Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1742337
| From | Andrew Jeffery <andrew@aj.id.au> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v3 2/6] drivers: fsi: Add SBEFIFO FSI client device driver |
| Date | 2017-09-29 22:40 +0200 |
| Message-ID | <uvaeK-2D7-19@gated-at.bofh.it> (permalink) |
| References | <usDmV-2EF-5@gated-at.bofh.it> <usDmW-2EF-17@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Eddie, On Sat, 23 Sep 2017, at 06:35, Eddie James wrote: > From: "Edward A. James" <eajames@us.ibm.com> > > IBM POWER9 processors contain some embedded hardware and software bits > collectively referred to as the self boot engine (SBE). One role of > the SBE is to act as a proxy that provides access to the registers of > the POWER chip from other (embedded) systems. > > The POWER9 chip contains a hardware frontend for communicating with > the SBE from remote systems called the SBEFIFO. The SBEFIFO logic > is contained within an FSI CFAM and as such the driver implements an > FSI bus device. > > The SBE expects to communicate using a defined wire protocol; however, > the driver knows nothing of the protocol and only provides raw access > to the fifo device to userspace applications wishing to communicate with > the SBE using the wire protocol. > > The SBEFIFO consists of two hardware fifos. The upstream fifo is used > by the driver to transfer data to the SBE on the POWER chip, from the > system hosting the driver. The downstream fifo is used by the driver to > transfer data from the SBE on the power chip to the system hosting the > driver. > > Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> > Signed-off-by: Edward A. James <eajames@us.ibm.com> > --- > drivers/fsi/Kconfig | 7 + > drivers/fsi/Makefile | 1 + > drivers/fsi/fsi-sbefifo.c | 861 > ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 869 insertions(+) > create mode 100644 drivers/fsi/fsi-sbefifo.c My general feeling is the implementation is too complex by half for what is required. I may be wrong and the solution genuinely needs the complexity, but to test that I'll cook up a counter-proposal patch and we can debate that. I'm away for the next few days, but I hope to send something by the end of next week. Cheers, Andrew
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH v3 2/6] drivers: fsi: Add SBEFIFO FSI client device driver Andrew Jeffery <andrew@aj.id.au> - 2017-09-29 22:40 +0200
csiph-web