Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1179802 > unrolled thread

Re: [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume  while we're dual-role Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2015-07-08 15:20 +0200

#1179802 — Re: [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role

Hello.

On 7/8/2015 1:37 PM, Roger Quadros wrote:

> We can't rely just on dr_mode to decide if we're in host or gadget
> mode when we're configured as otg/dual-role. So while dr_mode is
> OTG, we find out from  the otg state machine if we're in host
> or gadget mode and take the necessary actions during suspend/resume.

> Also make sure that we disable OTG irq and events during system suspend
> so that we don't lockup the system during system suspend/resume.

> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>   drivers/usb/dwc3/core.c | 27 +++++++++------------------
>   1 file changed, 9 insertions(+), 18 deletions(-)

> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e3c094d..3784287 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1444,18 +1444,15 @@ static int dwc3_suspend(struct device *dev)
>   		dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
>   		dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
>   		dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
> +		dwc3_writel(dwc->regs, DWC3_OEVTEN, 0);
> +		disable_irq(dwc->otg_irq);
>   	}
>
> -	switch (dwc->dr_mode) {
> -	case USB_DR_MODE_PERIPHERAL:
> -	case USB_DR_MODE_OTG:
> +	if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> +	    ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))

    Hum, enclosing the first == op into parens and not doing it to the second 
== op doesn't look very consistent... :-)

[...]
> @@ -1495,18 +1492,12 @@ static int dwc3_resume(struct device *dev)
>   		dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
>   		dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
>   		dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
> +		enable_irq(dwc->otg_irq);
>   	}
>
> -	switch (dwc->dr_mode) {
> -	case USB_DR_MODE_PERIPHERAL:
> -	case USB_DR_MODE_OTG:
> +	if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> +	    ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))

    Same here...

[...]

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web