Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1170187 > unrolled thread

Re: [PATCH v2 13/14] clk: shmobile: mstp: Consider "zb_clk" suitable for power management

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 13/14] clk: shmobile: mstp: Consider "zb_clk" suitable for  power management Michael Turquette <mturquette@linaro.org> - 2015-06-22 22:10 +0200
    Re: [PATCH v2 13/14] clk: shmobile: mstp: Consider "zb_clk" suitable  for power management Geert Uytterhoeven <geert@linux-m68k.org> - 2015-06-22 22:20 +0200

#1170187 — Re: [PATCH v2 13/14] clk: shmobile: mstp: Consider "zb_clk" suitable for power management

Quoting Geert Uytterhoeven (2015-05-28 11:53:38)
> Currently the CPG Clock Domain code looks for MSTP clocks to power
> manage a device.
> 
> Unfortunately, on R-Mobile APE6 (r8a73a4) and SH-Mobile AG5 (sh73a0),
> the Bus State Controller (BSC) is not power-managed by an MSTP clock,
> but by a plain CPG clock (zb_clk).  Add a special case to handle this,
> so the clock is properly managed, and devices connected to the BSC work
> as expected.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - New.
> ---
>  drivers/clk/shmobile/clk-mstp.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c
> index 619f3eccefd4884f..19e2b11953383587 100644
> --- a/drivers/clk/shmobile/clk-mstp.c
> +++ b/drivers/clk/shmobile/clk-mstp.c
> @@ -258,6 +258,10 @@ int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev)
>                                             "renesas,cpg-mstp-clocks"))
>                         goto found;
>  
> +               /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock*/
> +               if (!strcmp(clkspec.np->name, "zb_clk"))
> +                       goto found;

Hello Geert,

Is the driver the right place to handle this corner case? What do you
think about linking zb_clk up to the bsc devicetree node for
r8a73a4/sh73a0?

Regards,
Mike

> +
>                 of_node_put(clkspec.np);
>                 i++;
>         }
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1170189 — Re: [PATCH v2 13/14] clk: shmobile: mstp: Consider "zb_clk" suitable for power management

Hi Mike,

On Mon, Jun 22, 2015 at 10:05 PM, Michael Turquette
<mturquette@linaro.org> wrote:

Still sending email from Linaro, which will cause me to receive an autoreply?

> Quoting Geert Uytterhoeven (2015-05-28 11:53:38)
>> Currently the CPG Clock Domain code looks for MSTP clocks to power
>> manage a device.
>>
>> Unfortunately, on R-Mobile APE6 (r8a73a4) and SH-Mobile AG5 (sh73a0),
>> the Bus State Controller (BSC) is not power-managed by an MSTP clock,
>> but by a plain CPG clock (zb_clk).  Add a special case to handle this,
>> so the clock is properly managed, and devices connected to the BSC work
>> as expected.
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>> ---
>> v2:
>>   - New.
>> ---
>>  drivers/clk/shmobile/clk-mstp.c | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c
>> index 619f3eccefd4884f..19e2b11953383587 100644
>> --- a/drivers/clk/shmobile/clk-mstp.c
>> +++ b/drivers/clk/shmobile/clk-mstp.c
>> @@ -258,6 +258,10 @@ int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev)
>>                                             "renesas,cpg-mstp-clocks"))
>>                         goto found;
>>
>> +               /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock*/
>> +               if (!strcmp(clkspec.np->name, "zb_clk"))
>> +                       goto found;
>
> Hello Geert,
>
> Is the driver the right place to handle this corner case? What do you
> think about linking zb_clk up to the bsc devicetree node for
> r8a73a4/sh73a0?

It already is linked:

        bsc: bus@fec10000 {
                compatible = "renesas,bsc-r8a73a4", "renesas,bsc",
                    "simple-pm-bus";
                #address-cells = <1>;
                #size-cells = <1>;
               ranges = <0 0 0 0x20000000>;
               reg = <0 0xfec10000 0 0x400>;
                clocks = <&zb_clk>;
               power-domains = <&pd_c4>;
        };

        https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/r8a73a4.dtsi#n446

But without this hack in clk-mstp, the clock domain controller doesn't know
it can use this clock for power management like an ordinary mstp clock.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web