Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1189727 > unrolled thread

[PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup

Started byYingjoe Chen <yingjoe.chen@mediatek.com>
First post2015-07-22 10:20 +0200
Last post2015-07-31 05:20 +0200
Articles 2 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup Yingjoe Chen <yingjoe.chen@mediatek.com> - 2015-07-22 10:20 +0200
    Re: [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT  when setup Yingjoe Chen <yingjoe.chen@mediatek.com> - 2015-07-31 05:20 +0200

#1189727 — [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup

FromYingjoe Chen <yingjoe.chen@mediatek.com>
Date2015-07-22 10:20 +0200
Subject[PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup
Message-ID<pOXpT-1bI-7@gated-at.bofh.it>
Spurious mtk timer interrupt is noticed at boot and cause kernel
crash. It seems if GPT is enabled, it will latch irq status even
when its IRQ is disabled. When irq is enabled afterward, we see
spurious interrupt.
Change init flow to only enable GPT_CLK_SRC at mtk_timer_init.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---

Update to my patch [1], added __init as Daniel suggest. This is the
only patch that need to change in that series, so I only sent this one.

http://lists.infradead.org/pipermail/linux-mediatek/2015-July/001545.html

 drivers/clocksource/mtk_timer.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 68ab423..2ba5b66 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -156,9 +156,11 @@ static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
 	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
 }
 
-static void
-mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
+static void __init mtk_timer_setup(struct mtk_clock_event_device *evt,
+				   u8 timer, u8 option, bool enable)
 {
+	u32 val;
+
 	writel(TIMER_CTRL_CLEAR | TIMER_CTRL_DISABLE,
 		evt->gpt_base + TIMER_CTRL_REG(timer));
 
@@ -167,8 +169,10 @@ mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
 
 	writel(0x0, evt->gpt_base + TIMER_CMP_REG(timer));
 
-	writel(TIMER_CTRL_OP(option) | TIMER_CTRL_ENABLE,
-			evt->gpt_base + TIMER_CTRL_REG(timer));
+	val = TIMER_CTRL_OP(option);
+	if (enable)
+		val |= TIMER_CTRL_ENABLE;
+	writel(val, evt->gpt_base + TIMER_CTRL_REG(timer));
 }
 
 static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
@@ -235,12 +239,12 @@ static void __init mtk_timer_init(struct device_node *node)
 	evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 
 	/* Configure clock source */
-	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
+	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN, true);
 	clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
 			node->name, rate, 300, 32, clocksource_mmio_readl_up);
 
 	/* Configure clock event */
-	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
+	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT, false);
 	clockevents_config_and_register(&evt->dev, rate, 0x3,
 					0xffffffff);
 
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]


#1196560 — Re: [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup

FromYingjoe Chen <yingjoe.chen@mediatek.com>
Date2015-07-31 05:20 +0200
SubjectRe: [PATCH v2 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup
Message-ID<pS91v-1yb-7@gated-at.bofh.it>
In reply to#1189727
On Wed, 2015-07-22 at 16:14 +0800, Yingjoe Chen wrote:
> Spurious mtk timer interrupt is noticed at boot and cause kernel
> crash. It seems if GPT is enabled, it will latch irq status even
> when its IRQ is disabled. When irq is enabled afterward, we see
> spurious interrupt.
> Change init flow to only enable GPT_CLK_SRC at mtk_timer_init.
> 
> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
> ---
> Update to my patch [1], added __init as Daniel suggest. This is the
> only patch that need to change in that series, so I only sent this one.
> 
> http://lists.infradead.org/pipermail/linux-mediatek/2015-July/001545.html


Hi Daniel, Thomas,

Any suggestions for mtk_timer fixes in this series?
Should I resend and add tags from the reviewers?

Joe.C


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web