Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1741110

[PATCH 11/12] dt-bindings: usb: mtu3: remove dummy clocks and add optional ones

Show all headers | View raw

Remove dummy clocks for usb wakeup and add optional ones for
mcu_bus and dma_bus bus.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 .../devicetree/bindings/usb/mediatek,mtu3.txt      |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 7c611d1..49c982b 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -14,9 +14,9 @@ Required properties:
  - vusb33-supply : regulator of USB avdd3.3v
  - clocks : a list of phandle + clock-specifier pairs, one for each
 	entry in clock-names
- - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
-	"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
-	depends on "mediatek,enable-wakeup"
+ - clock-names : must contain "sys_ck" for clock of controller,
+	the following clocks are optional:
+	"ref_ck", "mcu_ck" and "dam_ck";
  - phys : a list of phandle + phy specifier pairs
  - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt
@@ -65,9 +65,7 @@ ssusb: usb@11271000 {
 	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
 		 <&pericfg CLK_PERI_USB0>,
 		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck",
-		      "wakeup_deb_p0",
-		      "wakeup_deb_p1";
+	clock-names = "sys_ck", "ref_ck";
 	vusb33-supply = <&mt6397_vusb_reg>;
 	vbus-supply = <&usb_p0_vbus>;
 	extcon = <&extcon_usb>;
-- 
1.7.9.5

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 01/12] usb: mtu3: fix error return code in ssusb_gadget_init() Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:00 +0200
  [PATCH 09/12] usb: mtu3: set invalid dr_mode as dual-role mode Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:00 +0200
  [PATCH 06/12] usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switch Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:00 +0200
  [PATCH 03/12] usb: mtu3: remove dummy wakeup debounce clocks Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:10 +0200
  [PATCH 02/12] usb: mtu3: support option to disable usb3 ports Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:10 +0200
  [PATCH 04/12] usb: mtu3: add optional mcu and dma bus clocks Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:10 +0200
  [PATCH 05/12] usb: mtu3: support 36-bit DMA address Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-27 13:10 +0200
  [PATCH 11/12] dt-bindings: usb: mtu3: remove dummy clocks and add optional ones Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-28 02:20 +0200
  [PATCH 12/12] dt-bindings: usb: mtu3: remove optional pinctrls Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-28 02:20 +0200
  [PATCH 10/12] dt-bindings: usb: mtu3: add a optional property to disable u3ports Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-09-28 02:20 +0200
  Re: [PATCH 01/12] usb: mtu3: fix error return code in  ssusb_gadget_init() Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2017-09-30 15:10 +0200

csiph-web