mode, number and trigger mode
> > + - power-domains: to enable usb's mtcmos
> > + - vusb33-supply:  regulator of usb avdd3.3v
> > + - clocks     : must support all clocks that xhci needs
> > + - clock-names: should be "sys_mac" for sys and mac clocks, and
> > +	"wakeup_deb_p0", "wakeup_deb_p1" for wakeup debounce control
> > +	clocks
> > + - phys	: the phys that xhci will bind, currently supports up to two
> > +	phys, so phy index should not greater than one.
> > + - phy-names : should be "phy-X" format, X equals to 0 or 1
> 
> This seems somewhat pointless.
> 
I'll describe it more exactly.

> > + - usb3-lpm-capable: supports USB3 LPM
> > + - mediatek,usb-wakeup: to access usb wakeup control register
> 
> What exactly does this property imply?
> 
There are some control registers for usb wakeup which are put in another
module, here to get the node of that module, and then use regmap and
syscon to operate it.

> > + - mediatek,wakeup-src: 1: ip sleep wakeup mode; 2: line state wakeup
> > +	mode; others means don't enable wakeup source of usb
> 
> This sounds like configuration rather than a hardware property. Why do
> you think this needs to be in the DT?
> 
Yes, it's better to put it in the DT. 

> > + - mediatek,u2port-num: the number should not greater than the number
> > +	of phys
> 
> What exactly does this property imply?
> 
On some platform, it only makes use of partial usb ports, so disable
others to save power.

> Mark.
> 
> > +
> > +Optional properties:
> > + - vbus-supply : reference to the VBUS regulator;
> > +
> > +Example:
> > +usb: usb30@11270000 {
> > +	compatible = "mediatek,mt8173-xhci";
> > +	reg = <0 0x11270000 0 0x4000>,
> > +	      <0 0x11280000 0 0x0800>;
> > +	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> > +	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> > +	clocks = <&topckgen CLK_TOP_USB30_SEL>,
> > +		 <&pericfg CLK_PERI_USB0>,
> > +		 <&pericfg CLK_PERI_USB1>;
> > +	clock-names = "sys_mac",
> > +		      "wakeup_deb_p0",
> > +		      "wakeup_deb_p1";
> > +	phys = <&u3phy 0>, <&u3phy 1>;
> > +	phy-names = "phy-0", "phy-1";
> > +	vusb33-supply = <&mt6397_vusb_reg>;
> > +	vbus-supply = <&usb_p1_vbus>;
> > +	usb3-lpm-capable;
> > +	mediatek,usb-wakeup = <&pericfg>;
> > +	mediatek,wakeup-src = <1>;
> > +	mediatek,u2port-num = <2>;
> > +	status = "okay";
> > +};
> > -- 
> > 1.8.1.1.dirty
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1197924 — Re: [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller

hi,
On Fri, 2015-07-31 at 14:37 +0100, Mark Rutland wrote:
> Hi,
> 
> > > > + - mediatek,usb-wakeup: to access usb wakeup control register
> > > 
> > > What exactly does this property imply?
> > > 
> > There are some control registers for usb wakeup which are put in another
> > module, here to get the node of that module, and then use regmap and
> > syscon to operate it.
> 
> Ok. You need to specify the type of this property (i.e. that it is a
> phandle to a syscon node). The description makes it sound like a boolean.
> 
Is it ok to add a prefix of syscon, and name it syscon-usb-wakeup?

> > 
> > > > + - mediatek,wakeup-src: 1: ip sleep wakeup mode; 2: line state wakeup
> > > > +	mode; others means don't enable wakeup source of usb
> > > 
> > > This sounds like configuration rather than a hardware property. Why do
> > > you think this needs to be in the DT?
> > > 
> > Yes, it's better to put it in the DT. 
> 
> That doesn't answer my question.
> 
> _why_ do you think this needs to be in the DT? What do you think is
> better for it being there?
> 
It is unthoughtful to put it here;
There is different configuration on platforms, such as on tablet which
only needs line-state wakeup (because system can't enter suspend when
plug in usb cable, so don't need ip-sleep-wakeup to remote wakeup
system), and on box just needs ip-sleep wakeup mode. so it is better to
put in each board's dts.
 
> > 
> > > > + - mediatek,u2port-num: the number should not greater than the number
> > > > +	of phys
> > > 
> > > What exactly does this property imply?
> > > 
> > On some platform, it only makes use of partial usb ports, so disable
> > others to save power.
> 
> What exactly do you mean by "partial USB ports"?
> 
> If a phy isn't wired up, it won't be listed in the phys property, if it
> is then disabling it sounds like a run-time decision.
> 
Yes, you are right.
This confuse me a little before. It was a property of old phy driver at
first, and then ported it here, so did not remove it temp.
After I re-write the phy driver, I will remove it.

Thanks a lot.

> Thanks,
> Mark.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1189989 — [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173

add xHCI and phy drivers for MT8173-EVB

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..202b2b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pwrap {
@@ -211,3 +221,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..aa1ecc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
@@ -393,6 +394,36 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		usb: usb30@11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x4000>,
+			      <0 0x11280000 0 0x0800>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_mac",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&u3phy 0>, <&u3phy 1>;
+			phy-names = "phy-0", "phy-1";
+			usb3-lpm-capable;
+			mediatek,usb-wakeup = <&pericfg>;
+			mediatek,wakeup-src = <1>;
+			mediatek,u2port-num = <2>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x3000>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1192463 — Re: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173

hi
On Wed, 2015-07-22 at 21:11 +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 07/22/2015 05:05 PM, Chunfeng Yun wrote:
> 
> > add xHCI and phy drivers for MT8173-EVB
> 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
> >   arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
> >   2 files changed, 46 insertions(+)
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > index f433c21..202b2b9 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> > @@ -13,6 +13,7 @@
> >    */
> >
> >   /dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> >   #include "mt8173.dtsi"
> >
> >   / {
> > @@ -32,6 +33,15 @@
> >   	};
> >
> >   	chosen { };
> > +
> > +	usb_p1_vbus: fixedregulator@0 {
> 
>     Just "regulator@0" please. This is more in line with what ePAPR requires 
> from the node names.
> 
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "usb_vbus";
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> >   };
> >
> >   &pwrap {
> [...]
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 0696f8f..aa1ecc7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> [...]
> > @@ -393,6 +394,36 @@
> >   			#size-cells = <0>;
> >   			status = "disabled";
> >   		};
> > +
> > +		usb: usb30@11270000 {
> 
>     ePAPR standardizes the name "usb" for such nodes, please fix.
> 
> [...]
> 
ok, I'll revise it, thanks a lot

> MBR, Sergei
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web